Verifying the Installation

Issue the swlist command as follows:

# swlist iSCSI-00

If the HP-UX 11iv1 iSCSI Software Initiator is installed correctly, the generated output will look similar to this:

# Initializing...
 
# Contacting target "myhost"...
 
#
 
# Target:  myhost:/
 
#
 
 
# iSCSI-00               B.11.11.03e   HP-UX iSCSI Software Initiator
  iSCSI-00.ISCSI-SWD     B.11.11.03e   HP-UX iSCSI Software Initiator

If the HP-UX 11iv2 iSCSI Software Initiator is installed correctly, the generated output will look similar to this:

# Initializing...
 
# Contacting target "myhost"...
 
#
 
# Target:  myhost:/
 
#
 
 
# iSCSI-00                 B.11.23.03e   HP-UX iSCSI Software Initiator
 
  iSCSI-00.ISCSI-SWD        B.11.23.03e   HP-UX iSCSI Software Initiator

Issue the ioscan command as follows:

# ioscan -kfnC iscsi

If the software is installed correctly, the generated output will look similar to this:

Class     I  H/W Path  Driver   S/W State   H/W Type     Description
=====================================================================
iscsi     0  255/0     iscsi    CLAIMED     VIRTBUS      iSCSI Virtual Node

If the software is not installed correctly, see “Troubleshooting the iSCSI Software Initiator Installation”.