DU[MP] V[C]

Captures data pertaining to a particular VC on an X.25 card and writes it to a disk file. (If the VC you are attempting to dump is a PAD VC, you must use the Ldev option instead.)

Security level: 2.

Syntax

V[C] dtcnum,cardnum,vcnum

Parameters

dtcnum: Number of the DTC that contains the SNP (X.25) card. This is the number TermDSM associates with this DTC.
cardnum: Number of the X.25 card within the DTC. The cards are numbered from zero beginning at the bottom of the DTC. (Note that SNP cards may not be mounted in slot 0 or 1 for DTC 16, and slot 0 for DTC 48.)
vcnum: Number of the VC on the X.25 card. (PAD VCs must be dumped using the Ldev option.)

Description

Information associated with the VC on the X.25 card is dumped to a disk file.




	NOTE: Dumping information pertaining to a VC does not reset (or otherwise affect) the associated device. If you need to reset the VC, use the RESET command.

When the dump is complete, the following information will be displayed:

Please deliver the following VC dump to your HP representative.

Vxxxxxxa.PUB.SYS

where b is the board number in that DTC, xxxxx is the last 5 characters of the IEEE 802.3 address of that DTC and a is a character in the sequence a, b, ...,z to allow multiple dumps.

DU[MP] V[C]

Technical documentation

» Table of Contents

» Glossary

» Index

Syntax

Parameters

Description