pd_att_log_ptr(5)

|------------------------------------------------------------------------| | Settable Attribute Listing | Specifiable Attribute Listing | |------------------------------------|-----------------------------------| | associated-queue | printer-realization | | authorize-jobs | | | character-sets-supported | | | content-orientations-supported | | | descriptor | | | document-attributes-supported | | | document-formats-supported | | | document-types-supported | | | end-messages-supported | | | fonts-supported | | | input-trays-supported | | | interface-program-methods- | | | supported | | | job-attributes-supported | | | job-finishings-supported | | | job-sheets-supported | | | job-size-range-supported | | | list-of-managers | | | maximum-copies-supported | | | media-supported | | | message | | | notification-profile | | | numbers-up-supported | | | page-select-supported | | | pd-gway-foreign-host | | | pd-gway-foreign-printer | | | plexes-supported | | | print-qualities-supported | | | printer-resolutions-supported | | | printer-initial-value-document | | | printer-initial-value-job | | | printer-locations | | | printer-model | | | printer-mopy-supported | | | sides-supported | | | start-message-supported | | |------------------------------------------------------------------------| |------------------------------------------------------------------------| | Table 1-1. Logical Printer Attributes | |------------------------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | associated-queue | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the queue associated with this printer. All | | | jobs submitted to this logical printer will be sent to | | | the queue specified by this attribute. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | A text string up to 255 characters that contains this | | | global ID of the queue. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | | | Guidelines | | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | associated-server | |------------|-----------------------------------------------------------| | Type | Non Settable | |------------|-----------------------------------------------------------| | Explanation| Indicates the name of the spooler in which this printer | | | resides. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | A text string up to 255 characters that contains the name | | | of the server. Set from the argument | | | (ServerName:PrinterName) of the pdcreate command when | | | this logical printer was created. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | | | Guidelines | | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | authorize-jobs | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies if the person submitting the job is required | | | to be authorized to submit a job to this logical printer. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | One of the following fixed values: | | | | | | Fixed Value Input Synonym | | | true yes | | | false no | |------------|-----------------------------------------------------------| | Default | false | |------------|-----------------------------------------------------------| | Usage | o When the spooler security level is medium the | | Guidelines | following rules apply when the value for this | | | attribute is: | | | True The login ID of the job submitter is used | | | to check if the person has "read" authority | | | on this printer. If the person does have | | | "read" authority, the job is authorized. | | | False The job is automatically authorized. | | | | | | Note: Security level of medium is the only supported | | | level. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | character-sets-supported | |------------|-----------------------------------------------------------| | Type | Settable with pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the character set encodings supported by this | | | printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | Any of the following fixed values: | | | | | | iso-ucs-2-level2 | | | other | | | ascii | | | iso-latin1 | | | iso-latin2 | | | iso-latin3 | | | iso-latin4 | | | iso-latin-cyrillic | | | iso-latin-arabic | | | iso-latin-greek | | | iso-latin-hebrew | | | iso-latin5 | | | iso-latin6 | | | iso-text-communication | | | half-width-katakana | | | jis-encoding | | | shift-jis | | | euc-packed-format-japanese | | | euc-fixed-width-japanese | | | iso-reg4-united-kingdom | | | iso-reg11-swedish-for-names | | | iso-reg15-italian | | | iso-reg17-spanish | | | iso-reg21-german | | | iso-reg60-danish-norwegian | | | iso-reg69-french | | | unicode | | | ucs4 | | | unicode-ascii | | | unicode-latin1 | | | unicode-ibm-2039 | | | unicode-ibm-1261 | | | unicode-ibm-1268 | | | unicode-ibm-1276 | | | unicode-ibm-1264 | | | unicode-ibm-1265 | | | windows30-latin1 | | | windows31-latin1 | | | windows31-latin2 | | | windows31-latin5 | | | hp-roman8 | | | adobe-standard-encoding | | | ventura-us | | | ventura-international | | | dec-mcs | | | pc-page-850-multilingual | | | pc-page-852-latin2 | | | pc8-page-437-us | | | pc8-danish-norwegian | | | pc-page-862-latin-hebrew | | | pc8-turkish | | | ibm-symbols | | | ibm-thai | | | hp-legal | | | hp-pifont | | | hp-math8 | | | hp-ps-math | | | hp-desktop | | | ventura-math | | | microsoft-publishing | | | windows31j | | | gb-2312 | | | big5 | | | cns | | | ksc-5601 | | | ccdc | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o The document attribute default-character-set is | | Guidelines | compared to this attribute for scheduling and | | | validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | content-orientations-supported | |------------|-----------------------------------------------------------| | Input | orientations-supported | | Synonym | | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the page presentations supported by this | | | logical printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | Any of the following fixed values: | | | | | | landscape | | | portrait | | | reverse-portrait | | | reverse-landscape | |------------|-----------------------------------------------------------| | Default | No value. | |------------|-----------------------------------------------------------| | Usage | o The document attribute content-orientation is | | Guidelines | compared to this attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | descriptor | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| A textual description of this logical printer. