HP 3000 Manuals HP 3000 Manuals
Appendix A VTAM Examples This appendix contains sample VTAM configurations for HP peripheral nodes with HP's SNA products installed. Each of these sample configurations is based on the following: * ACF/NCP version 3, release 2 * ACF/VTAM version 3, release 2 * X.25 NPSI version 2, release 1 or later (for the IBM 3725) * X.25 NPSI version 3 or later (for the IBM 3745) Required parameters that have changed in later releases are documented in notes. To ensure that the host configuration is compatible with HP's SNA products, there are values that HP requires for some operands. These values are noted in this chapter. Certain operands are required, but no specific value for the operand is required. Required parameters must be coded as specified. Variable parameters must be set within the constraints defined by HP and the host.
CAUTION HP requires that the host be configured as defined in chapter 1 of this manual. Any HP time spent solving problems related to incorrect configuration of the host is billable to the customer on a time and materials basis. The configuration listings must be available for your HP representative in case your installation requires servicing.