- 351, MESSAGE
ACTION DISALLOWED SINCE NOT CREATOR OF FILE
- , CAUSE
You must be the creator of the file in order to to use the
:ALTSEC command to change security restrictions
- , ACTION
For information only
- 353, MESSAGE
DISC I/O ERROR RELATED TO FILE LABEL ACCESS
- , CAUSE
An error was encountered by the input/output device when trying to get
the file label
- , ACTION
Re-issue command. If error message occurs again, contact your
System Manager
- 410, MESSAGE
ALTSEC REQUIRES AT LEAST A FILE NAME
- , CAUSE
You did not specify a file name. You must provide at least a file name
in order to change any security restrictions
- , ACTION
Provide a file name
- 411, MESSAGE
EXTRANEOUS PARAMETER TO ALTSEC
- , CAUSE
The :ALTSEC command does not recognize one of the parameters that
you specified on the command line
- , ACTION
Check the MPE XL Commands Reference Manual (3265-90003)
for the valid :ALTSEC command parameters.
- 500, MESSAGE
EXPECTED "(" TO START SECURITY SPECIFICATIONS
- , CAUSE
The left parenthesis was not included at the beginning of the security
specifications
- , ACTION
Include the left parenthesis on the command line
- 501, MESSAGE
EXPECTED a ")" following the SECURITY SPECIFICATIONS
- , CAUSE
The right parenthesis was not included at the end of the security
specifications
- , ACTION
Include the right parenthesis on the command line
- 502, MESSAGE
EXPECTED ONE OF R,A,W,L, or X FILE ACCESS MODES
- , CAUSE
You did not include a valid file access mode (READ, APPEND, WRITE,
LOCK, or EXECUTE) on the command line
- , ACTION
Specify a valid file access mode
- 503, MESSAGE
EXPECTED ONE OF R,A,W,L,X, or S GROUP FILE ACCESS MODES
- , CAUSE
You did not include a valid group file access mode (READ, APPEND,
WRITE, LOCK, or EXECUTE) on the command line
- , ACTION
Specify a valid group file access mode
- 504, MESSAGE
EXPECTED ONE OF R,A,W,L, or X ACCOUNT FILE ACCESS MODES
- , CAUSE
You did not include a valid account file access mode (READ,
APPEND, WRITE, LOCK, or EXECUTE,) on the command line
- , ACTION
Specify a valid account file access mode
- 505, MESSAGE
IGNORED. SAVE ACCESS HAS NO MEANING AT FILE LEVEL
- , CAUSE
You cannot specify SAVE access at the file level
- , ACTION
This message is informational only.
- 506, MESSAGE
IGNORED. SAVE ACCESS NOT ALLOWED AT ACCOUNT LEVEL
- , CAUSE
You cannot specify SAVE access at the account level
- , ACTION
This message is informational only
- 507, MESSAGE
EXPECTED "colon" SEPARATING MODE LIST FROM USER LIST
- , CAUSE
You did not include a colon (:) between the mode list and the
user list
- , ACTION
Include a colon (:) on the command line
- 508, MESSAGE
EXPECTED ONE OF ANY AC, AL, GU, GL, OR CR USER TYPES
- , CAUSE
You did not include an acceptable user type. Acceptable user
types are Any, Account User (AC), Account Librarian (AL), Group User (GU),
Group Librarian (GL), or Creator (CR)
- , ACTION
Specify an acceptable user type
- 509, MESSAGE
EXPECTED ONE OF ANY, AC, AL, GU, or GL USER TYPES
- , CAUSE
You did not include an acceptable user type. Acceptable user
types are for this command are Any, Account User (AC), Account Librarian
(AL), Group User (GU), or Group Librarian (GL)
- , ACTION
Specify an acceptable user type
- 510, MESSAGE
EXPECTED EITHER ANY or AC USER TYPE
- , CAUSE
You did not include an acceptable user types for this command.
