R[ESET] PO[RT]

Clears the software associated with a particular port so that the associated device can be used again. Security level: 2.

PO[RT] dtcnum,cardnum,portnum

dtcnum: Number of the DTC to which the device is connected. This is the number TermDSM associates with this DTC.
cardnum: Number of the interface card within the DTC to which the device is connected. The cards are numbered from zero beginning at the bottom of the DTC as you face the back of the DTC.
portnum: Number of the port on the interface card. The ports are numbered from zero beginning at the left of the board as you face the back of the DTC.

This subcommand resets the ldev number that is currently associated with the port. It also aborts any session or job that is running on the port.

When it is complete, the reset prompt will be displayed and you can then enter another RESET subcommand.

Technical documentation