0 | Successful or end-of-file (EOF) |
1 | Illegal DB register setting |
2 | Illegal capability |
3 | Required parameter missing |
4 | Disk space allocation disabled on all domain disks |
5 | DRT number >511 |
6 | Device has no spare blocks available |
7 | Unformatted or uninitialized media on device |
8 | Illegal parameter value |
9 | Invalid file type specified in foption |
10 | Invalid record size specification |
11 | Invalid resultant block size |
12 | Record number out of range |
13 | Cannot open file multiaccess |
15 | Exceeded maximum file opens for write access |
16 | More than 255 opens of a file |
17 | Magnetic tape runaway |
18 | Device powered up |
19 | Forms control was reset |
20 | Invalid operation requested (for example, terminal type set
to -24 which is an invalid entry) |
21 | Data parity error |
22 | Timeout (read timeout value set with FCONTROL itemnum=4) |
23 | End-of-tape |
24 | Device not ready; not online, modem dsr signal not "high",
or line disconnected) |
25 | No write ring on tape |
26 | Transmission error |
27 | I/O timeout; block mode read timer expired (timer set by
system, not user changeable) |
28 | Timing error; data arrived at controller faster than it
could be serviced (data overrun) |
29 | Start I/O (SIO) failure |
30 | Unit failure |
31 | End-of-line (EOL) special character terminator or additional
end-of-record (AEOR) character (defined by FCONTROL
itemnum=25) |
32 | Software abort of I/O operation (for example, an
ABORTIO command was entered) |
33 | Data lost or no buffer available |
34 | Unit not online |
35 | Data set not ready |
36 | Invalid disk address |
37 | Invalid memory address |
38 | Tape parity error |
39 | Recovered tape error |
40 | Operation inconsistent with access type |
41 | Operation inconsistent with record type |
42 | Operation inconsistent with device type (for example,
attempted to set an invalid line speed through FCONTROL
itemnum=11) |
43 | Write exceeds record size |
44 | Update at record zero |
45 | Privileged file violation |
46 | Out of disk space |
47 | I/O error on a file label |
48 | Invalid operation; multiple file access |
49 | Unimplemented function |
50 | Nonexistent account |
51 | Nonexistent group |
52 | Nonexistent permanent file |
53 | Nonexistent temporary file |
54 | Invalid file reference |
55 | Device unavailable |
56 | Invalid device specification |
57 | Out of virtual memory |
58 | No file passed |
59 | Standard label violation |
60 | Global RIN not available or insufficient system resources |
61 | Out of group disk space |
62 | Out of account disk space |
63 | No nonshareable device capability |
64 | Program not prepared with multiple RIN capability |
66 | Plotter limit switch reached |
68 | Insufficient system resources |
69 | I/O error |
70 | I/O error while printing header/trailer, or an
FOPEN or FCLOSE failed |
71 | Too many files open |
72 | Invalid file number |
73 | Bounds violation |
74 | No room in stack for file entry |
77 | Nowait I/O operation pending |
78 | No nowait I/O pending for any file |
79 | No nowait I/O pending for any special file |
80 | Spoolfile size exceeds configuration |
81 | No spool class defined in system |
82 | Insufficient space in spool class for I/O request |
83 | I/O error on spoolfile |
84 | Device unavailable for spoolfile |
85 | Operation inconsistent with spooling (for example, attempt
to read hardware status) |
86 | Spooling internal error |
87 | Bad spoolfile block |
88 | Nonexistent spoolfile |
89 | Power failure |
90 | Exclusive violation; file being accessed |
91 | Exclusive violation; file accessed exclusively |
92 | Lockword violation |
93 | Security violation |
94 | User not creator |
95 | Read not completed; the terminal user pressed BREAK
(The user must enter the RESUME command to continue. The file
system sees the restart, the application does not.) |
96 | Disk I/O error |
97 | No control-Y PIN |
98 | Read timer overflow; read exceeded maximum capacity of read
timer (655.35 seconds) |
99 | BOT and backspace tape |
100 | Duplicate permanent file name |
101 | Duplicate temporary file name |
102 | I/O error on directory |
103 | Permanent directory overflow |
104 | Temporary directory overflow |
105 | Bad variable block structure |
106 | Extent size exceeds maximum |
107 | Insufficient space for user labels |
108 | Invalid file label |
109 | Invalid carriage control |
110 | Attempt to save permanent file as temporary |
111 | No save files (SF) capability |
112 | No mountable volumes (UV) capability |
113 | Volume set not mounted; mount problem |
114 | Volume set not dismounted; dismount problem |
115 | Attempted rename across volume sets rejected |
116 | Invalid tape label FOPEN/HPFOPEN parameters |
117 | Attempted write on an unexpired tape file |
118 | Invalid header or trailer tape label |
119 | I/O error positioning tape for tape labels |
120 | Attempted write on an IBM standard tape label |
