|
|
NS 3000/iX Operations & Maintenance Reference Manual: HP 3000 MPE/iX Computer Systems > Chapter 2 Operating Your Network Stopping Links and Services |
|
You use the NSCONTROL STOP command to stop the Network Services and the NETCONTROL STOP command to stop the links and transport. You should always stop all Network Services before you stop the network transport. NSCONTROL STOP allows all processes that are currently using the services to end normally before the services are actually terminated. If you need to stop the services immediately and do not wish to wait until current processes complete, use the NSCONTROL ABORT command. Be aware that using this command will cause errors to processes that are currently using the services. To stop a specific Network Service or group of Network Services
while the remaining active services remain active, enter the NSCONTROL NSCONTROL STOP=RFA,RFAL To stop all Network Services enter the following command: NSCONTROL STOP Current active processes that are using the services will be allowed to complete before the services are terminated. Issue the following command to stop a single network interface: NETCONTROL STOP;NET=NIname The NIname is the network interface name that you configured through NMMGR. Stop other interfaces as required by entering the command using the appropriate NI names. When you enter the STOP command with no keywords, all entities of the network transport are terminated. (You must terminate the Network Services before stopping the network transport. You will also need to use the DTCCNTRL command if you have an active host-based X.25 interface.) Enter the following command: NETCONTROL STOP If the interface you are stopping is a host-based X.25 interface, you must also issue a DTCCNTRL STOP command after you stop the network transport. Enter the commands as shown below: NSCONTROL STOP NSCONTROL ABORT NETCONTROL STOP DTCCNTRL DTC=dtcname;CARD=cardnumber;FUNC=function where function is one of the following: Title not available (To Stop a Host-Based X.25 Interface )
|
|