HP 3000 Manuals HP 3000 Manuals
Data Required from the Host Configuration
Data in an SNA node configuration file must correspond to information
from the host configuration. So, before using NMMGR, you should have
certain information from the host configuration.
The host information that corresponds to SNA node configuration
information for SNA/SDLC links, SNA/X.25 links, and SNA/Token Ring links
is described below.
SNA/SDLC Information
For the host and the HP 3000 to communicate, you must coordinate the
SNA/SDLC node configuration with the ACF/NCP and ACF/VTAM host
configurations. The HP SNA Products Remote System Configuration Guide
(J2220-61025) explains these configurations. Table 2-1 shows the
relationships between items from the host configuration and items in the
SNA node configuration file for an SNA/SDLC link. Each NMMGR screen
field is described later in this chapter.
Table 2-1. Host ACF/NCP and ACF/VTAM Values for SDLC
----------------------------------------------------------------------------------
| | | |
| Host Configuration Macro | Field in NMMGR Screen | NMMGR Screen Name |
| and Operand | | |
| | | |
----------------------------------------------------------------------------------
| | | |
| LINE SPEED | Transmission Speed | SDLC Link Data |
| | | |
| NRZI | NRZI | SDLC Link Data |
| | | |
----------------------------------------------------------------------------------
| | | |
| PU puname | SNA Node Name | Configuration |
| | | |
| | New Name | Configuration |
| | | |
| ADDR | Station ID | SDLC Link Data |
| | | |
| IDBLK | ID BLK | PU Data |
| | | |
| IDNUM | ID NUM | PU Data |
| | | |
| MAXDATA | MAX DATA | PU Data |
| | | |
| PUTYPE | Node Type | PU Data |
| | | |
| XID | Node Type | PU Data |
| | | |
----------------------------------------------------------------------------------
| | | |
| LU luname | LU Name | LU Data |
| | | |
| LOCADDR | LU# | LU Data |
| | | |
----------------------------------------------------------------------------------
SNA/X.25 Information
For the host and the HP 3000 to communicate, you must coordinate the
SNA/X.25 node configuration with the host configuration. The HP SNA
Products Remote System Configuration Guide (J2220-61025) explains this
configuration.
Table 2-2 shows the relationships between items from the host
configuration and items in the SNA node configuration file for permanent
virtual circuits (PVCs). Each NMMGR screen field is described later in
this chapter.
Table 2-2. Host Macro Values for X.25 Link PVC
----------------------------------------------------------------------------------
| | | |
| Host Configuration Macro | Field in NMMGR Screen | SNA Node NMMGR Screen |
| and Operand | | |
| | | |
----------------------------------------------------------------------------------
| | | |
| X25.LINE TYPE | Virtual Circuit Type | X.25 Link Data |
| | | |
----------------------------------------------------------------------------------
| | | |
| X25.PU puname | SNA Node Name | Configuration |
| | | |
| | New Name | Configuration |
| | | |
| PUTYPE | Node Type | PU Data |
| | | |
| MAXDATA | MAX DATA | PU Data |
| | | |
----------------------------------------------------------------------------------
| | | |
| X25.LU luname | LU Name | LU Data |
| | | |
| LOCADDR | LU# | LU Data |
| | | |
----------------------------------------------------------------------------------
Table 2-3 shows the relationships between items from the host
configuration and items in the SNA node configuration file for switched
virtual circuits (SVCs) of an SNA/X.25 link. Each NMMGR screen field is
described later in this chapter.
Table 2-3. Host Macro Values for X.25 Link SVC
----------------------------------------------------------------------------------
| | | |
| Host Configuration Macro | Field in NMMGR Screen | SNA Node NMMGR Screen |
| and Operand | | |
| | | |
----------------------------------------------------------------------------------
| | | |
| X25.LINE TYPE | Virtual Circuit Type | X.25 Link Data |
| | | |
| CALL | Call Direction | X.25 Link Data |
| | | |
----------------------------------------------------------------------------------
| | | |
| PATH DIALNO | Remote's X.25 Network | X.25 Link Data |
| | Address | |
| | | |
----------------------------------------------------------------------------------
| | | |
| PU puname | SNA Node Name | Configuration |
| | | |
| | New Name | Configuration |
| | | |
| IDBLK | ID BLK | PU Data |
| | | |
| IDNUM | ID NUM | PU Data |
| | | |
| MAXDATA | MAX DATA | PU Data |
| | | |
----------------------------------------------------------------------------------
| | | |
| LU luname | LU Name | LU Data |
| | | |
| LOCADDR | LU# | LU Data |
| | | |
----------------------------------------------------------------------------------
Table 2-4 shows the relationships between items from the host
configuration and items in the X.25 System Access configuration. The HP
SNA Products Remote Sytem Configuration Guide (J2220-61025) explains the
host configuration. See the appropriate NS documentation for more
information about the X.25 System Access configuration.