Acceptable user types are Any, or Account User (AC)
- , ACTION
Specify an acceptable user type
- 511, MESSAGE
USER TYPE CR NOT ALLOWED AT GROUP LEVEL
- , CAUSE
The Creator (CR) user type is not allowed at the group level
- , ACTION
This message is informational only.
- 512, MESSAGE
THIS USER TYPE NOT ALLOWED AT ACCOUNT LEVEL
- , CAUSE
You specified a user type that is not allowed at the account level
- , ACTION
This message is informational only
- 513, MESSAGE
READ ACCESS FOR THIS USER TYPE REDUNDANTLY SPECIFIED
- , CAUSE
You specified read access more than once on the same command line
- , ACTION
This message is informational only
- 514, MESSAGE
APPEND ACCESS FOR THIS USER TYPE REDUNDANTLY SPECIFIED
- , CAUSE
You specified append access more than once on the same command line
- , ACTION
This message is informational only
- 515, MESSAGE
WRITE ACCESS FOR THIS USER TYPE REDUNDANTLY SPECIFIED
- , CAUSE
You specified write access more than once on the same command line
- , ACTION
This message is informational only
- 516, MESSAGE
LOCK ACCESS FOR THIS USER TYPE REDUNDANTLY SPECIFIED
- , CAUSE
You specified lock access more than once on the same command line
- , ACTION
This message is informational only
- 517, MESSAGE
EXECUTE ACCESS FOR THIS USER TYPE REDUNDANTLY SPECIFIED
- , CAUSE
You specified execute access more than once on the same command
line
- , ACTION
This message is informational only.
- 518, MESSAGE
SAVE ACCESS FOR THIS USER TYPE REDUNDANTLY SPECIFIED
- , CAUSE
You specified save access more than once on the same command
line
- , ACTION
This message is informational only
- 519, MESSAGE
THIS ACCESS MODE REDUNDANTLY SPECIFIED ON THIS ACCESS LIST
- , CAUSE
One of the access modes that you specified was repeated in the
access list
- , ACTION
This message is informational only
- 530, MESSAGE
FIRST CHARACTER IN FILE NAME NOT ALPHABETIC
- , CAUSE
You specified something other than an alphabetic character at
the beginning of the file name. You probably mistyped the file name
- , ACTION
Retype the command
- 531, MESSAGE
FILE NAME MISSING
- , CAUSE
You did not include a file name on the command line
- , ACTION
Specify a file name
- 532, MESSAGE
FILE NAME is more than eight CHARACTERS LONG
- , CAUSE
The file name that you specified is greater than eight characters, and file names can only be eight characters or fewer in length. You probably mistyped the file name
- , ACTION
Retype the command
- 534, MESSAGE
FILE NAME CONTAINS EMBEDDED NON-ALPHANUMERIC CHARACTERS
- , CAUSE
File names can contain both alphabetic and numeric characters.
One of the characters in your file name is neither alphabetic nor numeric.
You probably mistyped the file name
- , ACTION
Retype the command.
- 535, MESSAGE
MISSING DELIMITER AFTER FILE NAME
- , CAUSE
You did not include a delimiter after the file name
- , ACTION
Include a delimiter (semi-colon, comma, period, or space),
after the file name. See the MPE XL Commands Reference Manual
(32650-90003) for the correct syntax
- 540, MESSAGE
FIRST CHARACTER IN GROUP NAME NOT ALPHABETIC
- , CAUSE
The first character of your group name is nonalphabetic. You
probably mistyped the group name
- , ACTION
Retype the command
- 541, MESSAGE
GROUP NAME MISSING
- , CAUSE
You did not specify a group name on the command line
- , ACTION
Specify a group name on the command line
- 542, MESSAGE
GROUP NAME is more than eight CHARACTER LONG
- , CAUSE
Your group name is greater than eight characters, and group
names can only be eight characters or fewer in length. You probably mistyped
the group name
- , ACTION
Retype the command
- 544, MESSAGE
EMBEDDED NON-ALPHANUMERIC CHARACTER IN GROUP NAME.
