HP 3000 Manuals HP 3000 Manuals
Running Tests with Screens
To run all the tests with screens:
1. At the MPE prompt, enter:
RUN PPCDIAG.PPC.SYS
2. At the Main Screen, enter X beside Resource Sharing.
3. Choose Perform Tests f1 to start all the tests.
The Test Results Screen is displayed as soon as the tests begin.
4. A flashing message is displayed in the Result column as each test
is performed:
*** Testing ***
Another message informs you of the results of each test as it is
completed.
The Verification, Go/No Go, CHKDISC and Table Utilizations Tests
can also be run from the Advanced Functions screen.
_________________________________________________________________
NOTE The two Verification Tests listed on the Advanced Functions
screen will produce identical results using screens. The
two separate tests are used with commands to produce either
a summary of verification results or a full list of all the
modules and versions found.
_________________________________________________________________
To run a single test:
1. At the Main Screen, enter an X beside Resource Sharing.
2. Choose Advanced Functions f6.
The Advanced Functions screen appears.
3. Select one (or any number) of the tests by typing X beside the
test name.
4. Choose Perform Tests f1.
Results are displayed when the test is complete.
Displaying Configuration Information
Follow these instructions to display configuration information for
Resource Sharing:
To display configuration information:
1. At the Main Screen, enter an X beside Resource Sharing.
2. Choose Config Screen f3.
The Configuration screen appears. Information displayed for
Resource Sharing includes:
* Product ID: Product identification code
* Product Number: HP product number
* Product Name: Resource Sharing
* Diagnostic Pgm: Program name of the product diagnostic
* Diagnostic Catalog: Message catalog for the product
diagnostic
NOTE Event logging is also displayed on the Configuration screen.
Logging is not available for Resource Sharing.