Data Files
MPE documents | |
 Complete PDF | |
| Table of Contents | |
| Index | |
| E0802 Edition 6 | |
| E0701 Edition 5 ♥ | |
| E0400 Edition 4 |
Root Cache Data (Hint File)
Besides your local information, the nameserver also needs to know where the nameservers for the root domain are. This information must be retrieved from the Internet host ftp.rs.internic.net.
Explaining DNS Database Files
This is a typical DNS zone.domain file for the domain maxx.net. (Its name would be zone.maxx.net. It will translate from a host name to its IP address.)
;
; Addresses for the local domain
maxx.net. IN SOA nova.maxx.net. tyager.nova.maxx.net. (
9602171 ; Serial
36000 ; Refresh every 10 hours
3600 ; Retry after 1 hour
360000 ; Expire after 100 hours
36000 ; Minimum TTL is 10 hours )
; Define name servers
;
maxx.net. IN NS nova.maxx.net.
maxx.net. IN A 204.251.17.241
; Define localhost
;
localhost IN A 127.0.0.1
; Set up hosts
;
maxx IN A 204.251.17.241
IN MX 5 nova.maxx.net.
maxx.net. IN MX 5 nova.maxx.net.
;
; All mail for net delivered to nova
;
;* IN MX 10 nova.maxx.net.
www IN CNAME nova.maxx.net.
ftp IN CNAME nova.maxx.net.
news IN CNAME nova.maxx.net.
mail IN CNAME nova.maxx.net.
ns IN CNAME nova.maxx.net.
loghost IN CNAME nova.maxx.net.
lucy IN A 204.251.17.242
linux IN CNAME lucy.maxx.net.
lucy IN MX 10 lucy.maxx.net.
messdos IN A 204.251.17.243
messdos IN MX 10 messdos.maxx.net.
pentium IN CNAME messdos.maxx.net.
solaris IN A 204.251.17.244
solaris IN MX 10 solaris.maxx.net.
maxx4 IN CNAME solaris.maxx.net.
maxx5 IN A 204.251.17.245
maxx5 IN MX 10 maxx5.maxx.net.
maxx6 IN A 204.251.17.246
maxx6 IN MX 10 maxx6.maxx.net.
Most database file entries are known as DNS resource records. Generally,
the resource records are shown in order: SOA, NS, followed by the
other types, but this ordering isn't required. The data
in each entry may be entered in upper, lower, or mixed case. All
entries in the database file must start at the beginning of the
line. Blank lines as well as any text following a semicolon is ignored.
SOA stands for Start of Authority. This acronym notifies
named that operational parameters follow. The most important
one is the Serial field. Every time you make a change to a database
file, you must increment its serial number. Only by doing this will
secondary servers know they need to reach into your system and pull
out new name server data, a procedure known as a "zone
transfer." Many DNS administrators use a date-time stamp
for this field, like 9602171 for the first version on
February 17, 1996.
First, focus on the SOA section:
maxx.net. IN SOA nova.maxx.net. tyager.maxx.maxx.net.The "maxx.net." field tells named the domain defined by this file. The name server will automatically append it to any host name that appears in the file. The trailing dot is not a type; it keeps named from trying to tack on your domain name. Without it, the resolver would be confused by named's expansion of my domain name to "maxx.net.maxx.net." The IN stands for the "Internet" class of data. Even though other classes exist, they aren't in common usage. The "nova.maxx.net" field is the host on which these database files reside. Finally, "tyager.nova.maxx.net" represents the e-mail address of the DNS administrator, where the first dot (between tyager and nova) would be replaced by the @ symbol to create a valid address. (The @ symbol can't be used here because it has a reserved meaning in DNS database files.)The open parenthesis at the end of the line allows you to split the SOA record across physical lines for readability:
9602171 ; Serial
36000 ; Refresh every 10 hours
3600 ; Retry after 1 hour
360000 ; Expire after 100 hours
36000 ; Minimum TTL is 10 hours )
The "serial" field was discussed earlier.
