HP 3000 Manuals

TurboIMAGE/XL Database Management System Reference Manual

Chapter 9  Using a Remote Database 
[REV BEG]

You can access a TurboIMAGE/XL database that resides on one HP 3000
computer system while operating a session on another HP 3000 computer
system if both systems are configured with Network Services capability.
You can access a TurboIMAGE/V database from an MPE/iX system or a
TurboIMAGE/XL database from an MPE V system.  Programmatically accessing
an IMAGE/3000 database from a TurboIMAGE/XL database requires another MPE
V system with NS/3000 and TurboIMAGE/V acting as an intermediate node.
The limits on the remote database must not exceed those allowed on the
local system, or programmatic access will not be successful.

You can use a database on a remote HP 3000 either from a program that is
running on the remote system or from a program running on your local HP
3000.  There are various ways to open a communications line and initiate
a remote session.  For example, you can establish a remote session
through a communications link then run a remote program accessing a
database on the remote machine as illustrated in Figure 9-1 .[REV END]


          Figure 9-1.  Using a Remote Program 

For details about using this method, refer to the NS3000/XL 
User/Programmer Reference Manual.

MPE/iX 5.0 Documentation