 |
» |
|
|
|
Section 4: File Formats
Table of Contents
- Introduction
- intro(4) - introduction to file formats
- Symbols
- .netrc(4) - login information for ftp, rexec, and rexec() - see netrc(4)
- .proto(4) - prototype job file for at and batch - see proto(4)
- .rhosts(4) - security files authorizing access by remote hosts and users on local host - see hosts.equiv(4)
- A
- a.out(4) - assembler and link editor output
- acct(4) - per-process accounting file format
- acps.conf(4) - configuration file for the Access Control Policy Switch (ACPS)
- ar(4) - common archive file format
- audeventstab(4) - define and describe audit system events
- audit(4) - file format and other information for auditing
- authcap(4) - security databases for trusted systems
- B
- bootconf(4) - boot device configuration table
- btmp(4) - utmp, wtmp, btmp entry format - see utmp(4)
- btmps(4) - user login information - see wtmps(4)
- C
- cdnode(4) - format of a CDFS cdnode
- cdrom(4) - CD-ROM background information
- charmap(4) - symbolic translation file for localedef scripts
- compartments(4) - HP-UX compartments files
- core(4) - format of core image file
- cpio(4) - format of cpio archive
- D
- d_passwd(4) - dialup security control - see dialups(4)
- default(4) - system default database file for a trusted system
- devassign(4) - device assignment database file for a trusted system
- dialups(4) - dialup security control
- dir(4) - format of directories on short-name HFS file systems
- disktab(4) - disk description file
- dlpi(4) - data link provider interface standard header file
- dlpi_drv(4) - definitions of interfaces for device drivers to interact with DLPI
- dlpi_drv.h(4) - definitions of interfaces for device drivers to interact with DLPI - see dlpi_drv(4)
- dlpi_ext(4) - HP-specific extensions for DLPI
- dlpi_ext.h(4) - HP-specific extensions for DLPI - see dlpi_ext(4)
- dlpi.h(4) - data link provider interface standard header file - see dlpi(4)
- DOSIF(4) - DOS Interchange Format description - see dosif(4)
- dosif(4) - DOS Interchange Format description
- dp(4) - dedicated ports file used by DDFA software and Telnet port identification feature
- E
- efi(4) - Extensible Firmware Interface description
- exports(4) - directories to export to NFS clients
- F
- fs_vxfs(4) - format of a VxFS file system volume
- fspec(4) - format specification in text files
- fstab(4) - static information about the file systems
- ftpaccess(4) - ftpd configuration file
- ftpconversions(4) - ftpd conversions database
- ftpgroups(4) - group password file for use with the SITE GROUP and SITE GPASS commands.
- ftphosts(4) - ftpd individual user host access file
- ftpservers(4) - ftpd virtual hosting configuration specification file
- ftpusers(4) - security file for ftpd
- G
- gated-confi(4) - GateDaemon configuration guide - see gated.conf(4)
- gated.conf(4) - GateDaemon configuration guide
- gated.config(4) - GateDaemon configuration guide - see gated.conf(4)
- gettydefs(4) - speed and terminal settings used by getty
- group(4) - group file, grp.h
- H
- hosts(4) - host name data base
- hosts.equiv(4) - security files authorizing access by remote hosts and users on local host
- I
- inetd.conf(4) - configuration file for inetd
- inetd.sec(4) - optional security file for inetd
- inetsvcs.conf(4) - configuration file for secure internet services
- info(4) - diskless client configuration information file
- inittab(4) - script for the boot init process
- inode_vxfs(4) - format of a VxFS file system inode
- ioconfig(4) - ioconfig entry format
- issue(4) - issue identification file
- K
- krb5.conf(4) - Kerberos configuration file
- L
- ldapclientd.conf(4) - configuration file for the LDAP client daemon process
- libgss(4) - shared library for GSSAPI (Generic Security Service Application Programming Interface)
- lif(4) - logical interchange format description
- localedef(4) - format and semantics of locale definition file
- logingroup(4) - group file, grp.h - see group(4)
- lvmpvg(4) - LVM physical volume group information file
- M
- magic(4) - magic numbers for HP-UX implementations
- mnttab(4) - mounted file system table
- model(4) - HP-UX machine identification
- N
- named.conf(4) - configuration file for NameDaemon
- netconfig(4) - network configuration database
- netgroup(4) - list of network groups
- netrc(4) - login information for ftp, rexec, and rexec()
- nettlgen.conf(4) - network tracing/logging and kernel logging configuration file
- networks(4) - network name data base
- nisfiles(4) - NIS+ database files and directory structure
- nlist(4) - nlist and nlist64 structure formats
- nlist_ia(4) - structure formats for Integrity systems
- nlist_pa(4) - structure formats for PA-RISC systems
- nlist64(4) - nlist and nlist64 structure formats - see nlist(4)
- nlist64_ia(4) - structure formats for Integrity systems - see nlist_ia(4)
- nlist64_pa(4) - structure formats for PA-RISC systems - see nlist_pa(4)
- nlspath(4) - NLSPATH configuration file
- nsswitch.conf(4) - configuration file for the name service switch
