HP SNADS/iX Examples

Configuration of HP Desk Resident Users

Figure E-1 shows an example of the HP SNADS/iX configuration worksheet for HP Desk resident users.

The fields correspond to the numbers on the worksheet. Fields 1, 2, and 3 should be completed by the HP SNADS/iX gateway administrator. Fields 4, 5, and 6 should be completed by the IBM system programmer.

Figure E-1 Example SNADS Config. Worksheet for Desk Users

To connect to HP SNADS/iX, one routing table entry needs to be defined. An REN.RGN should be chosen to represent the HP SNADS/iX gateway. For example, if this REN.RGN is HPGATE.HP, the following entry should be added.

   ADD RGN=HP, 
       REN=HPGATE, 
       SSL=*, 
       QUEUE=LDSP, 
       TRANSID=DSVE

The REN.RGN, HPGATE.HP, will need to be configured on the HP SNADS/iX gateway once the product is installed.

In addition, an entry for every HP Desk user needs to be defined in the directory (HUP). For example, a user whose DGN.DEN is ADAMS.HPLAB will need the following directory definition:

   ADD USERTYPE=REMOTE, 
       DDN=HPLAB, 
       SA=ADAMS, 
       RGN=HPGATE, 
       REN=HP

	NOTE: Asterisks (*) are recommended here for the DDN and SA to aid in configuring the HP Desk users.

Configuration of SNA/DS Resident Users

Figure E-2 shows an example of the HP SNADS/iX configuration worksheet for IBM SNA/DS resident users.

The fields correspond to the numbers on the worksheet. Fields 1, 2, and 3 should be completed by the IBM system programmer. Field 4 should be completed by the HP SNADS/iX gateway administrator.

Figure E-2 Example SNADS Config. Worksheet for IBM Users