121 | Tape label lockword violation |
122 | Tape label table overflow |
123 | End of tape volume set |
124 | Attempt to append labeled tape |
125 | Expiration date later than preceding file |
126 | Character set number must be between 0 and 31 |
127 | Form number must be between 0 and 31 |
128 | Logical page number must be between 0 and 31 |
129 | Vertical format number must be between 0 and 31 |
130 | Number of copies must be between 1 and 32,767 |
131 | Number of overlays must be between 1 and 8 |
132 | Page length parameter must be between 12 (=3) and 68 (=17) |
133 | Picture number must be between 0 and 31 |
134 | Extended capability parameter must be 0 (OFF) or 1 (ON) |
137 | Defective track on foreign disk |
138 | Track does not exist on foreign disk |
139 | Deleted record on IBM diskette |
148 | Inactive RIO record |
149 | Missing item number or return variable |
150 | Invalid itemnum |
151 | Undefined file type |
152 | Unrecognized option in FOPEN/HPFOPEN
device parameter |
153 | Expecting semicolon (;) or carriage return in
FOPEN/HPFOPEN device parameter |
154 | Environment file open error |
155 | File not environment file; check file code or record size |
156 | Header record incorrect |
157 | Uncompiled environment file |
158 | Error reading environment file |
159 | Error closing environment file |
160 | Error doing FDEVICECONTROL from environment file |
161 | Too many parameters in device string overflow |
162 | Expecting "=" after option in device parameter |
163 | Incorrect ENV backreference in file equation |
164 | Device parameter too large or missing carriage return |
165 | Invalid density specification |
166 | FFILEINFO failed while accessing remote spoolfile |
167 | Spoolfile label error; cannot insert environment file name |
168 | Item not supported on remote system |
170 | Record marked deleted; pointer positioned to a record marked for deletion |
171 | (KSAM) Duplicate key value not allowed |
172 | (KSAM) Key not found; invalid key value |
173 | (KSAM) tcount parameter larger than record size |
174 | (KSAM) Cannot get extra data segment |
175 | (KSAM) Internal KSAM error |
176 | (KSAM) Illegal extra data segment |
177 | (KSAM) Too many extra data segments for this process |
178 | (KSAM) Not enough virtual memory for extra data segment |
179 | (KSAM) File must be locked before issuing this intrinsic |
180 | (KSAM) KSAM file must be rebuilt; KSAM version does not
handle a file built by previous version |
181 | (KSAM) Invalid key starting position |
182 | (KSAM) File empty |
183 | (KSAM) Record does not contain all keys |
184 | (KSAM) Invalid record number |
185 | (KSAM) Sequence error in primary key |
186 | (KSAM) Invalid key length |
187 | (KSAM) Invalid key specification |
188 | (KSAM) Invalid device specification |
189 | (KSAM) Invalid record format |
190 | (KSAM) Invalid key blocking factor value |
191 | (KSAM) Record does not contain search key for deletion;
specified key value points to record not containing that value |
192 | (KSAM) System failure occurred while KSAM file was opened |
193 | (KSAM) $STDIN/$STDLIST cannot be redirected to KSAM files |
194 | (KSAM) KSAM files not allowed for global AFTs |
196 | (KSAM) Language not supported |
197 | (KSAM) native language internal error |
198 | (KSAM) Invalid version number in KSAM file |
201 | (DS) Unable to access DSLINE table |
204 | (DS) Unable to allocate an extra data segment for DS/DSN 3000 |
205 | (DS) Unable to expand the DS/DSN 3000 extra data segment |
214 | (DS) Requested DS line has not been opened with a DSLINE command |
216 | (DS) Message rejected by remote computer |
217 | (DS) Insufficient amount of user stack available |
221 | (DS) Internal DS error; invalid message format |
224 | File equations for a remote file constitute a loop |
227 | RFA/RDBA could not find or create a remote session |
239 | Communication interface error; trace malfunction |
240 | (DS) Local communication line not opened by operator |
241 | (DS) DS line in use exclusively or by another subsystem |
242 | (DS) Internal DS software malfunction |
243 | (DS) Remote computer not responding |
246 | Communications interface error; remote computer disconnected |
249 | Communications interface error; unable to enter remote session |
255 | Communications interface error; connection lost |
302 | Invalid item number for FDEVICECONTROL |
303 | Invalid access for item number to FDEVICECONTROL |
304 | Attempt to change terminal parity in 8-bit mode |
305 | Invalid format in terminal configuration file |
306 | Checksum error in terminal configuration file |
307 | Passed value to FDEVICECONTROL less than minimum |
308 | Passed value to FDEVICECONTROL greater than maximum |
309 | Passed value to FDEVICECONTROL is unsupported |
310 | Count to FDEVICECONTROL insufficient for return information |
311 | Count to FDEVICECONTROL greater than available store information |