- , CAUSE
Characters in group names can be both alphabetic and numeric.
One of the characters in your group name is neither alphabetic nor numeric.
You
probably mistyped the group name
- , ACTION
Retype the command
- 550, MESSAGE
FIRST CHARACTER IN ACCOUNT NAME NOT ALPHABETIC
- , CAUSE
The first character of an account name must be alphabetic, and
yours is not. You probably mistyped the account name
- , ACTION
Retype the command.
- 551, MESSAGE
ACCOUNT NAME MISSING
- , CAUSE
You did not include an account name on the command line
- , ACTION
Specify an account name on the command line
- 552, MESSAGE
ACCOUNT NAME is more than eight CHARACTERS LONG
- , CAUSE
The account name that you specified is greater than eight
characters. Account names can only be eight characters or fewer in length.
You probably mistyped the account name
- , ACTION
Retype the command
- 554, MESSAGE
EMBEDDED NON-ALPHANUMERIC CHARACTER IN ACCOUNT NAME
- , CAUSE
Account names can consist of both alphabetic and numeric
characters. One of the characters in the account name that you specified is
neither alphabetic nor numeric. You probably mistyped the account name
- , ACTION
Retype the command
- 590, MESSAGE
FIRST CHARACTER IN USER NAME NOT ALPHABETIC
- , CAUSE
The first character of the user name that you specified is not
alphabetic. You probably mistyped the user name
- , ACTION
Retype the command
- 591, MESSAGE
USER NAME IS MISSING
- , CAUSE
You did not include a user name on the command line
- , ACTION
Specify a user name
- 592, MESSAGE
USER NAME is more than eight CHARACTERS LONG
- , CAUSE
The user name that you specified is greater than eight
characters. User names can only be eight characters or fewer in length. You
probably mistyped the user name
- , ACTION
Retype the command.
- 594, MESSAGE
EMBEDDED NON-ALPHANUMERIC CHARACTER IN USER NAME
- , CAUSE
User names can consist of both alphabetic and numeric
characters. One of the characters in the user name that you specified is
neither alphabetic nor numeric. You probably mistyped the user name
- , ACTION
Retype the command
- 730, MESSAGE
ALTACCT CAN HANDLE A MAXIMUM OF 71 PARAMETERS
- , CAUSE
You have specified too many parameters on the command line
- , ACTION
Consult the MPE XL Commands Reference Manual (32650-90003) for
acceptable parameters
- 731, MESSAGE
ALTGROUP CAN HANDLE A MAXIMUM OF 71 PARAMETERS
- , CAUSE
You have specified too many parameters on the command line
- , ACTION
Consult the MPE XL Commands Reference Manual (32650-90003) for
acceptable parameters
- 732, MESSAGE
ALTUSER CAN HANDLE A MAXIMUM OF 71 PARAMETERS
- , CAUSE
You have specified too many parameters on the command line
- , ACTION
Consult the MPE XL Commands Reference Manual (32650-90003) for
acceptable parameters
- 733, MESSAGE
NEWACCT CAN HANDLE A MAXIMUM OF 71 PARAMETERS
- , CAUSE
You have specified too many parameters on the command line
- , ACTION
Consult the MPE XL Commands Reference Manual (32650-90003 for
acceptable parameters
- 734, MESSAGE
NEWGROUP CAN HANDLE A MAXIMUM OF 71 PARAMETERS
- , CAUSE
You have specified too many parameters on the command line
- , ACTION
Consult the MPE XL Commands Reference Manual (32650-90003) for
acceptable parameters.