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | A text string up to 4095 characters that contains a | | | description of this logical printer. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | | | Guidelines | | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | document-attributes-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the document attributes supported by this | | | logical printer. This attribute is checked during | | | validation to allow jobs whose documents have these | | | attributes to be sent to this logical printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | Any valid document attributes listed in | | | pd_att_document(5). | |------------|-----------------------------------------------------------| | Default | No default | |------------|-----------------------------------------------------------| | Usage | | | Guidelines | | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | document-formats-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the document formats supported by this logical | | | printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | Any of the following fixed values: | | | | | | Fixed Value Input Synonym | | | ascii | | | pcl hppcl | | | hp-pcl | | | hpgl hp-gl | | | pjl | | | postscript ps | | | ipds | | | ppds | | | escapep | | | epson | | | ddif | | | interpress | | | iso-6429 | | | line-data | | | modca | | | regis | | | scs | | | spdl | | | tek4014 | | | pds | | | igp | | | codev | | | dsc-dse | | | wps | | | ln03 | | | ccitt | | | quic | | | cpap | | | dec-ppl | | | simple-text | | | npap | | | doc | | | impress | | | pinwriter | | | npdl | | | nec201pl | | | automatic | | | pages | | | lips | | | tiff | | | diagnostic | | | capsl | | | excl | | | lcds | | | xes | | | passthru | |------------|-----------------------------------------------------------| | Default | No values. | |------------|-----------------------------------------------------------| | Usage | o The document attribute document-format is compared to | | Guidelines | this attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | document-types-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the types of documents that are supported by | | | this logical printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | Any of the following fixed values: | | | | | | file-reference | | | printable | |------------|-----------------------------------------------------------| | Default | No values. | |------------|-----------------------------------------------------------| | Usage | o The document attribute document-type is compared to | | Guidelines | this attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | enabled | |------------|-----------------------------------------------------------| | Type | Non Settable | |------------|-----------------------------------------------------------| | Explanation| Indicates if this logical printer is enabled and can | | | accept print jobs. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | One of the following fixed values: | | | | | | Fixed Value Input Synonym | | | true yes | | | false no | | | | | | Implicitly set and reset by the pdenable and pddisable | | | commands. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Default | false | |------------|-----------------------------------------------------------| | Usage | | | Guidelines | | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | end-message-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Indicates whether jobs submitted to this logical printer | | | can specify an end message. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | One of the following fixed values: | | | | | | Fixed Value Input Synonym | | | true yes | | | false no | |------------|-----------------------------------------------------------| | Default | No value. | |------------|-----------------------------------------------------------| | Usage | o The job attribute job-end-message is compared to this | | Guidelines | attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | fonts-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands, or the | | | printer attribute file. | |------------|-----------------------------------------------------------| | Usage | | |------------|-----------------------------------------------------------| | Explanation| Identifies the fonts supported by this printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values | |------------|-----------------------------------------------------------| | Values | Any text string that contains the font names supported by | | | this printer. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o The document attribute default-font is compared to | | Guidelines | this attribute for scheduling and validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Name | input-trays-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Specifies the types of input trays that are supported by | | | this logical printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | A text string of up to 255 characters that describes the | | | input tray, or one of the following fixed values: | | | | | | top | | | middle | | | bottom | | | envelope | | | manual | | | large-capacity | | | main | | | side | |------------|-----------------------------------------------------------| | Default | No value. | |------------|-----------------------------------------------------------| | Usage | o The document attribute input-tray-select and | | Guidelines | default-input-tray are compared to this attribute | | | for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | interface-program-methods-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate, pdset commands, or printer | | | attribute file. | |------------|-----------------------------------------------------------| | Explanation| Identifies the interface program invocation methods | | | supported by this printer. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | Any of the following fixed values: | | | | | | hpdps | | | lp | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o The job attribute interface-program-method is compared| | Guidelines | to this attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | job-attributes-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the job attributes supported by this printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | Any valid job attributes listed in pd_att_job(5). | |------------|-----------------------------------------------------------| | Default | No value. | |------------|-----------------------------------------------------------| | Usage | | | Guidelines | | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | job-finishings-supported | |------------|-----------------------------------------------------------| | Type | Settable | |------------|-----------------------------------------------------------| | Explanation| Indicates the finishing method supported by this printer. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | staple | | | top-left-staple | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | To verify if a printer is capable of performing a | | Guidelines | finishing process on a print job. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | job-sheets-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the auxiliary-sheet-package values supported | | | this printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | Any of the following fixed values: | | | | | | none | | | job-separators | | | job-set-start | | | job-set-end | | | job-set-wrap | | | job-set-start-copies-separate | | | job-set-end-copies-separate | | | job-set-wrap-copies-separate | | | job-copy-start | | | job-copy-end | | | job-copy-wrap | |------------|-----------------------------------------------------------| | Default | No value. | |------------|-----------------------------------------------------------| | Usage | o The job attribute job-sheets is compared to this | | Guidelines | attribute for validation. | | | o The auxiliary-sheet-package object is not implemented.| | | These values are used to select the auxiliary sheets. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | job-size-range-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Defines the range of job sizes (in bytes) the printer can | | | accept. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | This is a complex attribute with the following | | | components: | | | | | | lower limit | | | upper limit | |------------|-----------------------------------------------------------| | Syntax | Two integers separated by a colon; the value of the | | | integers can be from 0 to 9223372036854775800 | | | | | | lower limit:upper limit | | | | | | For example: 0:1000000000 | |------------|-----------------------------------------------------------| | Usage | o The job attribute total-job-octets is compared to | | Guidelines | this attribute for validation. | |------------|-----------------------------------------------------------| | Component | Description | |------------|-----------------------------------------------------------| | lower | Explanation: Provides the lower limit of the job size | | limit | range. | | | Value Type: Single value. | | | Values: | | | o The unit is octets (bytes). | | | o The first integer identifies the lower limit and | | | must be less than or equal to the second integer | | | (the upper limit). | | | o If only the lower limit is supplied, the upper | | | limit defaults to 9223372036854775800 | | | Default: No value. | |------------|-----------------------------------------------------------| | upper | Explanation: Provides the lower limit of the job size | | limit | range. | | | Value Type: Single value. | | | Values: | | | o The unit is octets (bytes). | | | o The first integer identifies the lower limit and | | | must be less than or equal to the second integer | | | (the upper limit). | | | o If only the upper limit is supplied, the lower | | | limit defaults to 0. | | | Default: No value. | |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | list-of-managers | |------------|-----------------------------------------------------------| | Input | managers | | Synonym | | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset command. | |------------|-----------------------------------------------------------| | Explanation| Identifies the people responsible for the maintenance and | | | operation of this logical printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | A text string up to 255 characters per person that | | | contains the name or user ID of the person responsible | | | for this logical printer. | |------------|-----------------------------------------------------------| | Default | No values. | |------------|-----------------------------------------------------------| | Usage | | | Guidelines | | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | maximum-copies-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset | |------------|-----------------------------------------------------------| | Explanation| Indicates the number of document copies, in a single | | | print job, allowed by this logical printer. