Device Status Messages

No Ldev or Device-key specified for Device Get.

Neither an ldev or device-key was specified.

Call AIFSYSWIDEGET to obtain a ldev or device-key.

Invalid Device Get item number specified.

A non-zero, invalid item number was passed in itemnum_array.

Pass an appropriate item number.

Invalid Ldev number specified.

The ldev specified is invalid or not configured.

Call AIFSYSWIDEGET to obtain a valid ldev.

Invalid device-key specified.

The device-key specified is invalid or not configured.

Call AIFSYSWIDEGET to obtain a valid device-key.

The item number specified is incompatible with the LDEV.

The item number is not compatible with the device type.

Use the item number which is compatible with the device type.

Internal Error.

Can not access the Device Class Table.

Contact your Hewlett-Packard support representative and be prepared to provide information on how to reproduce the problem.

Fail to convert UFID to logical device number.

Can not open the device file with the given UFID.

Use a valid UFID as input value.

Internal Error.

Can not close/purge a disc file.

Contact your Hewlett-Packard support representative and be prepared to provide information on how to reproduce the problem.

Fail to perform a control operation to a terminal device file.

The terminal may be in an inappropriate state or the operation is not supported.

Contact Hewlett-Packard for support.

Fail to perform a control operation to a printer device file.

The printer may be in an inappropriate state or the operation is not supported.

Check the device state or the functionality requested.

Fail to perform a control operation to a tape device file.

The tape may be in an inappropriate state or the operation is not supported.

Contact Hewlett-Packard for support.

Fail to perform a control operation to a disc device file.

The disc may be in an inappropriate state or the operation is not supported.

Check the device state or the functionality requested.

The device type is incompatible with the requested functionality.

The control operation can not be performed on this type of device.

Do not request the control operation on this device type.

The device is not configured.

The device is not configured.

Check the IO configuration.

The given item number is not a valid PUT item for device PUT.

The item number is not valid for device PUT.

Pass an appropriate item number.

The given item number in the verification array is not valid for AIFDEVICEPUT

An invalid item number was passed in the verification array.

Pass an appropriate item number.

The given item value in the items_array is not valid for AIFDEVICEGET/PUT.

An invalid item value was passed.

Pass an appropriate item value.

Failed to perform the requested device control operation.

AIF can not complete the request because of IO problems.

Check to see if the requested operation is valid for the device type.

The device is not available.

For printer, serial printer, or tape device, the device should have already been opened. For terminal device, a problem occured when AIF tried to open the device.

Check the availability of the device.

Failed to access the device.

An error was returned while trying to access the device.

Verify that the device number is correct.

Internal error.

JSINFO returned a bad status.

Contact your Hewlett-Packard support representative and be prepared to provide information on how to reproduce the problem.

Unable to return security logon attempt information.

The security information was not found.

The HP 3000 Security Monitor/iX is not found. Check with the system manager.

Unable to return security terminal password information.

The security information was not found.

The HP 3000 Security Monitor/iX is not found. Check with the system manager.

No Device Class Name or Device Class Key specified for Device Class Get.

Neither a device class name or key was specified.

Call AIFSYSWIDEGET to obtain a device class name or key.

Invalid Device Class Get item number specified.

A non-zero, invalid item number was passed in itemnum_array.

Pass an appropriate item number and end with a zero.

Internal Error.

Unexpected ESCAPE from table locking in AIFDEVCLASSGET.

Contact your Hewlett-Packard support representative and be prepared to provide information on how to reproduce the problem.

Internal Error.

Unexpected ESCAPE from table unlocking in AIFDEVCLASSGET.

Contact your Hewlett-Packard support representative and be prepared to provide information on how to reproduce the problem.

Mismatching device key and name.

The device key and the device name passed do not identify the same device.

Check the device key and the device name.

The I/O device class returned is not recognized by AIF.

AIF internal error.

Contact your Hewlett-Packard support representative and be prepared to provide information on how to reproduce the problem.

Media manager process not created.

The program HPOPTMGR.PUB.SYS program was not run at system startup.

Run HPOPTMGR.PUB.SYS and retry AIF operation.

Unable to open the media information file on optical disk.

The media information file on the optical disk could not be opened.

Re-initialize media via the MOUTIL INITMO command and retry AIF operation.

MOUTIL SYNCTABLE in progress by another process. Try again later.

A SYNCTABLE was invoked by another process using the optical disk library system.

Retry AIF operation later.

Invalid PIN specified.

AIF specified an invalid PIN for operation.

Retry AIF operation with valid PIN - PIN of process who has drive allocated.

Invalid optical disk drive ldev specified.

AIF specified an invalid optical disk drive ldev.

Retry AIF operation with valid optical disk drive ldev.