- 735, MESSAGE
NEWUSER CAN HANDLE A MAXIMUM OF 71 PARAMETERS
- , CAUSE
You have specified too many parameters on the command line
- , ACTION
Consult the MPE XL Commands Reference Manual (32650-90003) for
acceptable parameters
- 736, MESSAGE
EXPECTED COMMA AFTER ACCOUNT NAME, BEFORE MANAGER'S
NAME
- , CAUSE
You failed to include a comma between the account name
and the manager's name
- , ACTION
Include a comma between the account name and the manager's
name
- 737, MESSAGE
EXPECTED ONE OF THE FOLLOWING KEYWORDS: PASS,
FILES, CPU, CONNECT, CAP, ACCESS, MAXPRI, LOCATER, VS, HOMEVS
- , CAUSE
The command that you issued expected to see one of the
parameters listed above. You specified a parameter that the command does not
recognize
- , ACTION
Delete the parameter that is not specified in the list of
accepted command parameters
- 738, MESSAGE
THE SYNTAX REQUIRES THAT AN EQUAL SIGN (=) FOLLOWS
KEYWORD
- , CAUSE
You did not include an equal sign (=) following one of the
keywords on the command line
- , ACTION
Find the keyword that is not followed by an equal sign (=) and
enter one
- 739, MESSAGE
EXPECTED ONE OF: PASS, FILES, CPU, CONNECT, CAP, ACCESS,
MAXPRI, LOCATER, ONVS or HOMEVS
- , CAUSE
The command that you issued expected to see one of the
parameters listed above. You specified a parameter that the command does not
recognize
- , ACTION
Delete the parameter that is not specified in the list of
accepted command parameters.
- 740, MESSAGE
UNIDENTIFIABLE PARAMETER. POSSIBLY A DELIMITER WAS
OMITTED
- , CAUSE
The command that you issued does not recognize one of the
parameters. It might be that you did not include a delimiter (semi-colon,
comma, period, or space), between parameters
- , ACTION
Check the MPE XL Commands Reference Manual (32650-90003) and
make sure that you did not omit a delimiter. If you did, enter it
- 741, MESSAGE
ACCESS INAPPROPRIATE FOR USER
- , CAUSE
One of the access modes that you specified on the command line
is not allowed for users
- , ACTION
Check the allowable access modes in the MPE XL Commands
Reference Manual (32650-90003) and change the command
- 742, MESSAGE
ACCESS REDUNDANTLY SPECIFIED. LAST OCCURRENCE USED
- , CAUSE
One of the access modes that you specified on the command line
was repeated. The last occurrence of the access mode is the one that will be
used
- , ACTION
This message is informational only
- 743, MESSAGE
EXPECTED ONE OF AS, BS, CS, DS, OR ES
- , CAUSE
You did not specify an acceptable priority
- , ACTION
Specify an acceptable priority level
- 744, MESSAGE
MAXPRI REDUNDANTLY SPECIFIED. LAST OCCURRENCE USED
- , CAUSE
You specified the MAXPRI parameter twice on the same command
line. The last MAXPRI value that was specified is the one implemented by the
command
- , ACTION
This message is informational only.
- 745, MESSAGE
MAXPRI INAPPROPRIATE FOR GROUPS. IGNORED
- , CAUSE
The MAXPRI parameter cannot be specified for groups. It was
ignored
- , ACTION
This message is informational only
- 746, MESSAGE
CAPABILITY LIST REDUNDANTLY SPECIFIED. LAST OCCURRENCE
USED
- , CAUSE
You specified the CAP parameter twice on the same command line.
The last CAP list that was specified is the one implemented by the command
- , ACTION
This message is informational only
- 747, MESSAGE
NO CAPABILITY SPECIFIED. IGNORED
- , CAUSE
You did not specify any capabilities in your capability list
- , ACTION
This message is informational only
- 748, MESSAGE
EXPECTED ONE OF: SM, AM, AL, GL, DI, OP, PH, DS, MR,
PM, IA, BA, CS, ND, SF, UB, CV, LG, NA, NM or PS
- , CAUSE
You did not specify an acceptable capability
- , ACTION
See this manual for a definition of acceptable capabilities
- 749, MESSAGE
THIS CAPABILITY INAPPROPRIATE FOR GROUPS. IGNORED
- , CAUSE
One of the capabilities in your capability list cannot be
specified for groups. It was ignored
- , ACTION
This message is informational only
- 750, MESSAGE
THIS CAPABILITY REDUNDANTLY SPECIFIED. IGNORED
- , CAUSE
You specified a capability twice in the capability list. There
should be a caret pointing to the repeated capability
- , ACTION
This message is informational only.