312 | Passed special character has previously defined function |
313 | Incompatible version of the file |
350 | KSAM lock table full |
351 | Too many record locks in one process |
352 | Record was locked already |
353 | File must be unlocked before issuing this intrinsic |
354 | Data integrity violation |
355 | File is locked by another process |
356 | Lock request rejected due to potential deadlock |
357 | Data may be invalid because file is locked by others |
391 | Name cannot be expressed using the specified syntax |
392 | Rename for the given file type is not supported |
393 | UID-GID database could not be found |
394 | User information not found in uid database |
395 | Group information not found in gid database |
396 | User lacks read acd (racd) access |
397 | A component in the pathname is not a directory |
398 | User lacks traverse directory (td) access |
399 | File attributes are not expressible as foptions |
400 | Name syntax specified is invalid |
401 | Unknown system file specified |
402 | Invalid character found in mpe syntax name |
403 | Wild card characters found in file name |
404 | Backreferenced file is not allowed |
405 | System files are not allowed |
406 | Remote environment specification is not allowed |
407 | Invalid usage of a character class |
408 | Missing file name component |
409 | File name did not start with an alphabetic characte |
410 | Specified file name is too long |
411 | Lockword in backreferenced file name is not allowed |
412 | Lockword in wildcarded file name is illegal |
413 | Lockword is missing |
414 | Lockword did not start with an alphabetic character |
415 | Specified lockword is too long |
416 | Group name is missing |
417 | Group name did not start with an alphabetic character |
418 | Specified group name is too long |
419 | Account name is missing |
420 | Account name did not start with alphabetic character |
421 | Specified account name is too long |
422 | Remote environment specification is invalid |
423 | NS3000 is not present on the system |
424 | Remote environment specification is missing |
425 | Remote environment specification is too long |
426 | HFS name component is too long |
427 | HFS pathname is too long |
428 | HFS pathname exceeded the number of levels supported |
429 | HFS pathname began with hyphen (-) character |
430 | HFS pathname began with two slashes (//) |
431 | Lower case characters are not allowed |
432 | Wild carded name may match an incorrect syntax |
433 | Specified name is not identifiable in any syntax |
434 | Lockword specification is not allowed |
435 | Illegal attempt to escape into hfs syntax from an mpe-only syntax name |
436 | Illegal character found in hfs pathname |
451 | The specified file code is invalid in this context |
452 | File privilege level is invalid in this context |
453 | The specified file is write protected |
454 | The specified record type is invalid |
455 | The file type specified is invalid |
456 | File type specified is only supported in MPE namespace |
457 | Component of path does not exist |
458 | Trying to read/write to a pipe or FIFO and O_NONBLOCK is set |
459 | Trying to write to a pipe but it was not opened for read |
460 | Specified file domain not supported in the given namespace |
461 | User lacks create directory (CD) access |
462 | User lacks delete directory (DD) access |
463 | Write access disabled on device media |
464 | Too many symbolic links encountered in the pathname |
465 | Unable to create FLOD data structure |
466 | Unable to delete FLOD data structure |
467 | Unable to issue another lock request, limit reached |
468 | Internal HPFLOCK error |
469 | File was opened with dynamic locking, use FLOCK |
470 | Lock held by another process, request denied |
471 | No FLOD exists, incompatible file type |
472 | No such lock exists |
473 | Whence parameter out of bounds |
474 | Length parameter out of bounds |
475 | Start parameter out of bounds |
476 | Internal HPFLOCK error |
477 | Lock extends beyond the file limit |
478 | Internal HPFLOCK error, flod marked invalid |
479 | No GUFD exists, incompatible file type |
480 | No GDPD exists, incompatible file type |
481 | Command parameter out of bounds |
482 | Lock parameter out of bounds |
483 | PIN parameter out of bounds |
484 | Interrupt occured while waiting for lock |
485 | Size parameter out of bounds |
486 | Invalid file type |
487 | Lock type and file access incompatible |
488 | Conflicting read format |
489 | Tthe file type is not a symbolic link file |
490 | Tried to reply to waiters and none were found |
491 | Trying to deallocate a PLFD that is locked by another thread |
492 | Trying to deallocate a PLFD that isn't locked by your thread |
493 | An invalid operation for threads |
494 | A read or write operation was interrupted by a signal |
495 | Exec call failed because a file could not be closed |
496 | Open was interrupted by a signal and wasn't completed |