 |
» |
|
|
|
- 1
- Message
Warning -- This program cannot install the products listed below. (INSTWARN #1) - Action
The SUBSYS tape has non-AUTOINSTallable products.
Install all of these products after updating with the CSLT created
by the installer.
- 2
- Message
Expected a YES or NO. (INSTWARN #2) - Action
The input to the prompt is invalid. Respond YES
or NO at the prompt.
- 3
- Message
Warning -- The following data communication products may require I/O configuration changes. However, this will not affect the software installation of these products. (INSTWARN #3) - Action
Data communication products exist on the system
that may require changes to the system configuration. Consult the
appropriate reference manual for that product after installation
of the product is complete.
- 4
- Message
Invalid input (INSTWARN #4) - Action
Enter the appropriate number in response to the
prompt.
- 5
- Message
Warning -- The installer cannot find enough contiguous disk space on LDEV #1 for UPDATE to update with the CSLT created by the installer. (INSTWARN #5) - Action
Store files to tape, and then purge them. If you
have trouble creating this disk space, please contact the Response
Center. They can help you identify files with extents on LDEV1.
- 6
- Message
Version mismatch with the old HPINSTFL in the local group. (INSTWARN #6) - Cause
An old HPINSTFL was found and deleted. The installer
continues. - Action
No corrective action is required.
- 7
- Message
Corrupt HPINSTFL file (INSTWARN #7) - Cause
A non-ASCII HPINSTFL file was found and purged.
The installer continues. - Action
No corrective action is required.
- 8
- Message
Unable to close CD-ROM volume volume name (INSTWARN #8) - Cause
VSCLOSE failed on a mounted CD-ROM volume. - Action
From the console, manually
VSCLOSE and dismount the volume. If the drive is a SCSI drive, run
AVRSCSI to dismount the volume. Follow the instructions on the screen to continue
with the installation.
- 9
- Message
The installer cannot verify that the second CD-ROM volume, volume name, is mounted on LDEV ldev. (INSTWARN #9) - Cause
The user pressed [[return]] at the continue prompt
before the second CD-ROM volume was mounted. - Action
Follow the instructions
on the screen and ensure the second volume has been mounted before
pressing [[return]] again to continue. Use DSTAT to verify that the second CD-ROM is mounted.
- 10
- Message
HPINSTAL is terminating on user's request. (INSTWARN #10) - Cause
The user entered QUIT at the prompt to continue
after switching the CD-ROM volumes. - Action
Mount the first CD-ROM volume
again and restart HPINSTAL. HPINSTAL may be started again from the beginning
or the current process may be resumed at the point of creating the
CSLT.
- 11
- Message
Could not restructure PATCHAUD (INSTWARN #11) - Cause
FCOPY of PATCHAUD to a fixed record format file
failed. - Action
If it is necessary to convert the PATCHAUD file
to fixed, ASCII then use the following commands: : FILE PAUD;REC=-80,,F,ASCII : FCOPY FROM=PATCHAUD;TO= PAUD;NEW;SUBSET Reply Y : PURGE PATCHAUD : RENAME PAUD,PATCHAUD |
- 20
- Message
Nonexistent product number. (INSTWARN #20) - Cause
A bad product number was entered. - Action
Reenter the correct product number.
- 21
- Message
Keyword incorrect. Retype your keyword. (INSTWARN #21) - Cause
An invalid keyword was entered. - Action
Ensure the key entered matches
the keyword certificate received from Hewlett-Packard. Ensure that the product list entered is correct. Run HPINSTAL again from the beginning. Contact the Response Center for further assistance
if required.
- 22
- Message
Exactly fourteen (14) characters must be entered. (INSTWARN #22) - Cause
An invalid keyword was entered. - Action
Ensure the key entered matches
the keyword certificate received from Hewlett-Packard. Ensure that the product list entered is correct. Run HPINSTAL again from the beginning. Contact the Response Center for further assistance
if required.
- 23
- 24
- Message
This product number is not part of the original list. (INSTWARN #24) - Cause
A product number was entered that does not appear
in the master product list, PRODLIST.PUB.SYS. - Action
Reenter the product number.
- 25
- Message
At least one encrypted password was found. You will be prompted for the password(s) that are encrypted. (INSTWARN #25) - Action
Some of the passwords needed by the I-files are
encrypted. You will be prompted by MPE/iX for the passwords when
the jobs are streamed.
|