- 751, MESSAGE
CREATOR SPECIFIED NEITHER IA NOR BA FOR ACCOUNT, SO
BOTH WERE IMPOSED
- , CAUSE
You did not specify either interactive access (IA) or batch
access (BA) for the account. These must be specified
- , ACTION
This message is informational only
- 752, MESSAGE
CREATOR SPECIFIED NEITHER IA NOR BA FOR USER,
SO BOTH WERE IMPOSED
- , CAUSE
You did not specify either interactive access (IA) or batch
access (BA) for the user. These must be specified
- , ACTION
This message is informational only
- 753, MESSAGE
LOCAL ATTRIBUTE INAPPROPRIATE FOR GROUPS. IGNORED
- , CAUSE
The LOCAL attribute cannot be specified for groups. The
attribute was ignored
- , ACTION
This message is informational only
- 754, MESSAGE
ACCOUNT MANAGER NAME MUST BE SPECIFIED IN :NEWACCT
- , CAUSE
You neglected to specify the name of the account manager. The
:NEWACCT command requires the name of the account manager
- , ACTION
Specify the name of the account manager
- 755, MESSAGE
MANAGER NAME MUST START WITH ALPHABETIC CHARACTER
- , CAUSE
The first character of the manager name is not alphabetic. You
probably mistyped the command
- , ACTION
Retype the command
- 756, MESSAGE
MANAGER NAME CANNOT BE MORE THAN 8 CHARACTERS LONG
- , CAUSE
The name of the manager is too long. Eight characters or fewer
is the limit. You probably mistyped the command
- , ACTION
Retype the command.
- 758, MESSAGE
EMBEDDED SPECIAL CHARACTER IN MANAGER'S NAME
- , CAUSE
The name of the manager can consist of both alphabetic and
numeric characters. One of the characters in your manager name is neither
alphabetic nor numeric. You probably mistyped the command
- , ACTION
Retype the command
- 760, MESSAGE
PASSWORD MUST START WITH ALPHABETIC CHARACTER
- , CAUSE
The password that you specified does not start with an
alphabetic character. You probably mistyped the command
- , ACTION
Retype the command
- 761, MESSAGE
PASSWORD REDUNDANTLY SPECIFIED. LAST OCCURRENCE USED
- , CAUSE
You specified a password twice on the command line. The last
occurrence of the password specification is the one implemented
- , ACTION
This message is informational only
- 762, MESSAGE
PASSWORD CANNOT BE MORE THAN 8 CHARACTERS LONG
- , CAUSE
You specified a password that has more than eight characters.
A password can only be eight characters or fewer. You probably mistyped the
command
- , ACTION
Retype the command
- 764, MESSAGE
EMBEDDED NON-ALPHANUMERIC CHARACTER IN PASSWORD
- , CAUSE
You specified a password with a character that is neither
alphabetic nor numeric. You probably mistyped the command
- , ACTION
Retype the command
- 765, MESSAGE
HOME GROUP OPTION APPROPRIATE ONLY TO USERS. IGNORED
- , CAUSE
You specified the home group option for an account or a group.
It may only be specified for users
- , ACTION
This message is informational only.
