HP 3000 Manuals HP 3000 Manuals
Hardware
Requirements
HP EDIT processes 16-bit characters on MPE/XL systems and operates in
Native Mode.
HP EDIT can process Asian characters on the following terminals:
* HP 700/92A Terminal
* HP part number C1010-TKC for use in Korea, Taiwan, and the
People's Republic of China.
* HP part number C1010-TKJ for use in Japan.
* Asian HP Vectra
* For use in Korea, Taiwan, and the People's Republic of China.
* The Asian HP Vectra requires Advancelink B.
* HP Vectra/AX
* HP part number 45970C-AX for use in Japan.
* The HP Vectra/AX requires Advancelink/AX.
Restrictions
Hewlett-Packard does not recommend using HP EDIT in network environments
that do not support a highly interactive dialog between the user and the
host machine. This precludes networks, such as X.25, which have a large
amount of lag time (greater than one-half second) and which use separate
transmissions for prompting and reading responses. Hewlett-Packard also
recommends that you do not use HP EDIT on heavily loaded systems or those
burdened with a large number of terminals.