Optical disk ldev currently in use by another process.

The optical disk ldev is currently in use by another process.

Retry the AIF operation or use another optical disk ldev.

Optical disk ldev currently not allocated.

The optical disk ldev must be allocated for this AIF operation.

Allocate the optical disk ldev and retry the AIF operation.

All drives are currently allocated.

An allocate by media name was performed and all drives accessible to the media are currently allocated.

Retry the AIF operation when a drive is available.

Media currently mounted in the specified drive.

A mount was performed on a drive that already had media mounted.

Wait for media to be dismounted before attempting mount.

Expected media not mounted in expected optical disk ldev.

Expected media not mounted in expected optical disk ldev.

Mount media in the optical disk ldev and retry the AIF operation. If this fails, perform the MOUTIL SYNCTABLE command for this optical disk ldev.

Requested optical disk library media currently in use.

The requested media is currently being used.

Retry the AIF operation with another piece of media.

Requested optical media not found.

The requested optical media can not be found within the optical library system.

Retry the AIF operation specifying a different piece of media.

Requested optical media currently in use.

The requested optical media is currently being used.

Retry the AIF operation specifying a different piece of media.

Media label found, but no drive currently available to allocate.

An allocate by media name was performed and all drives accessible to the media are currently allocated.

Retry the AIF operation when a drive is available.

Verification of media label failed.

Specificied media label does not match media label for the mounted media.

Retry AIF operation with a different media label to verify against.

Volume close error occurred.

A volume close error occurred during dismount of volume set. Files possibly still opened on the volume set.

Once all files are closed on the volume set invoke AIFDISMOMOUNT to dismount the media.

Media Manager class error occurred.

Internal error.

Contact your Hewlett Packard support representative.

Autochanger error occurred.

Internal error.

Contact your Hewlett Packard support representative.

Magneto-optical drive error occurred.

Internal error.

Contact your Hewlett Packard support representative.

Magneto-optical drive allocation error occurred.

Internal error.

Contact your Hewlett Packard support representative.

General device error.

Internal error.

Contact your Hewlett Packard support representative.

Media moving error.

Internal error.

Contact your Hewlett Packard support representative.

Media label operation error.

Internal error.

Contact your Hewlett Packard support representative.

Volume Management error.

Internal error.

Contact your Hewlett Packard support representative.

Media Manager internal error.

Media manager returned an error, but from a another Subsys.

Contact your Hewlett Packard support representative.

Invalid item number passed in itemnum_array to AIFMOALLOCATE.

A non-zero invalid item number was passed in itemnum_array.

Pass an appropriate value and end with a zero.

Invalid item number passed in itemnum_array to AIFMODEALLOCATE.

A non-zero invalid item number was passed in itemnum_array.

Pass an appropriate value and end with a zero.

Invalid item number passed in itemnum_array to AIFMOMOUNT.

A non-zero invalid item number was passed in itemnum_array.

Pass an appropriate value and end with a zero.

Invalid item number passed in itemnum_array to AIFMODISMOUNT.

A non-zero invalid item number was passed in itemnum_array.

Pass an appropriate value and end with a zero.

Unable to get the pointer to magneto-optical AIF known process object.

GET_KPO_POINTER returned a bad status.

Contact your Hewlett Packard support representative.

Unable to create the magneto-optical AIF known process object.

CREATE_OBJECT returned a bad status.

Contact your Hewlett Packard support representative.

Unable to create the media manager reply port.

CREATE_PORT returned a bad status.

Contact your Hewlett Packard support representative.

Unable to get the media manager port number.

The optical media manager is not running due to not having an optical disk library system configured, the media manager encountering a fatal error, or the program HPOPTMGR.PUB.SYS not being run.

Verify that a optical disk library system is configured, investigate any media manager errors displayed on the console, run the program HPOPTMGR.PUB.SYS.

Unable to set the pointer to magneto-optical AIF known process object.

SET_KPO_POINTER returned a bad status.

Contact your Hewlett Packard support representative.

The maximum number of nowait requests have been made for this pin.

The maximum number of combined nowait mounts or dismounts that can be outstanding for a pin is 32.

Complete outstanding nowait mounts or dismounts and retry AIF operation.

Invalid nowait identifier specified.

An invalid nowait identifier was specified.

Specify a valid nowait identifier and retry AIF operation.

Only one of optical drive or media label can be specified.

Both optical drive and media label were specified.

Specify only one of optical drive or media label and retry AIF operation.

Invalid value for prompt for media item.

Prompt for media value must be 1,2, or 3.

Specify valid prompt for media item and retry AIF operation.

Volume set item invalid when nowait item specified with initialization value.

Volume set item can not be specified when nowait item is specified with initialization value.

