|
|
- 1
- MESSAGE
An invalid resource was specified. (THMGRERR 1)
- CAUSE
The resource name specified is not recognized as a
valid resource.
- ACTION
Check the spelling of the resource specified or execute a
SHOW command to get a list of the resources recognized by
this utility.
- 2
- MESSAGE
Invalid control option or name was specified.
(THMGRERR 2)
- CAUSE
The control value parameter is not a valid control
option or a recognizable control name.
- ACTION
Check the value of the option specified.
- 3
- MESSAGE
Threshold Manager function is invalid. (THMGRERR 3)
- CAUSE
The function passed to THMGRRES.PUB.SYS is invalid.
- ACTION
Restore a backup copy of the THMGRRES.PUB.SYS file.
- 4
- MESSAGE
Threshold Manager control procedure invalid.
(THMGRERR 4)
- CAUSE
The control passed to THMGRCTL.PUB.SYS is invalid.
- ACTION
Restore a backup copy of the THMGRCTL.PUB.SYS file.
- 5
- MESSAGE
Resource name does not match an internal table resource.
(THMGRERR 5)
- CAUSE
Internal error. It is possible that the file THMGRRES.PUB.SYS
has become corrupted.
- ACTION
Restore a backup copy of the THMGRRES.PUB.SYS file.
- 6
- MESSAGE
Control option does not match an internal table control.
(THMGRERR 6)
- CAUSE
Internal error. It is possible that the file THMGRCTL.PUB.SYS
has become corrupted.
- ACTION
Restore a backup copy of the THMGRCTL.PUB.SYS file.
- 7
- MESSAGE
Information provided with resource does not match.
(THMGRERR 7)
- CAUSE
Internal error. It is possible that the file THMGRRES.PUB.SYS
has become corrupted.
- ACTION
Restore a backup copy of the THMGRRES.PUB.SYS file.
- 8
- MESSAGE
Control information does not match resource.
(THMGRERR 8)
- CAUSE
Internal error. It is possible that the file THMGRCTL.PUB.SYS
has become corrupted.
- ACTION
Restore a backup copy of the THMGRCTL.PUB.SYS file
- 9
- MESSAGE
Communication error with Threshold Manager.
(THMGRERR 9)
- CAUSE
A communication error occurred with the Threshold Manager.
- ACTION
Exit the program and restart the application.
- 10
- MESSAGE
Duplicate threshold information. (THMGRERR 10)
- CAUSE
The threshold value specified is already part of
the current configuration for this resource.
- ACTION
Check the current configuration for this resource,
and enter the correct threshold value.
- 11
- MESSAGE
The number of thresholds is at maximum capacity.
(THMGRERR 11)
- CAUSE
Internal error. The table which holds the thresholds
is at maximum capacity.
- ACTION
Delete the unnecessary thresholds and try again.
- 12
- MESSAGE
Threshold does not exist. (THMGRERR 12)
- CAUSE
The threshold value supplied for this resource is
non-existent.
- ACTION
Check the current configuration of this resource by using the
SHOW command and enter the correct threshold value.
- 13
- MESSAGE
Threshold Manager encountered an unknown error.
(THMGRERR13)
- CAUSE
A trap has been detected from another external procedure.
- ACTION
None
- 14
- MESSAGE
Creation of the Threshold Manager process failed.
(THMGRERR 14)
- CAUSE
Creation of the Threshold Manager process failed
during the program initialization.
- ACTION
Exit the program and restart the application.
- 16
- MESSAGE
Threshold Manager process is not active.
(THMGRERR 16)
- CAUSE
The Threshold Manager process failed during program
initialization.
- ACTION
Exit the program and restart the application.
- 17
- MESSAGE
The new control option is invalid. (THMGRERR 17)
- CAUSE
Internal error. It is possible that the file
THMGRCTL.PUB.SYS has become corrupted.
- ACTION
Restore a backup copy of the THMGRCTL.PUB.SYS file.
- 18
- MESSAGE
Invalid threshold value was specified.
(THMGRERR 18)
- CAUSE
The threshold value provided with this resource
does not match the previously configured threshold value.
- ACTION
Check the current configuration of this resource by using the
SHOW command and enter the correct threshold value.
- 19
- MESSAGE
Invalid frequency was specified. (THMGRERR 19)
- CAUSE
The time interval specified is not valid.
- ACTION
Enter the command again with a valid time interval between
25 and 3600 seconds.
- 52
- MESSAGE
Request for enabling a resource has been denied.
