You can display status information about your SNA LU-LU session while
you are running Pass Thru. Configure the STATUS softkey in your PTCONFIG file, as shown in Chapter 2 “Configuring Pass Thru” and in Appendix D “Sample PTCONFIG File”
Once your STATUS softkey is configured, you can press it while
running Pass Thru, and status information will appear on your terminal's screen.
Here is an example of the type of information that might appear
on your screen:
S N A S E S S I O N S T A T U S I N F O R M A T I O N
SNA NODE PU3000E NAU NAME LU0004
SNA CLASS IMFCLASS NAU NUMBER 4
HOST LU NAME LU30004E
SESSION TYPE UNOWNED HP LOGICAL DEVICE NUMBER 32
SEGMENTS RECEIVED SINCE LAST INQUIRY 0
SEGMENTS SENT SINCE LAST STATUS INQUIRY 0
Press The ENTER Key To Refresh Previous Screen |
The STATUS display has the following fields:
- SNA NODE:
The configured SNA node name you are using to communicate
with the IBM host.
- SNA CLASS:
The configured SNA class name you are using in the HP
3000 network.
- HOST LU NAME:
The host LU name you are using in the HP 3000 network.
- SESSION TYPE:
Indicates whether you are in an LU-LU or unowned session.
- NAU NAME:
The NAU name you are using in the HP 3000 network.
- NAU NUMBER:
The NAU number you are using in the HP 3000 network.
- HP LOGICAL DEVICE NUMBER:
The logical device number you are using in the HP
3000 network.
- SEGMENTS RECEIVED SINCE LAST INQUIRY:
The number of packets received since the last status inquiry.
- SEGMENTS SENT SINCE LAST STATUS INQUIRY:
The number of packets transmitted since the last status
inquiry.