HP 3000 Manuals HP 3000 Manuals
JES3 Parameter Descriptions
Global JES3 Parameters
Note that the global parametersand subparameters described below have
special implications for the SNA NRJE workstation definitions.
BUFFER.
BUFSIZE=nnnn Thelength, in bytes, of each record in spool
data sets. The value must be a multiple of
four.
Range: 1024-4048
Default: 1248
COMMDEFN.
APPLID=JES3 Thejob entry subsystem VTAM is expecting.
Default: JES3
P=password Thismust match the password given for the VTAM
parameter PRTCT of the APPL application
definition statement.
LU=nnnn Thismust be greater than or equal to the total
number of LU-LU sessions that can exist at any
one time between the host and its defined
workstations.
Range: 1-4095
Default: 255
SYSOUT.
CHNSIZE=nn Thesize of the RU chain to be transmitted to
SNA workstations. To send the entire data set
as a single chain, specify DS.
Range: 1-255
Recommended value: DS
Default: DS
OUTSERV.
CDSTOCK=formname Thestandard form for punch output.
Recommended value: This parameter (CDSTOCK)
should match the FORMS parameter (described
below). This makes SNA NRJE Job Management
easier to use.
Default: 5081
FORMS=formname Thestandard form for printer output.
Recommended value: This parameter (FORMS)
should match theCDSTOCK parameter (described
above). This makes SNA NRJE Job Management
easier to use.
Default: 1PRT
JES3 Macros and Parameters
CONSOLE.
JNAME=name Thename of the SNA remote job processing (RJP)
workstation, as given in the RJPWS macro.
TYPE=RJP Definesthis workstation as an RJP workstation.
DEST=destcode Thetype of console messages this console is to
receive. NONE specifies that this console is
to receive no console messages and can respond
as an entry device.
Recommended value: NONE
LL=nnn Theconsole line length.
Recommended value: 80
Default: 120
LEVEL=nn Thelevel of authority for the console.
Commands allowed at this console are determined
by the authority level.
Range: 0-15
Recommended value: 10
Default: 0
DEVICE.
CHNSIZE=nnn Thesize of the RU chain to be transmitted to
SNA workstations. To send the entire data set
as a single chain, specify DS. A CHNSIZE value
specified in the SYSOUT global parameter
(described earlier in this chapter) will
override all the CHNSIZE values specified in
this macro (DEVICE).
Range: 1-255
Recommended value: DS
Default: DS
CKPNT=nnnn Specifiesthat a checkpoint is taken after the
specified number of records ( nnnn).
Recommended value: 1000
Default: Determined by type of printer or
punch.
DTYPE=RMTxxxxx Specifieswhether the device is a printer or a
punch.
Required value for printers: RMTPRINT
Required value for punches: RMTPUNCH
FORMS=forms Indicateswhether the forms can be changed
during writer execution (YES or NO), and
designates the initial form to be mounted on
the printer. STANDARD means that whatever is
specified on the OUTSERV global parameter is to
be used.
Recommended value: (YES,STANDARD)
Default: (YES,STANDARD)
JNAME=name Thename of the SNA RJP workstation, as given in
the RJPWS macro (described below).
SELECT=EX1 Required for an exchange device.
RJPWS.
N=ccccc Thefive-character name (ccccc) of the
workstation.
RD=n Themaximum number of logical readers.
Recommended range: 1-7
Recommended value: 7
Default: 1
PR=nn Themaximum number of logical printers at this
workstation.
Range: 1-7
Default: 1
PU=nn Themaximum number of logical punches at this
workstation.
Range: 0-7
Default: 0
C=R Thetype of console support for the workstation
devices. R must be specified to indicate that
the printer and console are separate devices.
This also means that JES3 will interrupt data
streams to send console messages.
COMPACT=NO Specifiesno default compaction.
Default: NO
G=groupname Thisis used for the group name facility.
P=password Thepassword that must be entered when this
workstation logs on.
PL=n Thenumber of invalid logons that can be tried
before the workstation is rejected.
Range: 0-9
Recommended value: 2
Default: 2
AUTO=N N specifiesthat no automatic logon is allowed.
LU=luname Do not specify this parameter.
LEVEL=nn Thelevel of authority for the console.
Commands allowed at this console are determined
by the authority level.
Range: 0-15
Recommended value: 10
Default: 0