|
|
HP-UX Reference > Mmrinfo(1M)HP-UX 11i Version 2: December 2007 Update |
|
NAMEmrinfo — Multicast Routing Configuration Information Tool DESCRIPTIONmrinfo requests the configuration information from the multicast-ourter, and prints the information to the standard out. multicast-router can be either an IP address or a system name. mrinfo sends out the ASK_NEIGHBORS igmp message to the specified multicast-router, when the router receives the request, it sends back its configuration information. If the multicast-router is not specified, the request is sent the local router. The the configuration information for each interface is printed in the following format: interface_addr -> neighbor_addr (neighbor_name) [metrics/thresh/flags] If there are multiple neighbor routers on one interface, they will all be reported on the output. The possible values for flag are:
Please see mrouted(1M) for metrics and thresh. The command line options are:
EXAMPLEThe following is an example of quering the multicasting configuration from the local routing daemon. mrinfo 127.0.0.1 (localhost) [version 3.3]: 15.13.106.144 -> 15.13.106.145 (hpntcbs.cup.hp.com) [10/1/querier] 193.2.1.39 -> 0.0.0.0 (all-zeros-broadcast) [1/1/disabled] 15.13.106.144 -> 15.255.176.33 (matmos.hpl.hp.com) [10/1/tunnel] 15.13.106.144 -> 15.17.20.7 (hpspddc.vid.hp.com) [10/1/tunnel/down] |
|