HP 3000 Manuals

Configuring Systems for Terminals, Printers, and Other Serial Devices

Chapter 4  Dynamic Configuration and DTS Shutdown/Restart 

This chapter describes how you can make most DTS configuration changes
dynamically using NMMGR without rebooting the system (herein referred to
as dynamic configuration.  Such configuration changes include
adding/deleting/modifying terminals, printers, and DTCs.

This chapter also discusses the DTS subsystem shutdown and restart
capabilities provided through the DTCCNTRL command.

Refer to chapters 5 and 6 for detailed steps on the DTS configuration
process for host-based and PC-based DTC management, respectively.


NOTE  To automatically add/configure a host-based managed DTC to DTS
      without needing to specify detailed configuration information such
      as DTC cards/boards and ldevs, refer to chapter 3.  To
      manage/dynamically configure host-based X.25 links, refer to
      Configuring and Managing Host-Based X.25 Links (36939-61004).

MPE/iX 5.5 Documentation