Specify only one of volume set item or nowait item with initialization value and retry AIF operation.

Error opening the media manager database.

The media manager database could not be opened. Possibly due to the optical media manager not running. This could be due to not having an optical disk library system configured, the media manager encountering a fatal error, or the program HPOPTMGR.PUB.SYS not being run.

Verify that a optical disk library system is configured, investigate any media manager errors displayed on the console, run the program HPOPTMGR.PUB.SYS.

Invalid autochanger or mounted optical disk ldev specified.

An invalid autochanger or mounted optical disk ldev was specified. The optical media manager may not be running.

Specify a valid autochanger or mounted optical disk ldev and retry AIF operation.

Autochanger not configured.

The specified autochanger is not configured on the system. The optical media manager may not be running.

Retry AIF operation with a configured autochanger.

MOUTIL SYNCTABLE required or currently in progress by another process.

A SYNCTABLE was invoked by another process using the optical disk library system or a SYNCTABLE is required.

Perform MOUTIL SYNCTABLE and retry operation later.

Optical drive not allocated by specified PIN.

AIF specified an invalid PIN for operation.

Retry AIF operation with valid PIN - PIN of process who has drive allocated.

Media not mounted on optical drive ldev.

Media not mounted on optical drive ldev.

Mount media in the optical disk ldev and retry the AIF operation.

Error obtaining the mounted volume entry for the specified ldev.

VLM_OBTAIN_MVT_ENTRY returned a bad status.

Contact your Hewlett Packard support representative.

Mounted media unavailable.

VLM_OBTAIN_MVT_ENTRY returned status that the state of the mounted volume is unavailable.

Contact your Hewlett Packard support representative.

Unable to open the media information file on optical disk.

The media information file on the optical disk could not be opened.

Re-initialize media via the MOUTIL INITMO command and retry AIF operation.

Invalid optical disk drive ldev specified.

AIF specified an invalid optical disk drive ldev.

Retry AIF operation with valid optical disk drive ldev.

Invalid autochanger specified.

AIF specified an invalid autochanger.

Retry AIF operation with valid autochanger.

Invalid lower range for storage slot info specified. Lower range must be greater than or equal to one and less than or equal to the upper range.

Invalid lower range for storage slot info specified.

Retry AIF operation with valid lower range for storage slot info.

Invalid upper range for storage slot info specified.

Invalid upper range for storage slot info specified. Upper range must be greater than or equal to one.

Retry AIF operation with valid upper range for storage slot info.

Invalid item number passed in itemnum_array to AIFMOGET.

A non-zero invalid item number was passed in itemnum_array.

Pass an appropriate value and end with a zero.

Invalid item number passed in ver_itemnum_array to AIFMOPUT.

A non-zero invalid item number was passed in ver_itemnum_array.

Pass an appropriate value and end with a zero.

Invalid item number passed in itemnum_array to AIFMOPUT.

A non-zero invalid item number was passed in itemnum_array.

Pass an appropriate value and end with a zero.

Invalid media label specified.

The first character of the media name, subname1, or subname2, is "@".

Pass a media name, subname1, or subname2 whose first character is not "@".

The specified optical drive is not allocated.

This warning will be returned when AIFMODEALLOCATE is called to deallocate a drive that has not been previously allocated.

No action.

The specified optical drive already hard allocated by PIN.

This warning will be returned when AIFMOALLOCATE is called to allocate a drive that has already been allocated by the requesting PIN.

No action.

Magneto-Optical drive allocation warning occurred.

Internal Warning.

No action.

Autochanger unlock warning occurred.

Internal Warning.

No action.

Autochanger lock warning occurred.

Internal Warning.

No action.

Pin item has already been specified.

Pin item was specified more than once in the AIF request. The first pin item specified will be used.

No action.

Ldev item has already been specified.

Ldev item was specified more than once in the AIF request. The first ldev item specified will be used.

No action.

Media label item has already been specified.

Media label item was specified more than once in the AIF request. The first media label item specified will be used.

No action.

Prompt item has already been specified.

Prompt item was specified more than once in the AIF request. The first prompt item specified will be used.

No action.

Volume set item has already been specified.

Volume item was specified more than once in the AIF request. The first volume item specified will be used.

No action.

Nowait item has already been specified.

Nowait item was specified more than once in the AIF request. The first nowait item specified will be used.

No action.

MOUTIL SYNCTABLE in progress by another process. Data may be invalid.

A SYNCTABLE was invoked by another process using the optical disk library system.

Retry AIF operation later.

Media label verify item has already been specified.

Media label verify item was specified more than once in the AIF request. The first media label verify item specified will be used.

No action.

Volume set verify item has already been specified.

Volume set verify item was specified more than once in the AIF request. The first volume set verify item specified will be used.

No action.