(THMGRERR 52)
- CAUSE
The resource information on internal tables was found to be
incomplete or inconsistent. There could be data corruption.
- ACTION
Delete all the thresholds for this resource and reconfigure.
- 53
- MESSAGE
Threshold Manager process is dead. (THMGRERR 53)
- CAUSE
The Threshold Manager process aborted for some unknown
reason.
- ACTION
Exit the program and restart the application.
- 101
- MESSAGE
Bad procedure label encountered while monitoring the usage-level
of resource "!". (THMGRERR 101)
- CAUSE
Threshold Manager internal error. Note that the resource name may
not be the same in all occurrances of this error.
- ACTION
Disable Threshold Manager and restart.
- 102
- MESSAGE
Bad procedure label encountered while executing the jumpoff
procedure for control. (THMGRERR 102)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 103
- MESSAGE
Bad procedure label encountered while executing the fallback
procedure for control. (THMGRERR 103)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 104
- MESSAGE
Failed while sending a message to port!.
(THMGRERR 104)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 105
- MESSAGE
Failed while receiving a message from port !.
(THMGRERR 105)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 106
- MESSAGE
Failed to create port !. (THMGRERR 106)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 107
- MESSAGE
Encountered a trap. (THMGRERR 107)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 108
- MESSAGE
Encountered error during dynamic call of the usage-monitoring
procedure for resource. (THMGRERR 108)
- CAUSE
Threshold Manager internal error occurred during
a dynamic call to a procedure.
- ACTION
Disable Threshold Manager and restart.
- 109
- MESSAGE
Encountered error during dynamic call of the jump off
procedure for control. (THMGRERR 109)
- CAUSE
Threshold Manager internal error occurred during
a dynamic call to a procedure.
- ACTION
Disable Threshold Manager and restart.
- 110
- MESSAGE
Encountered error during dynamic call of the fall back procedure
for control. (THMGRERR 110)
- CAUSE
Threshold Manager internal error occurred during
a dynamic call to a procedure.
- ACTION
Disable Threshold Manager and restart.
- 111
- MESSAGE
My adoption by progen failed. (THMGRERR 111)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 112
- MESSAGE
Initialization of internal tables failed.
(THMGRERR 112)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 113
- MESSAGE
Encountered bad jumpoff count for control "!".
(THMGRERR 113)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 118
- MESSAGE
Invalid table header or not a table header corresponding to
resource "!". (THMGRERR 118)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 119
- MESSAGE
Unauthorized attempt to create the manager.
(THMGRERR 119)
- CAUSE
Threshold Manager internal error.
- ACTION
Disable Threshold Manager and restart.
- 201
- MESSAGE
The resource name specified is not valid.
(THMGRERR 201)
- CAUSE
The resource name is not one of the resource names recognized
by this utility.
- ACTION
Enter a resource name recognized by this utility. To see a list of
valid resource names use the SHOW command.
- 202
- MESSAGE
No additional THRESHOLDS may be set for this resource.
(THMGRERR 202)
- CAUSE
An attempt was made to add more than the allowable number
of threshold values to a particular resource.
- ACTION
Either modify one of the existing thresholds or
delete it and add a new threshold for this resource.
- 203
- MESSAGE
Non-existent threshold value for a valid resource.
(THMGRERR 203)
- CAUSE
A non-existent threshold value was specified for
a valid resource.
- ACTION
Enter the correct threshold value for this resource. Use the
SHOW command to see what the current values are for any
resource.
- 204
- MESSAGE
The threshold value should be between 1 and 100.
(THMGRERR 204)
- CAUSE
A threshold value greater than 100 or less than
1 was entered.
- ACTION
Enter a threshold value between 1 and 100.
- 207
- MESSAGE
Threshold Manager must be ENABLED for this command.
(THMGRERR 207)
- CAUSE
An attempt was made to execute a command that requires the
Threshold Manager process to be enabled.
- ACTION
Enable the Threshold Manager using the ENABLEMANAGER
command.
- 208
- MESSAGE
An invalid control option was specified.
(THMGRERR 208)
- CAUSE
An invalid control option value was specified with
this command.
- ACTION
Enter the command again with a valid control value.
- 209
- MESSAGE
An invalid notification option was specified.
(THMGRERR 209)
- CAUSE
An invalid value for a notification option was entered.
- ACTION
Enter the command again with a valid notification value.
- 212
- MESSAGE
Cannot enter duplicate threshold values for a resource.
(THMGRERR 212)
- CAUSE
The threshold value entered is the same as a currently configured
threshold for this resource.
