This section describes the AS/400 configuration parameters that must
be specified in order for the AS/400 to communicate with an HP 3000
on a token ring network.
Display Line Description |
 |
This portion of the AS/400 configuration describes the connection
between the AS/400 and the HP 3000.
- MAXFRAME
(Maximum frame size) Must match the MAX DATA
value configured on the HP 3000 SNA Node Configuration:
PU Data screen.
- ADPTADR
(TRLAN local adapter address) Must match the Remote
Station Address value configured on the HP 3000 SNA Node
Configuration: Token Ring Link Data screen.
- SSAP
(TRLAN source service access points) Contains all source service
access points available for this token ring line description.
Display Controller Description |
|
This portion of the AS/400 configuration describes each HP 3000 as a
node in the token ring network.
- EXCHID
(Exchange identifier) Must match the ID BLK
and ID
NUM values configured on the HP 3000 SNA Node
Configuration: PU Data screen.
- DSAP
(TRLAN DSAP) Must match the Local SSAP value
configured on the HP 3000 SNA Node Configuration:
Token Ring Link Data screen.
- SSAP
(TRLAN source service access point) Must match the Remote
DSAP value configured on the HP 3000 SNA Node
Configuration: Token Ring Link Data screen.
- ADPTADR
(TRLAN remote adapter address) Must match the Local
Station Address value configured on the HP 3000 SNA Node
Configuration: Token Ring Link Data screen. Obtain this value from
the HP 3000 system administrator.
- RMTCPNAME
(Remote control point name) Must match the Local Control
Point Name on the HP 3000 SNA Node Configuration: PU Data
screen in an APPN environment.
Figure 6-3 Title not available (Display Controller Description)
![[HP Desk Resident User Worksheet]](img/workdesk.gif)
![[IBM SNA/DS Resident User Worksheet]](img/snadsws.gif)