The remaining four fields specify various time intervals (all
values in seconds) used by the secondary name server:
- Refresh
The time interval that must elapse between each poll of the primary by the secondary name server (here 36,000 seconds or 10 hours). If the "serial number" has been updated on the primary, the secondary assumes its data is stale and requests updated information as a "zone transfer."
- Retry
The time interval used between successive connection attempts by the secondary to reach the primary name server in case the first attempt failed (here 3,600 seconds or one hour). Generally, less than the "refresh" time.
- Expire
The time interval after which the secondary expires its data if it can't reach the primary name server (here 360,000 seconds or 100 hours). The secondary will refuse to service requests after this interval.
- Minimum
The minimum time-to-live value, which specifies how long other servers should cache data from the name server (here 36,000 seconds or 10 hours).
maxx.net. IN NS nova.maxx.net.You must include in this list at least one name server, that is the name of the server specified in the SOA record. You can list multiple name servers for your domain. In fact, your domain should have at least two name servers. Your Internet service provider will probably allow you to use their name server as a secondary for your domain, but it must have the trailing dots!
maxx.net IN A 204.251.17.241The first A record, which resolves a fully-qualified host name to an IP address, is a special one. It defines an IP address for unqualified queries, that is, queries for the host maxx.net. Other A records like this one:
lucy IN A 204.251.17.242provide name-to-address mapping for a specific named host. The domain defined in this file (maxx.net) is appended to the host name you show in the first field. The CNAME records create aliases for existing hosts. These examples illustrate a few common uses:
www IN CNAME maxx.maxx.net. ftp IN CNAME maxx.maxx.net.You can give a host any alias you like, and as many aliases as you want. The host needn't answer to that name, that is, the alias doesn't need to be the host's true name as reported by hostname or uname. The other vital type of record is MX. This tells SMTP e-mail software where to send mail for each named host:
lucy IN MX 10 lucy.maxx.net.When a remote host's mail delivery program sees an e-mail address in your domain, it will query your name server for its applicable MX record or records. Every user on your LAN can receive e-mail, even if not every host is running its own e-mail software. The MX record for lucy, for instance, could easily redirect e-mail to another host on the LAN. The number (10 in this case) in the fourth field represents a preference value. If you define multiple MX records for a host, delivery is attempted to lower-preference value hosts first. The actual value isn't important, only its relationship to other preference values. On larger LANs it's a good idea to create backup e-mail servers. Smaller LANs can simply rely on the fact that most SMTP mailers will retry deliveries to the site for three days before returning a message to its sender. The line, shown commented out here, would arrange to redirect e-mail for all hosts in this domain to a single machine:
; ; All mail for net delivered to nova ; ;* IN MX 10 nova.maxx.net.This is a very good idea for LANs that benefit from a central e-mail repository.
Address-to-Name Mapping
Also called reverse mapping, the zone.ADDR db file allows resolvers to post queries armed with only the IP address of a host. This reverse mapping is used, for example, by Internet server software that prefers to log host names rather than less informative IP addresses. Address-to-name mapping data will be provided for a DNS server by PTR entries in its zone.ADDR files, one for every network served by this DNS server, and its zone.LOCAL file. Each entry will indicate the IP address in reverse order, then the host name. For example, for host littledog.maxx.net, whose IP address is 204.251.17.249, in the zone.ADDR file it's PTR entry would look like:249.17.251.204. IN PTR littledog.maxx.net.Why is it backwards? Recall that DNS does its parsing from right to left, from most inclusive to most specific. For IP addresses, it needs to parse in the same direction. But IP addresses, from right to left, go from most specific to most inclusive. So the simple answer is to reverse the IP address in the NDS PTR records. Now DNS can parse in the same direction, and resolve in the same order — from most inclusive to most specific. A shortcut in PTR records is often used. It looks like this:
249 IN PTR littledog.maxx.net.If the dot is left off the IP address in the PTR record, DNS will complete the IP address with the IP address of the domain, specified in the file's SOA record. This is also true for A records in name-to-address mapping db files. If the dot is left off, DNS will automatically try to complete the name with the full domain name in this zone. Paying attention to the terminating dot is important. For the zone.LOCAL file we describe the loopback address just as you would expect it, now that we know we have to reverse it. The PTR entry in the zone.LOCAL file would look like:
1.0.0.127. IN PTR localhost.
or, using the shortcut:
1 IN PTR localhost.
Only one line from named.conf remains to be discussed, the "cache"
entry. This is a bit of a misnomer as it doesn't have anything
to do with local caching. Instead, it defines the master root domain
name servers for the Internet. You can retrieve this list from
ftp://nic.ddn.mil/netinfo/root-servers.txt. You will need to check
this site periodically to ensure you have the latest list.
This file lists the root domain servers in human-readable format. You'll need
to reformat it for consumption by named. Here's what the cache file
looks like:
; Servers from the root domain ; ftp://nic.ddn.mil/netinfo/root-servers.txt ; . 99999999 IN NS A.ROOT-SERVERS.NET . 99999999 IN NS B.ROOT-SERVERS.NET . 99999999 IN NS C.ROOT-SERVERS.NET . 99999999 IN NS D.ROOT-SERVERS.NET . 99999999 IN NS E.ROOT-SERVERS.NET . 99999999 IN NS F.ROOT-SERVERS.NET . 99999999 IN NS G.ROOT-SERVERS.NET . 99999999 IN NS H.ROOT-SERVERS.NET . 99999999 IN NS I.ROOT-SERVERS.NET ; Root servers by address A.ROOT-SERVERS.NET 99999999 IN A 198.41.0.4 B.ROOT-SERVERS.NET 99999999 IN A 128.9.0.107 C.ROOT-SERVERS.NET 99999999 IN A 192.33.4.12 D.ROOT-SERVERS.NET 99999999 IN A 128.8.10.90 E.ROOT-SERVERS.NET 99999999 IN A 192.203.230.10 F.ROOT-SERVERS.NET 99999999 IN A 192.5.5.241 G.ROOT-SERVERS.NET 99999999 IN A 192.112.36.4 H.ROOT-SERVERS.NET 99999999 IN A 128.63.2.53 I.ROOT-SERVERS.NET 99999999 IN A 192.36.148.17Here, the dot (.) refers to the root domain and the 99999999 means a very long time-to-live value. The TTL value is no longer used for caching because the data isn't discarded if it times out, but administrators generally keep it around because it does no harm. Your site may not have access to the Internet or may have protected its connection via a firewall. Often in this type of DNS configuration, one or more machines will be designated as a root server. In this case, the cache file will contain a list of internal root servers, and not the official Internet master root domain servers.
Testing Your Name Server
Perform simple checks on your name server's health with nslookup. This utility is standard with every TCP/IP-network-aware version of UNIX. There are other similar tools available — see "List of Utilities" later in this section for details. You can find the source code for dig at several anonymous FTP archive sites, including: ftp://ftp.wonderland.org/NetBSD/NetBSD-current/src/usr.sbin/named/dig/ for the NetBSD release. Use Archie to find other sites. The nslookup utility can be used interactively, much like other programs, such as ftp. That is, if you invoke this program without command line arguments, it displays a prompt and waits for your command:>server mpe3000 Default Name Server: mpe3000.cup.hp.com Address: 15.13.199.80By default, nslookup performs queries based on host names you submit; just enter a host name after the prompt:
> romeo Server: mpe3000.cup.hp.com Address: 15.13.199.80 Name: romeo.cup.hp.com Address: 15.13.194.242 > 15.12.194.242 Server: mpe3000.cup.hp.com Address: 15.13.199.80 Name: romeo.cup.hp.com Address: 15.12.194.242You can check the resource records information about name server:
> set type=ns > mpeworld Name Server: mpeworld.cup.hp.com Address: 15.13.199.80 origin = dns.cup.hp.com mail addr = dns-admin.dns.cup.hp.com serial = 96092255 refresh = 10800 (3 hours) retry = 3600 (1 hour) expire = 604800 (7 days) minimum ttl = 86400 (1 day)
|
Server Configuration File named.conf |
How to Run The DNS Server |