- 767, MESSAGE
FILES OPTION INAPPROPRIATE FOR USERS. IGNORED
- , CAUSE
You cannot specify the FILES option for a user
- , ACTION
This message is informational only
- 768, MESSAGE
EXPECTED POSITIVE INTEGER <2,147,483,647 AS SECTORS LIMIT
- , CAUSE
You specified a sectors limit with the FILES option that is
greater than 2147483647
- , ACTION
Specfiy a new sectors limit that is less than 2147483647
- 769, MESSAGE
FILE SECTOR LIMIT MAY NOT BE A NEGATIVE NUMBER
- , CAUSE
You specified a negative number for the file sector limit. It
must be a positive number
- , ACTION
Specfiy a new sectors limit with a positive number
- 770, MESSAGE
FILE SECTOR LIMIT REDUNDANTLY SPECIFIED. LAST USED
- , CAUSE
You specified the file sector limit twice on the same command
line. The last file sector limit specification is the one implemented
- , ACTION
This message is informational only
- 771, MESSAGE
VS OPTION INAPPROPRIATE FOR USERS. IGNORED
- , CAUSE
You cannot specify the ONVS option for a user. It was ignored
- , ACTION
This message is informational only
- 773, MESSAGE
CPU LIMIT OPTION INAPPROPRIATE FOR USERS. IGNORED
- , CAUSE
You cannot specify the CPU limit option for a user. It was
ignored
- , ACTION
This message is informational only.
- 774, MESSAGE
EXPECTED POSITIVE INTEGER <2,147,483,647 AS CPU SECONDS
LIMIT
- , CAUSE
You specified a CPU limit that is greater than 2147483647
- , ACTION
Specfiy a new CPU limit that is less than 2147483647
- 775, MESSAGE
CPU SECONDS LIMIT MAY NOT BE A NEGATIVE NUMBER
- , CAUSE
You specified a negative number for the CPU seconds limit.
Only a positive number is allowed
- , ACTION
This message is informational only
- 776, MESSAGE
CPU SECONDS LIMIT REDUNDANTLY SPECIFIED. LAST USED
- , CAUSE
You specified a CPU seconds limit more than once on the same
command line. The last CPU seconds limit specification is the one
implemented
- , ACTION
This message is informational only
- 779, MESSAGE
CONNECT TIME OPTION INAPPROPRIATE FOR USERS. IGNORED
- , CAUSE
You cannot specify the connect time option for a user. It was
ignored
- , ACTION
This message is informational only
- 781, MESSAGE
CONNECT TIME LIMIT MAY NOT BE A NEGATIVE NUMBER
- , CAUSE
You specified a negative number for the connect time limit
option. Only a positive number is allowed
- , ACTION
Specify a new connect time limit that is a positive number
- 782, MESSAGE
CONNECT TIME LIMIT REDUNDANTLY SPECIFIED. LAST USED
- , CAUSE
You specified a connect time limit more than once on the same
command line. The last connect time limit specification is the one
implemented
- , ACTION
This message is informational only.
- 784, MESSAGE
"SM" CAPABILITY CANNOT BE REMOVED FROM
MANAGER.SYS. COMMAND REJECTED
- , CAUSE
You cannot remove System Manager (SM) capability from
MANAGER.SYS
- , ACTION
Review account structure capabilities in this manual
- 785, MESSAGE
ATTEMPT TO REMOVE SM CAPABILITY FROM SYS ACCOUNT
OVERRIDDEN
- , CAUSE
You cannot remove System Manager (SM) capability the SYS
account
- , ACTION
Review account structure capabilities in this manual
- 786, MESSAGE
FILE SPACE LIMIT REQUESTED LESS THAN ACTUAL SPACE
ALREADY IN USE. COMMAND REJECTED WITH NO CHANGES
- , CAUSE
You have requested a file space limit that is less than the
space already in use
- , ACTION
This message is informational only
- 787, MESSAGE
GROUP CPU LIMIT REQUESTED EXCEEDS ACCOUNT LIMIT. GROUP
LIMIT LOWERED TO ACCOUNT LIMIT
- , CAUSE
The group CPU limit cannot exceed the account CPU limit
- , ACTION
The group CPU limit that you specified has automatically been
lowered to the account CPU limit
- 788, MESSAGE
GROUP CONNECT TIME LIMIT REQUESTED EXCEEDS ACCOUNT
LIMIT. GROUP LIMIT LOWERED TO ACCOUNT LIMIT
- , CAUSE
The group connect time limit cannot exceed the account connect
time limit
- , ACTION
The group connect time limit that you specified has
automatically been lowered to the account connect time limit
- 789, MESSAGE
GROUP FILE SPACE LIMIT REQUESTED EXCEEDS ACCOUNT LIMIT.
