|
|
Configuring Systems for Terminals, Printers, and Other Serial Devices: HP 3000 MPE/iX Computer Systems > Appendix A Using NMMGR in Maintenance ModeSUMMARYCONF |
|
Prints a summary report for one or more communications subsystems. SyntaxSUMMARYCONF subsystem[, subsystem[, ...]] Parameters
DescriptionSUMMARYCONF displays a summary report for a particular subsystem. This command is identical to the Print Summary function in the NMMGR Output Configuration screen. Output is directed to the file defined in the file equation FORMLIST. If FORMLIST is not defined, output is sent to $STDLIST. When you use SUMMARYCONF to print a summary report for the datacommunications and terminal subsystem (DTS), you can also specify a summary option to designate additional items in the DTS subsystem you wish to have reported. You do so in one of two ways. The first way is to enter the option on the same line as the command. For example: SUMMARYCONF DTS,LINK will cause a report to be generated for the DTS link configuration. You can use this method regardless of whether you entered maintenance mode from screen mode you are running a job to generate output. You can use the second way to specify a summary option for the DTS subsystem only if you have entered maintenance mode from screen mode. This method is to enter SUMMARYCONF DTS at the NMMGR maintenance mode prompt, with no option specified. A new prompt will appear, as follows: DTS Summary> You can enter the DTS print option at this prompt. If you do not want to generate any additional DTS reports, enter E[XIT] at the prompt. You will be returned to the maintenance mode prompt. The following DTS print summary options are available:
ExampleTo display the summary report for NETXPORT: NMMGR>SUMMARYCONF NETXPORT To display the summary report for profiles defined in the DTS subsystem: NMMGR>SUMMARYCONF DTS,PROFILE Or: NMMGR>SUMMARYCONF DTS DTS Summary>PROFILE |
|