- ACTION
Check to make sure the resource is correct, then either modify the
current value or delete it and add it again.
- 300
- MESSAGE
Subsys !, Info: ! (THMGRERR 300)
- CAUSE
Unexpected error occurred, subsystem and subsystem error
displayed.
- ACTION
None. HP internal support required to rectify this problem.
- 302
- MESSAGE
Parameter is missing. (THMGRERR 302)
- CAUSE
An input parameter to the command is missing.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 303
- MESSAGE
Parameter length is invalid. (THMGRERR 303)
- CAUSE
The input parameter size exceeds the size allowed for
this parameter.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 303
- MESSAGE
Parameter composition is invalid. (THMGRERR 304)
- CAUSE
The input parameter is not correct.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 305
- MESSAGE
Parameter is invalid. (THMGRERR 305)
- CAUSE
The input parameter type is not correct. A numeric
input parameter can only be accepted for numeric arguments, and
a string parameter for string arguments.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 307
- MESSAGE
Info is invalid. (THMGRERR 307)
- CAUSE
The information passed to this program via the ";INFO=" parm
in the RUN command is invalid.
- 309
- MESSAGE
Failed to open the message catalog. (THMGRERR 309)
- CAUSE
Unable to open, or possibly find the catalog associated with
this utility.
- ACTION
Restore the message catalog (TMCATnnn, where nnn
is the native language ID number of the machine)
from backup tapes and continue.
- 310
- MESSAGE
Invalid character. (THMGRERR 310)
- CAUSE
Invalid character detected in the command line.
- ACTION
Enter command again.
- 315
- MESSAGE
Parameter length overflow. (THMGRERR 315)
- CAUSE
The input parameter size exceeds the size allowed
for this parameter.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 321
- MESSAGE
Invalid REDO command. (THMGRERR 321)
- CAUSE
Cannot find the command to redo, it is either invalid or has been
pushed off the top of the stack and is no longer accessible.
- ACTION
Enter the command again.
- 324
- MESSAGE
Cannot recognize the command passed to HELP.
(THMGRERR 324)
- CAUSE
Cannot find the command to provide help.
- ACTION
Use the HELP summary to identify which command it should be
and enter the command again. The HELP summary is accessed by
issuing the command HELP without arguments.
- 328
- MESSAGE
*Error: Out of Heap space. (THMGRERR 328)
- CAUSE
Cannot get the additional space necessary to execute.
- ACTION
Run the program again specifying a larger
NMHEAP size.
- 330
- MESSAGE
Security violation. (THMGRERR 330)
- CAUSE
The user does not have the privilege level necessary
to execute this command.
- ACTION
Obtain the necessary privilege level and try again.
- 331
- MESSAGE
Failed to open exclusively. (THMGRERR 331)
- CAUSE
This program is being accessed by someone else at
this time.
- ACTION
Wait until the program is available for exclusive access.
- 333
- MESSAGE
Cannot deallocate space. (THMGRERR 333)
- CAUSE
An internal error occurred which will not allow
the program to deallocate space.
- ACTION
Try the command again.
- 334
- MESSAGE
Failed to get the run parameter. (THMGRERR 334)
- CAUSE
The program failed on access of the ";PARM=" argument
of the RUN command.
- ACTION
Try the command again. Use the CI HELP facility for the
RUN command.
- 335
- MESSAGE
HPMYPROGAM failed. (THMGRERR 335)
- CAUSE
The program call to HPMYPROGRAM intrinsic to get the
program's name failed.
- ACTION
Exit the program and try again.
- 336
- MESSAGE
Trying to open the program a second time.
(THMGRERR 336)
- CAUSE
More than one access to the program is not allowed.
- ACTION
Wait until the program is available for exclusive access.
- 337
- MESSAGE
Only one user is allowed to configure thresholds.
(THMGRERR 337)
- CAUSE
Exclusive access to the configuration data is required.
- ACTION
Wait until the program is available for exclusive access.
- 338
- MESSAGE
Threshold Manager must be enabled. (THMGRERR 338)
- CAUSE
This command requires Threshold Manager to be enabled.
- ACTION
Execute the command ENABLEMANAGER and try the
command again.
- 401
- MESSAGE
Incomplete command pending on end-of-file.
(THMGRERR 401)
- CAUSE
The program has encountered EOF on the redirected
output file.
- ACTION
Create a larger output file and execute command again.
- 402
- MESSAGE
Unable to process the command. (THMGRERR 402)
- CAUSE
An error occurred while attempting to process a command.
