R[ESET] SN[P]

Resets the specific X.25 card in a specific DTC.

Security level: 2.

Syntax

SN[P] dtcnum,cardnum

Parameters

dtcnum: Number of the DTC that contains the X.25 (SNP) card. This is the number TermDSM associates with this DTC.
cardnum: Number of the interface card within the DTC. The cards are numbered from zero beginning at the bottom of the DTC. (Note that SNP cards may not be mounted in slot 0 or 1 for DTC 16, and slot 0 for DTC 48.)

Description

When the subcommand is entered, the specified X.25 card is reset. All VCs on the X.25 card are reset (up to 256 VCs for DTC 48 and DTC 72MX, and up to 32 VCs for DTC 16).

After entering the DTC subcommand, the following is printed on the terminal:

     Warning: This will abort all users on this SNP. As many
     as 256 virtual circuit users could be affected. (TDSM 45)
     Do you want to continue (yes/no)?

If you answer no to this question, you will be returned to the reset prompt. If you answer yes, the reset continues.

R[ESET] SN[P]

Technical documentation

» Table of Contents

» Glossary

» Index

Syntax

Parameters

Description