|
|
Reads all data from the current configuration record.
Syntax
READALLCONF [;FORMAT]
Parameters
- FORMAT
Designates output formatting. Output is formatted in a
WRITECONF format so that it can be re-entered into NMMGR's
maintenance mode. If the format option is omitted, data will be formatted
with one field per line when writing to a file.
Description
READALLCONF reads and displays all the fields in the configuration record
identified by the current path. If the current path is associated with a
multipaged data screen, then all the pages of data associated with the screen
are displayed, unless PAGECONF was used to set the current page.
Output is directed to the file defined in the file equation FORMLIST.
If FORMLIST is not defined, output is sent to $STDLIST.
You must enter the CARDCONF, then the PATHCONF command before
using the READALLCONF command. This defines the pathname of the record
from which the data will be read. If you want READALLCONF to display
the data written in the previous WRITECONF commands, you must first
enter the UPDATECONF command.
If you are referencing a DTC card screen, you must use the CARDCONF
command to set the current card number before issuing the READALLCONF
command.
Example
To display all the fields in the NETXPORT.NI.GLOBAL screen:
NMMGR> PATHCONF NETXPORT.GLOBAL
(Sets the path to the screen.)
NMMGR> READALLCONF
Displays all the fields in the screen.)
NMMGR> PATHCONF NETXPORT.GLOBAL
(Sets the path to the screen.)
NMMGR> READALLCONF;FORMAT
(Displays all the fields in the screen.)
PATHCONF NETXPORT.GLOBAL
WRITECONF HOMENET, "NETNAME"
WRITECONF F, "2"
WRITECONF G, "3"
WRITECONF H, "1"
WRITECONF INBUF, "256"
UPDATECONF
NMMGR
|