- P
- pam.conf(4) - configuration file for pluggable authentication modules
- pam_user.conf(4) - users configuration file for pluggable authentication modules
- passwd(4) - password file
- pcf(4) - port configuration file used by DDFA software
- pfs(4) - portable file system
- PPP.AUTH(4) - PPP authentication file format - see ppp.Auth(4)
- ppp.Auth(4) - PPP authentication file format
- ppp.auth(4) - PPP authentication file format - see ppp.Auth(4)
- PPP.DEVICES(4) - PPP physical device description file format - see ppp.Devices(4)
- ppp.Devices(4) - PPP physical device description file format
- ppp.devices(4) - PPP physical device description file format - see ppp.Devices(4)
- PPP.DIALERS(4) - PPP dialer description file format - see ppp.Dialers(4)
- ppp.Dialers(4) - PPP dialer description file format
- ppp.dialers(4) - PPP dialer description file format - see ppp.Dialers(4)
- PPP.FILTER(4) - PPP packet filter specification file format - see ppp.Filter(4)
- ppp.Filter(4) - PPP packet filter specification file format
- ppp.filter(4) - PPP packet filter specification file format - see ppp.Filter(4)
- PPP.KEYS(4) - PPP encryption keys file format - see ppp.Keys(4)
- ppp.Keys(4) - PPP encryption keys file format
- ppp.keys(4) - PPP encryption keys file format - see ppp.Keys(4)
- PPP.SYSTEMS(4) - PPP neighboring systems description file format - see ppp.Systems(4)
- ppp.Systems(4) - PPP neighboring systems description file format
- ppp.systems(4) - PPP neighboring systems description file format - see ppp.Systems(4)
- pppoec.conf(4) - PPPoE (Point to Point Protocol over Ethernet) client configuration file
- pppoerd.conf(4) - PPPoE (Point to Point Protocol over Ethernet) relay configuration file
- pppoesd.conf(4) - PPPoE (Point to Point Protocol over Ethernet) server configuration file
- privgrp(4) - format of privileged values
- profile(4) - set up user's environment at login time
- proto(4) - prototype job file for at and batch
- protocols(4) - protocol name database
- prpwd(4) - protected password authentication database files used for trusted systems
- publickey(4) - public key database
- Q
- queuedefs(4) - queue description file for at, batch, and crontab
- R
- rc.config(4) - files containing system configuration information
- rc.config.d(4) - files containing system configuration information - see rc.config(4)
- rcsfile(4) - format of RCS files
- resolv.conf(4) - resolver configuration file - see resolver(4)
- resolver(4) - resolver configuration file
- rhosts(4) - security files authorizing access by remote hosts and users on local host - see hosts.equiv(4)
- rmtab(4) - local file system mount statistics
- rndc.conf(4) - rndc configuration file
- rpc(4) - rpc program number data base
- rtradvd.conf(4) - configuration file for router advertisement daemon
- S
- sccsfile(4) - format of SCCS file
- sd(4) - all objects that Software Distributor (SD) uses, their attributes and storage formats
- securenets(4) - NIS map security file
- security(4) - security defaults configuration file
- services(4) - service name data base
- services.window(4) - file containing applications and their associated memory window id
- shadow(4) - shadow password file
- shells(4) - list of allowed login shells
- slp.conf(4) - Configuration file for SLP Agents
- slp.reg(4) - SLP static registration file
- sm(4) - statd directory and file structures
- sm.bak(4) - statd directory and file structures - see sm(4)
- snmpd.conf(4) - configuration file for the SNMP agent
- softkeys(4) - keysh softkey file format
- state(4) - statd directory and file structures - see sm(4)
- switch(4) - configuration file for the name service switch - see nsswitch.conf(4)
- swpackage(4) - product specification file (PSF) format
- symlink(4) - symbolic link
- system(4) - system description configuration files
- T
- tar(4) - format of tar tape archive
- tcpd.conf(4) - configuration file for tcpd
- TERM(4) - terminal capabilities - see term_c(4)
- term(4) - format of compiled term file
- term_c(4) - terminal capabilities
- term.h(4) - terminal capabilities - see term_c(4)
- terminfo(4) - printer, terminal, and modem capability database
- ttys(4) - terminal control database file, for trusted systems
- ttytype(4) - data base of terminal types by port
- tunefstab(4) - VxFS file system tuning parameters table
- tztab(4) - time zone adjustment table for date and ctime()
- U
- ups_conf(4) - HP PowerTrust Uninterruptible Power System (UPS) monitor configuration file
- userdb(4) - user database, storing per-user information
- usermod(4) - list of home directory names in /etc/default/usermod
- utmp(4) - utmp, wtmp, btmp entry format
- utmps(4) - user-accounting database
- utmpx(4) - utmpx database storage file
- uuencode(4) - format of an encoded uuencode file
- W
- wtmp(4) - utmp, wtmp, btmp entry format - see utmp(4)
- wtmps(4) - user login information
- X
- xtab(4) - directories to export to NFS clients - see exports(4)
- Y
- ypfiles(4) - Network Information Service database and directory structure
|
