HPlogo Using the Node Management Services (NMS) Utilities > Chapter 5 Using NMMGR in Maintenance Mode

CARDCONF

MPE documents

Complete PDF
Table of Contents
Index

Sets the current DTC card number so that the correct card is displayed or updated by the READALLCONF, READCONF, UPDATECONF, and WRITECONF commands.

Syntax


  CARDCONF cardno

Parameters

cardno

A number corresponding to the slot number of the DTC that contains the DTC card to be acted on. The number must be between 0 and 5.

Description

CARDCONF sets the current card number for a path referencing a DTC card screen. If the current path identifies a DTC configuration, the commands READALLCONF, READCONF, UPDATECONF, and WRITECONF operate on data associated with a specific card in the DTC, as identified by the CARDCONF command.

The CARDCONF command must be specified before a PATHCONF command for a DTC card screen.

Example


  NMMGR> CARDCONF 1
(Sets the current DTC card number to 1.) 

  NMMGR> PATHCONF DTS.DTCPC.SELECT.DTC01.CARD012
(Sets the current path to the data screen that contains data for cards 0, 1, and 2 of DTC01.)



ADDVC

COMPRESSCONF