A-Class Server System Installation

“ A-Class Server Site Preparation ”. Contains environmental requirements for preparing the area where your server is to be located.

“Stand-Alone A-Class Server Unpack and Install Instructions ”. Details what you will find when you open the carton containing your A-Class server and how to set it up for stand-alone operation.

“Cabinet-Mounted A-Class Server System Unpack and Install ”. Tells you how to install and connect the server to external devices and power, either as a stand-alone unit or in an HP-supported cabinet. Unpacking, set up, and connection information is also included for those who ordered a cabinet from the factory with one or more servers installed,

“ A-Class Server System Software Configuration”. Tells you how to install memory (RAM), cache memory, embedded disk and I/O card add-on components.

“A-Class Server Power Up and Boot Procedures”. Leads you through the process for powering up external devices and the server, gives the software commands for customizing the A-Class Secure Web Console IP address, and lists the steps required for booting the server to an operating state.

“ A-Class Server System Software Configuration”. Directs you to the software commands necessary for preparing both the A-Class server and the A-Class Secure Web Server for operation.