DT[C]

Description

When this command is entered, information similar to the following is displayed on the terminal:

Your system has these Datacommunications Terminal Controllers:     DTC         Network           Name    Number       Address     -----       --------          ----      1        08000900180A     BIOLAB      2        080009000808     MARKETING      3        080009001234     TIMESHAREROOM      ^Use this number as the "DTC number" in TermDSM commands.

The DTC Node Name that was associated with each DTC at configuration time is displayed along with the IEEE 802.3 station address of each DTC. The number in the first column is assigned by TermDSM and these numbers must be used in other TermDSM commands to reference particular DTCs.

After the above display is printed, the major prompt will be printed and you may enter another TermDSM command.

If, during a TermDSM command, you make an error in specifying a DTC number, the above display is automatically printed to the terminal for your convenience.

	NOTE: The listing of DTCs with an IEEE 802.3 station address and name is not a guarantee that each DTC exists, is installed, is powered on, or is otherwise functional. This information is obtained from the NMCONFIG.PUB.SYS file and is therefore only a reflection of what has been configured (correctly or otherwise).