- Error Code
Description
- 0
Successful or end-of-file (EOF)
- 1
Illegal DB register setting
- 2
Illegal capability
- 3
Required parameter missing
- 4
Disk space allocation disabled on all domain disks
- 5
DRT number >511
- 6
Device has no spare blocks available
- 7
Unformatted or uninitialized media on device
- 8
Illegal parameter value
- 9
Invalid file type specified in foption
- 10
Invalid record size specification
- 11
Invalid resultant block size
- 12
Record number out of range
- 13
Cannot open file multiaccess
- 15
Exceeded maximum file opens for write access
- 16
More than 255 opens of a file
- 17
Magnetic tape runaway
- 18
Device powered up
- 19
Forms control was reset
- 20
Invalid operation requested (for example, terminal type set to
-24 which is an invalid entry)
- 21
Data parity error
- 22
Timeout (read timeout value set with FCONTROL
itemnum=4)
- 23
End-of-tape
- 24
Device not ready; not online, modem dsr signal not "high", or line
disconnected)
- 25
No write ring on tape
- 26
Transmission error
- 27
I/O timeout; block mode read timer expired (timer
set by system, not user changeable)
- 28
Timing error; data arrived at controller faster
than it could be serviced (data overrun)
- 29
Start I/O (SIO) failure
- 30
Unit failure
- 31
End-of-line (EOL) special character terminator or additional
end-of-record (AEOR) character (defined by FCONTROL
itemnum=25)
- 32
Software abort of I/O operation (for example, an ABORTIO
command was entered)
- 33
Data lost or no buffer available
- 34
Unit not online
- 35
Data set not ready
- 36
Invalid disk address
- 37
Invalid memory address
- 38
Tape parity error
- 39
Recovered tape error
- 40
Operation inconsistent with access type
- 41
Operation inconsistent with record type
- 42
Operation inconsistent with device type (for example, attempted to set
an invalid line speed through FCONTROL
itemnum=11)
- 43
Write exceeds record size
- 44
Update at record zero
- 45
Privileged file violation
- 46
Out of disk space
- 47
I/O error on a file label
- 48
Invalid operation; multiple file access
- 49
Unimplemented function
- 50
Nonexistent account
- 51
Nonexistent group
- 52
Nonexistent permanent file
- 53
Nonexistent temporary file
- 54
Invalid file reference
- 55
Device unavailable
- 56
Invalid device specification
- 57
Out of virtual memory
- 58
No file passed
- 59
Standard label violation
- 60
Global RIN not available or insufficient system resources
- 61
Out of group disk space
- 62
Out of account disk space
- 63
No nonshareable device capability
- 64
Program not prepared with multiple RIN capability
- 66
Plotter limit switch reached
- 68
Insufficient system resources
- 69
I/O error
- 70
I/O error while printing header/trailer, or an FOPEN or
FCLOSE failed
- 71
Too many files open
- 72
Invalid file number
- 73
Bounds violation
- 74
No room in stack for file entry
- 77
Nowait I/O operation pending
- 78
No nowait I/O pending for any file
- 79
No nowait I/O pending for any special file
- 80
Spoolfile size exceeds configuration
- 81
No spool class defined in system
- 82
Insufficient space in spool class for I/O request
- 83
I/O error on spoolfile
- 84
Device unavailable for spoolfile
- 85
Operation inconsistent with spooling (for example,
attempt to read hardware status)
- 86
Spooling internal error
- 87
Bad spoolfile block
- 88
Nonexistent spoolfile
- 89
Power failure
- 90
Exclusive violation; file being accessed
- 91
Exclusive violation; file accessed exclusively
- 92
Lockword violation
- 93
Security violation
- 94
User not creator
- 95
Read not completed; the terminal user pressed BREAK (The user
must enter the RESUME command to continue. The file system sees
the restart, the application does not.)
