|
|
|
|
|
|
|
|
HP 9000 Systems: J2120B DTC Manager/UX Version A.14.4J.110 for HP-UX > Chapter 1 J2120B DTC Manager/UX Version A.14.4J.110
for HP-UX 11.11 Release Note
Compatibility and Installation Requirements |
|
To install DTC Manager/UX version A.14.4J.110 on your system, you must use the swinstall utility. The swinstall program allows you to select which components of the software you want to install (Runtime, Minimum Runtime, Manual Pages). It is recommended that all components be installed. Please refer to Using the HP DTC Manager/UX (J2120B-62000) and/or the man pages for swinstall. If you already had DTC Manager/UX installed on your system with a previous version of HP-UX, and have just upgraded your system to HP-UX 11.11, you must update the Manager/UX by installing the A.14.4J.110 version. To update the DTC Manager/UX to A.14.4J.110 version, use the swinstall utility. The update is supported from the following versions of DTC Manager/UX:
To migrate from one system to another, transfer the DTC configurations to the new HP-UX 11.11 system where DTC Manager/UX version A.14.4J.110 is already installed. Migration is supported from the following versions of the DTC Manager/UX on the source system:
To migrate the DTC configurations onto the target system running HP-UX 11.11:
Refer to Using the HP DTC Manager/UX (J2120B-62000) and/or the man pages for the dtcexport, dtcdisown, dtcimport and dtcown commands. The standard terminal 700/65 replaces the 700/96 Block-mode terminal as the supported/recommended console for the HP 9000. To use this terminal with the DTC Manager/UX, use VT100 or VT220 terminal emulation. Function keys are accessed by pressing the <Control> and <F> keys simultaneously, followed by the number of the function key (range: 1 to 8). For example, to access <F5>, press <Control + F> + <5>. |
|||||||||||||||||||||||||||||||||||||||||||||
|
||
|
|
|
|||||||||||||
|
|||||||||||||
