PXP PM Logging Location Codes

CAUSE: Received an invalid NS format message (PARM = message function).

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: Received a port message before receiving the CP initialization message (PARM = message function).

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: Received an invalid SIP message (PARM = message function).

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: Received an invalid BFM message (PARM = message function).

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: Received an invalid NetIPC message (PARM = message function).

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: Received an invalid message of unknown format (PARM = message function).

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A PXP PM has been activated.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: An error result was returned on an NS'DICT'Add call. The PXP PM was therefore not started (PARM = NS'DICT'Add error code).

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A PXP internal resource error has been encountered.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A PXP internal error has been encountered.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A PXP internal resource error has been encountered.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A PXP internal error has been encountered.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: An error result was returned on an NMclosetrace call for NetIPC tracing (PARM = NM error code).

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: An inbound packet has been discarded due to a checksum error.

ACTION: Repeated checksum errors indicate a possible link problem. Refer to the NS 3000/iX Operations and Maintenance Manual.

CAUSE: An inbound packet was discarded due to a protocol header violation.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: An error packet could not be generated due to pending I/O.

ACTION: Informative message.

CAUSE: An inbound packet was discarded due to a protocol header violation.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A PXP request packet has been retransmitted (PARM = number of retransmissions performed).

ACTION: Repeated retransmissions suggest possible link or configuration problems. See PXP error code explanations.

CAUSE: PXP request failed. Retransmission-retry maximum exceeded. Possible link or configuration problems.

ACTION: See error 10 in the "Network Transport Protocol Errors" table of this manual.

CAUSE: An inbound request packet was discarded due to a lack of receive resources.

ACTION: None.

CAUSE: An inbound request packet was discarded due to a Path error.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A PXP error packet was received.

ACTION: Informative message.

CAUSE: A PXP internal resource error has been encountered.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A PXP internal resource error has been encountered.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A duplicate reply has been discarded.

ACTION: Informative message.

CAUSE: An error result was returned on a BFMbufgranted message (PARM = BFM error code).

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A PXP internal resource error has been encountered.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A PXP internal resource error has been encountered.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: An inbound packet was discarded as part of the shutdown sequence.

ACTION: Informative message.

CAUSE: An error result was returned on an N-Mclosetrace call for NetIPC tracing (PARM = NM error code).

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: A PXP PM has been deactivated.

ACTION: Informative message.

CAUSE: Statistical summary for a deactivated PXP PM.

ACTION: Statistical information.

CAUSE: A PXP error packet could not be generated due to a PATH error.

ACTION: See Appendix A “Submitting an SR ” of this manual.

CAUSE: An error result was returned on a PATH'get call (PARM = PATH error code).

ACTION: See PATH error explanations listed elsewhere in this section.

CAUSE: An error result was returned on a PATH'get call (PARM = PATH error code).

ACTION: See PATH error explanations listed elsewhere in this section.

CAUSE: An error was returned on an NS'DICT'Delete call (PARM = error result returned).

ACTION: See Appendix A “Submitting an SR ”of this manual.

CAUSE: Adding a PXP PM to the registry failed (PARM = error result returned by Reg'CM'Entity).

ACTION: This is only a warning, but submit an SR anyway. See Appendix A “Submitting an SR ” of this manual.