- 96
Disk I/O error
- 97
No control-Y PIN
- 98
Read timer overflow; read exceeded maximum capacity of read timer
(655.35 seconds)
- 99
BOT and backspace tape
- 100
Duplicate permanent file name
- 101
Duplicate temporary file name
- 102
I/O error on directory
- 103
Permanent directory overflow
- 104
Temporary directory overflow
- 105
Bad variable block structure
- 106
Extent size exceeds maximum
- 107
Insufficient space for user labels
- 108
Invalid file label
- 109
Invalid carriage control
- 110
Attempt to save permanent file as temporary
- 111
No save files (SF) capability
- 112
No mountable volumes (UV) capability
- 113
Volume set not mounted; mount problem
- 114
Volume set not dismounted; dismount problem
- 115
Attempted rename across volume sets rejected
- 116
Invalid tape label FOPEN/HPFOPEN parameters
- 117
Attempted write on an unexpired tape file
- 118
Invalid header or trailer tape label
- 119
I/O error positioning tape for tape labels
- 120
Attempted write on an IBM standard tape label
- 121
Tape label lockword violation
- 122
Tape label table overflow
- 123
End of tape volume set
- 124
Attempt to append labeled tape
- 125
Expiration date later than preceding file
- 126
Character set number must be between 0 and 31
- 127
Form number must be between 0 and 31
- 128
Logical page number must be between 0 and 31
- 129
Vertical format number must be between 0 and 31
- 130
Number of copies must be between 1 and 32,767
- 131
Number of overlays must be between 1 and 8
- 132
Page length parameter must be between 12 (=3) and 68 (=17)
- 133
Picture number must be between 0 and 31
- 134
Extended capability parameter must be 0 (OFF) or 1 (ON)
- 137
Defective track on foreign disk
- 138
Track does not exist on foreign disk
- 139
Deleted record on IBM diskette
- 148
Inactive RIO record
- 149
Missing item number or return variable
- 150
Invalid itemnum
- 151
Undefined file type
- 152
Unrecognized option in FOPEN/HPFOPEN
device parameter
- 153
Expecting semicolon (;) or carriage return in
FOPEN/HPFOPEN device parameter
- 154
Environment file open error
- 155
File not environment file; check file code or record size
- 156
Header record incorrect
- 157
Uncompiled environment file
- 158
Error reading environment file
- 159
Error closing environment file
- 160
Error doing FDEVICECONTROL from environment file
- 161
Too many parameters in device string overflow
- 162
Expecting "=" after option in device parameter
- 163
Incorrect ENV backreference in file equation
- 164
Device parameter too large or missing carriage
return
- 165
Invalid density specification
- 166
FFILEINFO failed while accessing remote spoolfile
- 167
Spoolfile label error; cannot insert environment file name
- 168
Item not supported on remote system
- 170
Record marked deleted; pointer positioned to a record marked for
deletion
- 171
(KSAM) Duplicate key value not allowed
- 172
(KSAM) Key not found; invalid key value
- 173
(KSAM) tcount parameter larger than record
size
- 174
(KSAM) Cannot get extra data segment
- 175
(KSAM) Internal KSAM error
- 176
(KSAM) Illegal extra data segment
- 177
(KSAM) Too many extra data segments for this process
- 178
(KSAM) Not enough virtual memory for extra data segment
- 179
(KSAM) File must be locked before issuing this intrinsic
- 180
(KSAM) KSAM file must be rebuilt; KSAM version does
not handle a file built by previous version
- 181
(KSAM) Invalid key starting position
- 182
(KSAM) File empty
- 183
(KSAM) Record does not contain all keys
- 184
(KSAM) Invalid record number
- 185
(KSAM) Sequence error in primary key
- 186
(KSAM) Invalid key length
- 187
(KSAM) Invalid key specification
- 188
(KSAM) Invalid device specification
- 189
(KSAM) Invalid record format
- 190
(KSAM) Invalid key blocking factor value
- 191
(KSAM) Record does not contain search key for deletion; specified key
value points to record not containing that value
- 192
(KSAM) System failure occurred while KSAM file was opened
- 193
(KSAM) $STDIN/$STDLIST cannot be redirected to KSAM
files
- 194
(KSAM) KSAM files not allowed for global AFTs
- 196
(KSAM) Language not supported
- 197
(KSAM) native language internal error
- 198
(KSAM) Invalid version number in KSAM file
- 201
(DS) Unable to access DSLINE table
- 204
(DS) Unable to allocate an extra data segment for DS/DSN 3000
- 205
(DS) Unable to expand the DS/DSN 3000 extra data segment
- 214
(DS) Requested DS line has not been opened with a DSLINE
command
- 216
(DS) Message rejected by remote computer
- 217
(DS) Insufficient amount of user stack available
- 221
(DS) Internal DS error; invalid message format
- 224
File equations for a remote file constitute a loop
- 227
RFA/RDBA could not find or create a remote session
- 239
Communication interface error; trace malfunction
- 240
(DS) Local communication line not opened by operator
- 241
(DS) DS line in use exclusively or by another subsystem
- 242
(DS) Internal DS software malfunction
- 243
(DS) Remote computer not responding
- 246
Communications interface error; remote computer disconnected
- 249
Communications interface error; unable to enter remote session
- 255
Communications interface error; connection lost
- 302
Invalid item number for FDEVICECONTROL
- 303
