HP 3000 Manuals HP 3000 Manuals
>RESUME
The >RESUME command re-activates duplication after a backup has been
completed.
SYNTAX
>RESUME
DISCUSSION
The >RESUME command re-activates Silhouette on the secondary system.
Duplication continues where it left off when the >BACKUP command was
issued.
NOTE Issuing the >RESUME command cancels a >STOP or >BACKUP command
waiting for a quiet period.
EXAMPLE
The following example shows resuming duplication on the secondary system
following a backup. The STATUS report shows that the secondary system
logfile has been brought up-to-date with the logfile on the primary
system.
>BACKUP
Backup reqst to CP: A Back-up request is already pending.
>RESUME
Tell RP to resume: Successful execution of function / request.
>STATUS
============== S i l h o u e t t e S T A T U S ================
1:37:55
* PRIMARY SECONDARY
- - - - - - - - - - - - - - - - - - + - - - - - - - - - - - - - - - - - - -
LOGFILE record # = 4675 (001) | LOGFILE record # = 4675 (001)
time = 1:34:54 | time = 1:34:54
|
outstanding= 0 recs | FLAGS
max ever = 4674 recs |
|
SENT logical = 4675 recs | DATABASE opens = 0 paths
physical = 198 blocks | transact. = 0 outst.
| Open mode = 4 UNLOCK
|
[ current status] | [ current status ]
- - - - - - - - - - - - - - - - - - + - - - - - - - - - - - - - - - - - - -
LINES OPEN : MPEXL950
===========================================================================
>
ADDITIONAL DISCUSSION
See Chapter 3.