Table 2-4. Host Macro Values for X.25 System Access
----------------------------------------------------------------------------------
| | | |
| Host Configuration Macro | Field in NMMGR Screen | Network Services NMMGR |
| | | Screen |
| | | |
----------------------------------------------------------------------------------
| | | |
| X25.OUFT INDEX | Set Name | X.25 User Facility Sets |
| | | |
----------------------------------------------------------------------------------
Note that once the facility set to be used by SNA/X.25 Link is specified
in the INDEX operand of the X25.OUFT host macro, it must also be
referenced by the OUFINDX operand of the X25.LINE host macro.
Table 2-5 shows the relationship between items from the host
configuration and items in the DTC Manager configuration. The HP SNA
Products Remote System Configuration Guide (J2220-61025) explains the
host configuration. See the appropriate DTC documentation for more
information about the DTC Manager configuration through OpenView.
Table 2-5. Host Macro Values for DTC Manager (X.25)
----------------------------------------------------------------------------------
| | | |
| Host Configuration Macro | Field in OpenView Screen | DTC Manager OpenView |
| and Operand | | Screen |
| | | |
----------------------------------------------------------------------------------
| | | |
| X25.VCCPT VWINDOW | Window Size | X.25 Level 3 |
| | | |
----------------------------------------------------------------------------------
NOTE Although it is not an X.25 standard requirement, we recommend that
the value specified in the Window Size field match the VWINDOW
operand of the X25.VCCPT host macro.
Table 2-6 shows the relationship between items from the host
configuration and items in the DTS configuration (for NS host-based
network management). The HP SNA Products Remote System Configuration
Guide (J2220-61025) explains the host configuration. See the appropriate
NS host-based network management documentation for more information about
the DTS configuration through OpenView.
Table 2-6. Host Macro Values for DTS Config. (X.25)
----------------------------------------------------------------------------------
| | | |
| Host Configuration Macro | Field in NMMGR Screen | DTS NMMGR Screen |
| and Operand | | |
| | | |
----------------------------------------------------------------------------------
| | | |
| X25.VCCPT VWINDOW | Window Size | DTC X.25 Card Config - |
| | | Level 3 & Miscellaneous |
| | | |
----------------------------------------------------------------------------------
SNA/Token Ring Information
For the host and the HP 3000 to communicate, you must coordinate the
SNA/Token Ring node configuration with the ACF/NCP and ACF/VTAM host
configurations. The HP SNA Products Remote System Configuration Guide
(J2220-61025) explains these configurations. Table 2-7 shows the
relationships between items from the host configuration and items in the
SNA node configuration file for an SNA/Token Ring link. Each NMMGR
screen field is described later in this chapter.
Table 2-7. Host Macro Values for Token Ring
----------------------------------------------------------------------------------
| | | |
| Host Configuration Macro | Field in NMMGR Screen | NMMGR Screen Name |
| and Operand | | |
| | | |
----------------------------------------------------------------------------------
| | | |
| LINE LOCADD | Remote Station Address | Token Ring Link Data |
| | | |
----------------------------------------------------------------------------------
| | | |
| PU puname | SNA Node Name | Configuration |
| | | |
| | New Name | Configuration |
| | | |
| IDBLK | ID BLK | PU Data |
| | | |
| IDNUM | ID NUM | PU Data |
| | | |
| MAXDATA | MAX DATA | PU Data |
| | | |
----------------------------------------------------------------------------------
| | | |
| LU luname | LU Name | LU Data |
| | | |
| LOCADDR | LU# | LU Data |
| | | |
----------------------------------------------------------------------------------