Invalid access for item number to FDEVICECONTROL
- 304
Attempt to change terminal parity in 8-bit mode
- 305
Invalid format in terminal configuration file
- 306
Checksum error in terminal configuration file
- 307
Passed value to FDEVICECONTROL less than minimum
- 308
Passed value to FDEVICECONTROL greater than maximum
- 309
Passed value to FDEVICECONTROL is unsupported
- 310
Count to FDEVICECONTROL insufficient for return
information
- 311
Count to FDEVICECONTROL greater than available store
information
- 312
Passed special character has previously defined function
- 313
Incompatible version of the file
- 350
KSAM lock table full
- 351
Too many record locks in one process
- 352
Record was locked already
- 353
File must be unlocked before issuing this intrinsic
- 354
Data integrity violation
- 355
File is locked by another process
- 356
Lock request rejected due to potential deadlock
- 357
Data may be invalid because file is locked by others
- 391
Name cannot be expressed using the specified syntax
- 392
Rename for the given file type is not supported
- 393
UID-GID database could not be found
- 394
User information not found in uid database
- 395
Group information not found in gid database
- 396
User lacks read acd (racd) access
- 397
A component in the pathname is not a directory
- 398
User lacks traverse directory (td) access
- 399
File attributes are not expressible as foptions
- 400
Name syntax specified is invalid
- 401
Unknown system file specified
- 402
Invalid character found in mpe syntax name
- 403
Wild card characters found in file name
- 404
Backreferenced file is not allowed
- 405
System files are not allowed
- 406
Remote environment specification is not allowed
- 407
Invalid usage of a character class
- 408
Missing file name component
- 409
File name did not start with an alphabetic characte
- 410
Specified file name is too long
- 411
Lockword in backreferenced file name is not allowed
- 412
Lockword in wildcarded file name is illegal
- 413
Lockword is missing
- 414
Lockword did not start with an alphabetic character
- 415
Specified lockword is too long
- 416
Group name is missing
- 417
Group name did not start with an alphabetic character
- 418
Specified group name is too long
- 419
Account name is missing
- 420
Account name did not start with alphabetic character
- 421
Specified account name is too long
- 422
Remote environment specification is invalid
- 423
NS3000 is not present on the system
- 424
Remote environment specification is missing
- 425
Remote environment specification is too long
- 426
HFS name component is too long
- 427
HFS pathname is too long
- 428
HFS pathname exceeded the number of levels supported
- 429
HFS pathname began with hyphen (-) character
- 430
HFS pathname began with two slashes (//)
- 431
Lower case characters are not allowed
- 432
Wild carded name may match an incorrect syntax
- 433
Specified name is not identifiable in any syntax
- 434
Lockword specification is not allowed
- 435
Illegal attempt to escape into hfs syntax from an mpe-only
syntax name
- 436
Illegal character found in hfs pathname
- 451
The specified file code is invalid in this context
- 452
File privilege level is invalid in this context
- 453
The specified file is write protected
- 454
The specified record type is invalid
- 455
The file type specified is invalid
- 456
File type specified is only supported in MPE namespace
- 457
Component of path does not exist
- 458
Trying to read/write to a pipe or FIFO and O_NONBLOCK is set
- 459
Trying to write to a pipe but it was not opened for read
- 460
Specified file domain not supported in the given namespace
- 461
User lacks create directory (CD) access
- 462
User lacks delete directory (DD) access
- 463
Write access disabled on device media
- 464
Too many symbolic links encountered in the pathname
- 465
Unable to create FLOD data structure
- 466
Unable to delete FLOD data structure
- 467
Unable to issue another lock request, limit reached
- 468
Internal HPFLOCK error
- 469
File was opened with dynamic locking, use FLOCK
- 470
Lock held by another process, request denied
- 471
No FLOD exists, incompatible file type
- 472
No such lock exists
- 473
Whence parameter out of bounds
- 474
Length parameter out of bounds
- 475
Start parameter out of bounds
- 476
Internal HPFLOCK error
- 477
Lock extends beyond the file limit
- 478
Internal HPFLOCK error, flod marked invalid
- 479
No GUFD exists, incompatible file type
- 480
No GDPD exists, incompatible file type
- 481
Command parameter out of bounds
- 482
Lock parameter out of bounds
- 483
PIN parameter out of bounds
- 484
Interrupt occured while waiting for lock
- 485
Size parameter out of bounds
- 486
Invalid file type
- 487
Lock type and file access incompatible
- 488
Conflicting read format
- 489
Tthe file type is not a symbolic link file
- 490
Tried to reply to waiters and none were found
- 491
Trying to deallocate a PLFD that is locked by another thread
- 492
Trying to deallocate a PLFD that isn't locked by your thread
- 493
An invalid operation for threads
- 494
A read or write operation was interrupted by a signal
- 495
Exec call failed because a file could not be closed
- 496
Open was interrupted by a signal and wasn't completed