- ACTION
Enter the command again.
- 403
- MESSAGE
Invalid parameter length. (THMGRERR 403)
- CAUSE
The input parameter size exceeds the size allowed
for this parameter.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 404
- MESSAGE
Command history stack is empty. (THMGRERR 404)
- CAUSE
An attempt was made to use the REDO facility when
no other commands have executed.
- ACTION
Enter the command directly.
- 405
- MESSAGE
Command not found in command history stack.
(THMGRERR )
- CAUSE
The requested command was not found in the command history
stack.
- ACTION
Enter the command directly.
- 406
- MESSAGE
Invalid parameter length or composition.
(THMGRERR 406)
- CAUSE
An error was detected in the argument provided,
either the length is invalid or it is the wrong type.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 407
- MESSAGE
Unrecognized command. (THMGRERR 407)
- CAUSE
The command entered is not a valid command.
- ACTION
Use the HELP summary to identify which command it should
be, and enter the command again. The HELP summary is accessed
by issuing the command HELP without any arguments.
- 409
- MESSAGE
This command has no associated functionality.
(THMGRERR 409)
- CAUSE
An invalid command was entered.
- ACTION
None.
- 410
- MESSAGE
Error in accessing the message catalog.
(THMGRERR 410)
- CAUSE
An error occurred accessing the message catalog
for a particular message.
- ACTION
Restore the message catalog (TMCATnnn, where nnn
is the native language ID number of the machine)
from backup tapes and continue.
- 411
- MESSAGE
Invalid numeric index into command history stack.
(THMGRERR 411)
- CAUSE
The numeric argument provided with the REDO command points
to an entry that does not exist
or that has been pushed off the top of the stack.
- ACTION
Enter the command directly.
- 412
- MESSAGE
Command name length exceeds 16 characters.
(THMGRERR 412)
- CAUSE
A command was entered which exceeded the allowable length
for a command.
- ACTION
Enter the command again and insert spaces between
the comand and the arguments.
- 413
- MESSAGE
Insufficient capabilities to execute this command.
(THMGRERR 413)
- CAUSE
The user does not have the required privilege level
to execute this command.
- ACTION
Obtain the privilege level required to execute this command
and try again.
- 414
- MESSAGE
A required parameter was not specified in command.
(THMGRERR 414)
- CAUSE
A required parameter is missing from the command input.
- ACTION
Use the HELP facility for this command or use the manual
and enter the command again.
- 415
- MESSAGE
This parameter can consist of numeric characters only.
(THMGRERR 415)
- CAUSE
A non-numeric character was entered for a numeric value.
- ACTION
Enter the command again with a valid numeric value.
- 416
- MESSAGE
Depth of command stack can only be in the range 1 to 100.
(THMGRERR 416)
- CAUSE
An attempt was made to create a history stack greater than
100 or less than 1.
- ACTION
None.
- 417
- MESSAGE
Invalid key specified with REDO command.
(THMGRERR 417)
- CAUSE
An invalid key was entered during a REDO
of a previous command.
- ACTION
Enter the command again.
- 418
- MESSAGE
Command only valid in interactive mode.
(THMGRERR 418)
- CAUSE
A command was entered in a job, but it can only
be executed during an interactive session.
- ACTION
Execute the command after logging on interactively.
- 420
- MESSAGE
Invalid command edit operation. (THMGRERR 420)
- CAUSE
There was an invalid input while editing a command
from the REDO history stack.
- ACTION
Edit the command again.
- 501
- MESSAGE
Unexpected error returned from FFILEINFO intrinsic.
(THMGRERR 501)
- CAUSE
An internal error occurred while attempting to get information
on a file.
- ACTION
Check the file system errors and correct the error.
Enter the command again.
- 502
- MESSAGE
Unable to close the INPUT file. (THMGRERR 502)
- CAUSE
An error occurred during the FCLOSE
of the input file.
- ACTION
Check the file system errors and correct the error.
Try the command again.
- 503
- MESSAGE
Unable to close the OUTPUT file. (THMGRERR 503)
- CAUSE
An error occurred during the FCLOSE of the
output file.
- ACTION
Check the file system errors and correct the error.
Try the command again.
- 504
- MESSAGE
Unexpected error occurred during INPUT file I/O.
(THMGRERR 504)
- CAUSE
An error occurred during access of the input file.
- ACTION
Check the file system errors and correct the error.
Try the command again.
- 505
- MESSAGE
Unexpected error occurred during OUTPUT file I/O.
