MESSAGE: None
Level: 0 CLAS0001
CAUSE: Received a port message before receiving the initialization message (PARM = message function).
ACTION: See Appendix A “Submitting an SR ” of this manual.
Level: 1 CLAS0001
CAUSE: Received an invalid CP message (PARM = message function).
Level: 2 CLAS0001
CAUSE: Received an invalid SIP message (PARM = message function).
Level: 3 CLAS0001
CAUSE: Received an invalid NS format message (PARM = message function).
Level: 4 CLAS0001
CAUSE: Received an invalid NetIPC message (PARM = message function).
Level: 5 CLAS0001
CAUSE: Received an invalid message of unknown format (PARM = message function).
Level: 6 CLAS0002
CAUSE: An error result was returned on a DICTadd call. The PXP PM was therefore not started (PARM = error code).
Level: 7 CLAS0001
CAUSE: An error result was returned on a DICTadd call. The PXP SIP was therefore not started (PARM = DICT error code).
Level: 8 CLAS0004
CAUSE: The PXP PM has been started.
Level: 9 CLAS0002
CAUSE: A socket could not be opened due to a port dst problem (PARM = error code).
Level: 10 CLAS0002
CAUSE: A socket could not be opened due to a CREATEPORT' failure (PARM = PORT error code).
Level: 11 CLAS0001
CAUSE: A PXP internal error has been encountered.
Level: 12 CLAS0001
CAUSE: A PXP internal resource error has been encountered.
Level: 13 CLAS0001
Level: 14 CLAS0001
Level: 15 CLAS0001
Level: 16 CLAS0001
CAUSE: An error was returned on a DICTdelete call (PARM = DICT error code).
Level: 17 CLAS0003
CAUSE: An inbound packet was discarded as part of SIP shutdown clean-up.
ACTION: None. Informational message.
Level: 20 CLAS0006
CAUSE: Statistical summary for the deactivated PXP SIP.
ACTION: None. Statistical information.
Level: 21 CLAS0004
CAUSE: The PXP SIP has been deactivated.
ACTION: None. Nodal information.
Level: 22 CLAS0003
CAUSE: An inbound packet has been discarded because the destination PXP socket is not open.
ACTION: None.
Level: 23 CLAS0003
CAUSE: A PXP error packet was not generated because the inbound packet was a reply or error packet.
Level: 24 CLAS0002
CAUSE: A PXP error packet was not generated due to a PATH failure.
Level: 25 CLAS0003
CAUSE: Error encountered adding PXP SIP to the registry (PARM = result code returned by Reg'CM'Add'Enbtity).
ACTION: This is only a warning, but submit an SR anyway. See Appendix A “Submitting an SR ” of this manual.
Level: 26 CLAS0003
CAUSE: A PXP error packet was not generated due to a PATH failure (PARM = PATH error code).
ACTION: See PATH error explanations.
Level: 30 CLAS0003
CAUSE: A Probe error result was returned (PARM = PROBE error code).
ACTION: See Probe error explanations.
Level: 32 CLAS0003
CAUSE: An error result was returned on a PATH'get call (PARM = error code).
Level: 34 CLAS0003
CAUSE: A PXP socket could not be opened because the maximum number configured has been reached.
ACTION: Increase the number of PXP sockets configured. Use the PXP Data screen.
Level: 35 CLAS0002 CLAS0003
CAUSE: The PXP SIP received an ICMP message from the IP module (PARM = ICMP type word).