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | An integer from 1 to 2147483647. | |------------|-----------------------------------------------------------| | Default | No value. | |------------|-----------------------------------------------------------| | Usage | o If this attribute value is blank, there is no limit | | Guidelines | to the number of document copies. | | | o The document attribute copy-count is compared to this | | | attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | media-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset | |------------|-----------------------------------------------------------| | Explanation| Identifies the types of media supported by this logical | | | printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | A text string up to 255 characters per item that contains | | | a unique name or any of the following fixed values: | | | | | | iso-a4-white | | | iso-a4-colored | | | iso-a4-transparent | | | iso-a3-white | | | iso-a3-colored | | | iso-a5-white | | | iso-a5-colored | | | iso-b4-white | | | iso-b4-colored | | | iso-b5-white | | | iso-b5-colored | | | na-letter-white | | | na-letter-colored | | | na-letter-transparent | | | na-legal-white | | | na-legal-colored | | | iso-b5-envelope | | | iso-b4-envelope | | | iso-c4-envelope | | | iso-c5-envelope | | | designated-long-envelope | | | na-10x13-envelope | | | na-9x12-envelope | | | monarch-envelope | | | na-number-10-envelope | | | na-7x9-envelope | | | na-9x11-envelope | | | na-10x14-envelope | | | na-number-9-envelope | | | na-6x9-envelope | | | na-10x15-envelope | | | jis-b4-white | | | jis-b4-colored | | | jis-b5-white | | | jis-b5-colored | | | executive | | | folio | | | invoice | | | ledger | | | quarto | | | iso-a0-white | | | iso-a1-white | | | iso-a2-white | | | iso-a6-white | | | iso-a7-white | | | iso-a8-white | | | iso-a9-white | | | iso-a10-white | | | iso-b10-white | | | iso-b0-white | | | iso-b1-white | | | iso-b2-white | | | iso-b3-white | | | iso-b6-white | | | iso-b7-white | | | iso-b8-white | | | iso-b9-white | | | iso-b10-white | | | jis-b0-white | | | jis-b1-white | | | jis-b2-white | | | jis-b3-white | | | jis-b6-white | | | jis-b7-white | | | jis-b8-white | | | jis-b9-white | | | jis-b10-white | | | a | | | b | | | c | | | d | | | e | |------------|-----------------------------------------------------------| | Default | No value. | |------------|-----------------------------------------------------------| | Usage | o The document attribute default-medium is compared to | | Guidelines | this attribute. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | message | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset command. | |------------|-----------------------------------------------------------| | Explanation| Information associated with this logical printer. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | A text string up to 4095 characters that contains | | | information about this logical printer. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | | | Guidelines | | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | notification-profile | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset command. | |------------|-----------------------------------------------------------| | Explanation| Designates which persons are to be notified of specific | | | events related to this logical printer, and how they are | | | to be notified. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | This is a complex attribute, which has the following | | | components: | | | | | | o event-identifiers | | | o delivery-method | | | o event-comment | | | o delivery-address | | | o locale | |------------|-----------------------------------------------------------| | Syntax | -x "notification-profile={event-identifiers=value | | | delivery-method=value event-comment='text' | | | delivery-address=value locale=value}" | | | | | | For example: | | | | | | -x "notification-profile={event-identifiers= | | | class-physical-printer-status | | | delivery-method=electronic-mail | | | event-comment='Its still going' | | | delivery-address=jeff@ttank | | | locale=C}" | |------------|-----------------------------------------------------------| | Component | Description | |------------|-----------------------------------------------------------| | event- | Explanation: Specifies which events the person is to | | identifiers| receive messages about. | | | Value Type: Multiple values. | | | Values: Any of the values listed for spooler attribute | | | events-supported in pd_att_spooler(5). | | | Default: | | | o object-deleted | | | o object-cleaned | |------------|-----------------------------------------------------------| | delivery- | Explanation: Specifies how the person is to receive | | method | event messages. | | | Value Type: Single value. | | | Values: One of the following fixed values: | | | Fixed Value Input Synonym | | | electronic-mail e-mail, email | | | message | | | none | | | Default: electronic-mail | |------------|-----------------------------------------------------------| | event- | Explanation: A text string that provides a comment | | comment | that is appended to the event message. | | | Value Type: Single value. | | | Values: A text string up to 4095 characters that | | | contains the comment. | | | Default: No value. | |------------|-----------------------------------------------------------| | delivery- | Explanation: The address of the person that is to | | address | receive event messages. | | | Value Type: Single value. | | | Values: The name and node of the person that is to | | | receive messages concerning the operation of this | | | logical printer. | | | Default: The login of the user that created this | | | logical printer with the pdcreate command. | |------------|-----------------------------------------------------------| | locale | Explanation: Defines the locale of the person to | | | receive the messages. The locale is used to | | | determine the language that the messages are | | | transmitted in. | | | Value Type: Single value. | | | Values: The locale identification. | | | Default: The locale of the person that created this | | | logical printer with the pdcreate command. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | numbers-up-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the number-up values supported by this printer.| | | See the explanation of document attribute number-up in | | | pd_att_document(5) for more information on number-up | | | values. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | Any of the following fixed values: | | | | | | 0 | | | 1 | | | 2 | | | 4 | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o The document attribute number-up is compared to this | | Guidelines | attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | object-class | |------------|-----------------------------------------------------------| | Type | Non Settable. | |------------|-----------------------------------------------------------| | Explanation| Identifies the object class to which this object belongs. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | The value of this attribute must be printer. | |------------|-----------------------------------------------------------| | Default | printer | |------------|-----------------------------------------------------------| | Usage | | | Guidelines | | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | output-bins-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands, or by the | | | printer attribute file. | |------------|-----------------------------------------------------------| | Usage | Values vary by printer model. | |------------|-----------------------------------------------------------| | Explanation| Identifies the output bins supported by this printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | A text string of up to 255 characters that describes the | | | output bin, or any of the following fixed values: | | | | | | top | | | middle | | | bottom | | | side | | | left | | | right | | | face-up | | | face-down | | | large | | | private | | | collator | | | | |------------|-----------------------------------------------------------| | Default | No default | |------------|-----------------------------------------------------------| | Usage | o The job attribute results-profile component output-bin| | Guidelines | is compared to this attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | page-select-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands, or by the | | | printer attribute file. | |------------|-----------------------------------------------------------| | Usage | Values vary by printer model. | |------------|-----------------------------------------------------------| | Explanation| Identifies the types of page identifiers supported by this| | | printer, either numeric or alphanumeric string, or both. | | | Only the numeric type is currently supported. This | | | attribute specifies the acceptable values that may be | | | given for document attribute page-select; see | | | pd_att_document(5) for more information. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | Any of the following fixed values: | | | | | | numeric | |------------|-----------------------------------------------------------| | Default | No default | |------------|-----------------------------------------------------------| | Usage | o The document attribute page-select is compared to | | Guidelines | this attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | pd-gway-foreign-host | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the remote host associated with an HPDPS | | | Gateway printer. Requests for the HPDPS Gateway | | | printer will query the HPDPS on this host for information | | | on how to contact the remote server. | |------------|-----------------------------------------------------------| | Value Type | Single valued. | |------------|-----------------------------------------------------------| | Value | A text string of up to 255 characters that contains the | | | name of the remote host. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o This attribute is defined only for HPDPS Gateway | | Guidelines | printers. | | | o This attribute names a host that runs a basicdsd | | | server for the remote environment. If the remote | | | logical printer belongs to an NFS diskless cluster, | | | this attribute must name the cluster server host. | | | Otherwise, if the remote printer belongs to a DCE | | | Extended Environment then any host in the DCE cell | | | (that is not a diskless client) may be chosen. | | | Otherwise, the name of the standalone host that | | | defines the remote logical printer must be chosen. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | pd-gway-foreign-printer | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the remote logical printer associated with an | | | HPDPS Gateway printer. Requests for the HPDPS Gateway | | | printer will be sent to this logical printer in the | | | foreign environment. | |------------|-----------------------------------------------------------| | Value Type | Single valued. | |------------|-----------------------------------------------------------| | Value | A text string of up to 255 characters that contains the | | | name of the remote logical printer in the foreign | | | environment. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o This attribute is defined only for HPDPS Gateway | | Guidelines | printers. | | | o The value is a logical printer name that must be | | | recognized by the HPDPS on the remote host given by | | | attribute pd-gway-foreign-host. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | plexes-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the plexes supported by this printer. Plex | | | indicates whether the page images of the output document | | | are conditioned for eventual one-sided or two-sided | | | printing, and the relative orientation of consecutive | | | pages. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | Any of the following fixed values: | | | | | | simplex (single sided) | | | duplex (double sided) | | | tumble (double sided, every other page upside-down) | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o The document attribute plex is compared to this | | Guidelines | attribute for validation. | | | o HPDPS defaults "sides=2" when plex=duplex. HPDPS does| | | not currently perform any other conditioning when | | | plex=duplex. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | printer-mopy-supported | |------------|-----------------------------------------------------------| | Type | Settable | |------------|-----------------------------------------------------------| | Explanation| Indicates if printer is capable of printing multiple | | | copies by spooling a job in internal storage. | |------------|-----------------------------------------------------------| | Value Type | Single boolean value. | |------------|-----------------------------------------------------------| | Values | true, or false. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | To verify if multiple copies can be printed by submitting | | Guidelines | a job to the printer once. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | printer-resolutions-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the resolutions supported by this printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | This is a complex attribute with the following components:| | | | | | o An optional object identifier with one of the | | | following fixed values: | | | | | | highest | | | lowest | | | medium | | | | | | o An integer from 0 to 2147483647. | | | | |------------|-----------------------------------------------------------| | Syntax | [object identifier:]integer value | | | | | | For example: highest:600, or 300 | |------------|-----------------------------------------------------------| | Component | Description | |------------|-----------------------------------------------------------| | 1st | Explanation: If given, the 1st component specifies an | | component | object identifier that is associated with the | | | resolution value given in the 2nd component. | | | This component is optional. | | | | | | If a job specifies the value of the default-printer- | | | resolution attribute to be one of these object | | | identifiers (highest/lowest/medium), this component | | | gives the mapping of that object identifier to the | | | actual resolution specified by the 2nd component. | |------------|-----------------------------------------------------------| | 2nd | Explanation: Actual resolutions in dots per inch supported| | component | by this printer. | |------------|-----------------------------------------------------------| | Default | none | |------------|-----------------------------------------------------------| | Usage | o The document attribute default-printer-resolution is | | Guidelines | compared to this attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | printer-associated-printers | |------------|-----------------------------------------------------------| | Type | Non Settable | |------------|-----------------------------------------------------------| | Explanation| Identifies the physical printers associated with this | | | logical printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | A text string up to 255 characters per physical printer | | | that contains the ID of an associated physical printer. | | | Implicitly set along with the queue attribute | | | physical-printers-assigned of the queue associated with | | | this logical printer when the physical printer registers. | |------------|-----------------------------------------------------------| | Default | No value. | |------------|-----------------------------------------------------------| | Usage | | | Guidelines | | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | printer-initial-value-document | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Associates an initial-value-document object with this | | | logical printer. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | A text string up to 255 characters that contains the name | | | of the initial-value-document object. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o The associated initial-value-document object is used | | Guidelines | to supply values for attributes for documents | | | submitted to this logical printer. These values | | | override server defaults but are overridden by | | | document attribute values specified on the command | | | line. | |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | printer-initial-value-job | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Associates an initial-value-job object with this logical | | | printer. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | A text string up to 255 characters that contains the name | | | of the initial-value-job object. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o The associated initial-value-job object is used to | | Guidelines | supply values for attributes of jobs submitted to | | | this logical printer. These values override server | | | defaults but are overridden by job attribute values | | | specified on the command line. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | printer-locations | |------------|-----------------------------------------------------------| | Input | locations | | Synonym | | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the locations of physical printer devices, or | | | the areas they service, that are allowed for jobs | | | submitted through this logical printer. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | A text string up to 4095 characters per physical printer | | | that contains the actual physical location of a physical | | | printer device. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o The job attribute printer-locations-requested is | | Guidelines | compared to this attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | printer-model | |------------|-----------------------------------------------------------| | Input | model | | Synonym | | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies the model ID of a physical printer device that | | | can accept jobs submitted through this logical printer. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | A text string up to 4095 characters per physical printer | | | that contains the make and model of a physical printer | | | device. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o The job attribute printer-models-requested is | | Guidelines | compared to this attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | printer-name | |------------|-----------------------------------------------------------| | Input | printer, logical-printer | | Synonym | | |------------|-----------------------------------------------------------| | Type | Non Settable | |------------|-----------------------------------------------------------| | Explanation| Identifies this logical printer object. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | A text string up to 255 characters that contains the name | | | of this logical printer. Implicitly set from the | | | argument (ServerName:PrinterName) specified by the | | | pdcreate command used to create this logical printer. | |------------|-----------------------------------------------------------| | Default | No default. | |------------|-----------------------------------------------------------| | Usage | o The job attribute physical-printer-requested is | | Guidelines | compared to this attribute for validation. | | | o The name must be unique within the DCE cell. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | printer-realization | |------------|-----------------------------------------------------------| | Type | Specifiable with the pdcreate command. | |------------|-----------------------------------------------------------| | Explanation| Indicates whether the printer has been designated as a | | | physical or a logical printer. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | One of the following values: | | | | | | logical | | | physical | | | | | | Must be logical for printers created in a spooler server. | |------------|-----------------------------------------------------------| | Default | logical | |------------|-----------------------------------------------------------| | Usage | | | Guidelines | | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | printers-ready | |------------|-----------------------------------------------------------| | Type | Non Settable | |------------|-----------------------------------------------------------| | Explanation| Identifies the physical printers associated with this | | | logical printer that are ready to process a job. | | | Implicitly set when a registered physical printer is | | | identified as ready. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | A text string up to 255 characters per physical printer | | | that contains the ID of a physical printer that is | | | ready. | |------------|-----------------------------------------------------------| | Default | No value. | |------------|-----------------------------------------------------------| | Usage | o A ready physical printer is one that is enabled and | | Guidelines | whose state is either idle, connecting-to-printer, or | | | printing. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | sides-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Identifies whether this logical printer supports printing | | | on one or two or both sides of the media. | |------------|-----------------------------------------------------------| | Value Type | Multiple values. | |------------|-----------------------------------------------------------| | Values | An integer of 1 or 2. To support both single-sided and | | | double-sided printing, use both value 1 and value 2 as | | | separate values for this multiple-valued attribute. | |------------|-----------------------------------------------------------| | Default | No value. | |------------|-----------------------------------------------------------| | Usage | o The document attribute sides is compared to this | | Guidelines | attribute for validation. | |------------|-----------------------------------------------------------| |------------|-----------------------------------------------------------| | Attribute | Description | |------------|-----------------------------------------------------------| | Name | start-message-supported | |------------|-----------------------------------------------------------| | Type | Settable with the pdcreate or pdset commands. | |------------|-----------------------------------------------------------| | Explanation| Indicates whether jobs submitted through this logical | | | printer can specify a start message. | |------------|-----------------------------------------------------------| | Value Type | Single value. | |------------|-----------------------------------------------------------| | Values | One of the following fixed values: | | | | | | Fixed Value Input Synonym | | | true yes | | | false no | |------------|-----------------------------------------------------------| | Default | No value. | |------------|-----------------------------------------------------------| | Usage | o The job attribute job-start-message is compared to | | Guidelines | this attribute for validation. | |------------------------------------------------------------------------|