(THMGRERR 505)
- CAUSE
An error occurred during output of the output file.
- ACTION
Check the file system errors and correct the error.
Try the command again.
- 506
- MESSAGE
Unexpected error occurred during $STDIN input operation.
(THMGRERR 506)
- CAUSE
An error occurred accessing the $STDIN
system file.
- ACTION
Check the file system errors and correct the error.
Try the command again.
- 507
- MESSAGE
Unexpected error occurred during the $STDLIST output.
(THMGRERR 507)
- CAUSE
An error occurred accessing the $STDLIST
system file.
- ACTION
Check the file system errors and correct the error.
Try the command again.
- 508
- MESSAGE
Unexpected error from FCONTROL intrinsic with INPUT file.
(THMGRERR 508)
- CAUSE
An error occurred accessing the input file using
the FCONTROL intrinsic.
- ACTION
Check the file system errors and correct the error.
Try the command again.
- 509
- MESSAGE
Unexpected error from FGETINFO intrinsic.
(THMGRERR 509)
- CAUSE
An error occurred with the FGETINFO intrinsic during
file access.
- ACTION
Check the file system errors and correct the error.
Try the command again.
- 510
- MESSAGE
File type is not ASCII. (THMGRERR 510)
- CAUSE
Either the input file or the output file is not
an ASCII file.
- ACTION
Make sure that the offending file is an
ASCII file.
- 511
- MESSAGE
Invalid file record size. (THMGRERR 511)
- CAUSE
Either the input file or the output file record
size is not valid.
- ACTION
Make sure the file record size is 256 characters or less.
- 512
- MESSAGE
Unexpected error from the PRINTOPREPLY intrinsic.
(THMGRERR 512)
- CAUSE
An error occurred attempting to notify the console operator
of some event.
- ACTION
Enter the command again.
- 513
- MESSAGE
End-of-file encountered on OUTPUT file.
(THMGRERR 513)
- CAUSE
Encountered end of file condition on the output
file during the execution of a command.
- ACTION
Increase the size of the output file.
- 514
- MESSAGE
End-of-file encountered on INPUT file.
(THMGRERR 514)
- CAUSE
Encountered end of file condition on the input file
during the execution of a command.
- ACTION
Increase the size of the input file.
- 515
- MESSAGE
End-of-file encountered on $STDLIST. (THMGRERR 515)
- CAUSE
Encountered end of file condition on the
$STDLIST during the execution of a command.
- ACTION
Exit the program and start the application again. Recreate the
output file with a greater number of records and try again.
- 516
- MESSAGE
Unexpected error from FPOINT intrinsic.
(THMGRERR 516)
- CAUSE
Access of a file via the FPOINT intrinsic resulted in
an error.
- ACTION
Check the file system errors and correct the error.
Try the command again.
- 800
- MESSAGE
Threshold Manager process has already been created.
(THMGRWARN 800)
- CAUSE
An attempt was made to create the Threshold Manager process
when it was already active.
- ACTION
The Threshold Manager is already active and no further action
is required.
- 900
- MESSAGE
Resource is already in the ENABLED state.
(THMGRWARN 900 )
- CAUSE
An attempt was made to enable a resource when it
has already been enabled.
- ACTION
This resource is currently enabled, no further action
is required.
- 901
- MESSAGE
Resource is already in the DISABLED state.
(THMGRWARN 901 )
- CAUSE
An attempt was made to disable a resource after
it has already been disabled.
- ACTION
This resource is currently disabled, no further
action is required.
- 902
- MESSAGE
Global notification has already been ENABLED.
(THMGRWARN 902)
- CAUSE
An attempt was made to enable Global Notification
while the notification flag was already enabled.
- ACTION
Since Global Notification is already enabled, no
further action is required.
- 903
- MESSAGE
Global notification has already been DISABLED.
(THMGRWARN 903)
- CAUSE
An attempt was made to disable global notifications
while the notification flag is already disabled.
- ACTION
Since Global Notification is already disabled, no
further action is required.
- 904
- MESSAGE
Threshold Manager has already been ENABLED.
(THMGRWARN 904)
- CAUSE
An attempt was made to enable Threshold Manager
after it was already enabled.
- ACTION
The Threshold Manager process is currently enabled,
no further action is required.
- 905
- MESSAGE
Threshold Manager has already been DISABLED.
(THMGRWARN 905)
- CAUSE
An attempt was made to disable Threshold Manager
after it was already disabled.
- ACTION
The Threshold Manager Process is currently disabled,
no further action is required.
|