|
|
This marking is evidence of compliance with the EU Radio Equipment and
Telecommunications Terminal Equipment Directive 1999/5/EC and other
applicable EU Directives. This product conforms to ETSI TBR 1,2 for
RS-232 and V.35 interfaces.
The Z7340A operates at SELV (Safety Extra Low Voltage) and,
to assure safe and compliant operation, may connect to the telecommunication
network only through an approved isolating device. The product is
designed for use only with HP e3000 servers. Use with any other system may
result in a hazard and thus invalidate regulatory approvals/conformance.
DECLARATION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 |
Manufacturer's name: |
Hewlett-Packard Company |
Manufacturer's address: |
19420 Homestead Road Cupertino, California 95014, USA |
declares that the product: |
| Product Name: |
PCI 8-Port ACC (Advanced Communications Controller) |
| Model Number(s): | Z7340A |
| Product Options: |
PCI 8-Port Serial Card: Z7340A (HP P/N Z7340-68001)
Interchange Panels: Z7321A, Z7322A Cables: Z7325A, Z7326A, Z7327A |
conforms to the following Product Specifications: |
| Safety: | IEC950:1991+ A1, A2, A3, A4
/ EN 60950:1992 + A1,A2,A3,A4, A11 GB 4943-1995 |
| EMC: | CISPR 22:1993+A1,
A2 / EN 55022:1994+A1, A2 Class A1 GB 9254-1988 CISPR 24:1997 /
EN 55024:1998: ITE Immunity |
| Telecom: | ETSI TBR 1,2 |
Supplementary Information: |
The product herewith complies with the requirements of the
Low Voltage Directive 73/23/EEC, the EMC Directive 89/336/EEC, and the
R&TTE Directive 1999/5/EC (Annex II) and carries the CE-marking
accordingly. |
1) | The Product was tested in a typical
configuration with Hewlett-Packard information technology equipment. |
| Cupertino, CA, USA, April 8, 2000 |
Office of the Quality Manager |
| European Contact for regulatory topics only:
Hewlett-Packard GmbH, Department HQ-TRE, Herrenberger Straße 130, D-71034
Böblingen (FAX: + 49-7031-14-3143) |
|