GROUP LIMIT LOWERED TO ACCOUNT LIMIT
- , CAUSE
You have requested a group file space limit that exceeds the
account file space limit
- , ACTION
The group file space limit has automatically been lowered to
the account file space limit.
- 790, MESSAGE
GROUP CAPABILITIES REQUESTED EXCEED ACCOUNT
CAPABILITIES "NOT" GRANTED
- , CAUSE
The group capabilities cannot exceed the account capabilities
- , ACTION
This message is informational only
- 791, MESSAGE
GROUP FILE SPACE LIMIT REQUESTED LESS THAN ACTUAL SPACE
ALREADY IN USE. COMMAND REJECTED
- , CAUSE
You have requested a group file space limit that is less than
the space that is already in use
- , ACTION
This message is informational only
- 792, MESSAGE
ACCOUNT MANAGER ATTEMPTED TO REMOVE HIS OWN ACCOUNT
MANAGER CAPABILITY. COMMAND REJECTED
- , CAUSE
You cannot remove account manager capability from the account
manager account
- , ACTION
This message is informational only
- 793, MESSAGE
USER MAXPRI REQUESTED IS GREATER THAN THE ACCOUNT
MAXPRI. USER MAXPRI LOWERED TO ACCOUNT'S
- , CAUSE
The group maximum priority level cannot exceed the account
maximum priority level
- , ACTION
The group connect maximum priority level that you specified has
automatically been lowered to the account maximum priority level
- 794, MESSAGE
USER CAPABILITIES REQUESTED EXCEED ACCOUNT
CAPABILITIES. "NOT" GRANTED
- , CAUSE
User capabilities cannot exceed account capabilities
- , ACTION
This message is informational only.
- 795, MESSAGE
USER ASSIGNED LOCAL ATTRIBUTES GREATER THAN THE
ACCOUNT LOCAL ATTRIBUTES. LOWERED TO ACCOUNT'S
- , CAUSE
User local attributes cannot be greater than the account's
local attributes
- , ACTION
The user local attributes were automatically lowered to the
account's local attributes
- 796, MESSAGE
HOME GROUP REDUNDANTLY SPECIFIED. LAST OCCURRENCE USED.
- , CAUSE
You specified the home group more than once on the command
line. The last home group specification is the one implemented
- , ACTION
This message is informational only
- 797, MESSAGE
LOCAL ATTRIBUTE REDUNDANTLY SPECIFIED. LAST OCCURRENCE
USED
- , CAUSE
You specified the local attribute more than once on the command
line. The last local attribute specification is the one implemented
- , ACTION
This message is informational only
- 798, MESSAGE
EXPECTED INTEGER BETWEEN -2,147,483,647 AND 2,147,483,647
- , CAUSE
You specified an integer that is not greater than -2147483647
or less than 2147483647
- , ACTION
Specfiy an integer within the accepted range
- 799, MESSAGE
EXPECTED ONE OF PH, DS, MR, PM, IA or BA
- , CAUSE
The command that you issued expected one of the following
capabilities: Process Handling (PH), Extra Data Segments (DS), Multiple RIN
(MR), Privileged Mode (PM), Interactive Access (IA), Batch Access (BA)
- , ACTION
Review the account structure capabilities in this manual, and
re-issue the command.
- 956, MESSAGE
THIS COMMAND REQUIRES SYSTEM MANAGER (SM) CAPABILITY
- , CAUSE
You must have System Manager (SM) capability to execute this
command
- , ACTION
See the System Manager
- 957, MESSAGE
THIS COMMAND REQUIRES ACCOUNT MANAGER (AM) CAPABILITY
- , CAUSE
You must have Account Manager (AM) capability to execute this
command
- , ACTION
See the Account Manager