Messages 21000 - 21999 (continued) [ Information Access Server: Error Messages ] MPE/iX 5.0 Documentation
Information Access Server: Error Messages
Messages 21000 - 21999 (continued)
--------------------------------------------------------------------------------------
AC21534 ERROR-The database name has not been converted to TurboIMAGE
Generated by: HDSP or Administrator Utility
This release of the product works only with databases in the
TurboIMAGE format.
Convert the database by logging on as the database creator and
running DBCONV.PUB.SYS.
--------------------------------------------------------------------------------------
AC21535 ERROR-Remote HP 3000 communication has not been established
Generated by: HDSP or Administrator Utility
The NS link to the remote HP 3000 is not active.
Check the datacomm link and try again.
--------------------------------------------------------------------------------------
AC21590 ERROR-Couldn't get database information. DBINFO error number
Generated by: HDSP or Administrator Utility
The database may be corrupt.
Respond to the IMAGE error. Also, try using QUERY with the
database.
--------------------------------------------------------------------------------------
AC21591 ERROR-There are no valid datasets in database name
Generated by: HDSP or Administrator Utility
You are trying to use a password that doesn't give you access to
any valid datasets.
Change the password. You can only configure tables from manual
master and detail datasets.
--------------------------------------------------------------------------------------
AC21592 ERROR-Unexpected DBINFO error number, mode number
Generated by: HDSP or Administrator Utility
Information Access Server encountered a DBINFO error that it does
not recognize and to which it does not know how to react.
Look up the DBINFO error in the TurboIMAGE Data Base Reference
Manual and try to determine the cause of the problem. If you
cannot determine the cause of the problem, call your HP
representative.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21593 ERROR-Unexpected DBIINFO error number, mode number
Generated by: HDSP or Administrator Utility
Information Access Server encountered an OMNIDEX IMSAM DBIINFO
error that it does not recognize and to which it does not know how
to react.
This error should occur only if the database has been enhanced
using the OMNIDEX Information Management System. If this is the
case, look up the DBIINFO error in the OMNIDEX Reference Manual to
determine the cause of the problem. If you still cannot determine
the cause of the problem or if you do not have OMNIDEX installed
on your system, call your HP representative.
--------------------------------------------------------------------------------------
AC21595 INTERNAL ERROR-Database with index number not found
Generated by: HDSP or Administrator Utility
Each database is assigned a number. This error occurs when you
try to retrieve the information for a database but the number
associated with it cannot be found.
The dataset DATA-SRC-INDEX in the data dictionary's
HDPDIC.PPCDICT.HPOFFICE database is used to link data source (such
as a database) entries to the system on which it resides as well
as the tables derived from it. The specified index number
assigned to a database cannot be found in this structure. Most
likely the data dictionary is corrupt.
Use the recovery procedures described in the TurboIMAGE Data Base
Management System Reference Manual.
--------------------------------------------------------------------------------------
AC21597 INTERNAL ERROR-File definition with index number not found
Generated by: HDSP or Administrator Utility
The data source entry (should be a file) was not found in the
dictionary.
The dataset DATA-SRC-INDEX in the data dictionary's
HDPDIC.PPCDICT.HPOFFICE database is used to link data source (such
as a file) entries to the system on which it resides as well as
the tables derived from it. The specified index number assigned
to a database cannot be found in this structure. Most likely the
data dictionary is corrupt.
Use dictionary recovery procedures.
--------------------------------------------------------------------------------------
AC21701 ERROR-Too many items chosen. Maximum allowed is number
Generated by: HDSP or Administrator Utility
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21702 ERROR-Can't access dataset name in database name
Generated by: HDSP or Administrator Utility
An error occurred during an attempt to get the names of the items
in a dataset while adding an IMAGE table.
Use QUERY to try to access the same dataset and respond to the
error issued in QUERY.
--------------------------------------------------------------------------------------
AC21703 ERROR-Can't access any items in the dataset
Generated by: HDSP or Administrator Utility
An attempt was made to access items when working with an IMAGE
table definition. All of the items in the dataset have security
on them. The password needed to access the items is not the
password you used to open the database.
Change the password you are using in the database.
--------------------------------------------------------------------------------------
AC21704 INTERNAL ERROR-Invalid type type for dataset name
Generated by: HDSP or Administrator Utility
An invalid dataset type was returned from IMAGE. The valid types
are automatic (A), manual (M), and detail (D). Something is wrong
with IMAGE.
Use QUERY to access the dataset specified and try to identify the
problem. Note the steps you were performing when the error
occurred and call your HP representative.
--------------------------------------------------------------------------------------
AC21705 ERROR-Item name of dataset name has invalid type K2
When adding an IMAGE table, an item included in the table is not
supported by Information Access Server.
Take the item out of the table definition and add the table
again.
--------------------------------------------------------------------------------------
AC21706 ERROR-Item name doesn't exist in dataset name
Generated by: Administrator Utility
--------------------------------------------------------------------------------------
AC21712 ERROR-Invalid decimal point value for item name of table name
Generated by: Administrator Utility
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21713 ERROR-Invalid conversion type for item name of table name
Generated by: Administrator Utility
You entered a conversion type other than I, C or R for an item on
a Data Conversion screen.
Correct the conversion type.
--------------------------------------------------------------------------------------
AC21715 ERROR-Dataset name can't be blank
Generated by: HDSP or Administrator Utility
--------------------------------------------------------------------------------------
AC21717 ERROR-The zoned item name can't be greater than 26 digits
Generated by: HDSP or Administrator Utility
Do not use this item.
--------------------------------------------------------------------------------------
AC21718 ERROR-The packed item name can't be greater than 28 digits
Generated by: HDSP or Administrator Utility
Do not use this item.
--------------------------------------------------------------------------------------
AC21720 ERROR-Table name does not exist
Generated by: HDSP or Administrator Utility
--------------------------------------------------------------------------------------
AC21721 ERROR-Invalid # entries. Dataset name, table name
Generated by: HDSP or Administrator Utility
More items have been found in the specified table definition than
in the source IMAGE dataset specified.
Use QUERY to check the dataset. Use the synchronization function
in the Administrator Utility to check the table definition.
If you are unable to solve the problem, note the steps you were
performing when the error occurred and call your HP
representative.
--------------------------------------------------------------------------------------
AC21725 INTERNAL ERROR-Invalid type character, table name
Generated by: HDSP or Administrator Utility
The item TABLE-KIND in the dataset TABLE in the data dictionary's
HDPDIC.PPCDICT.HPOFFICE database has an invalid value for the
specified table. Most likely the data dictionary is corrupt.
Use dictionary recovery procedures.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21751 ERROR-Table name already exists
Generated by: HDSP or Administrator Utility
--------------------------------------------------------------------------------------
AC21752 ERROR-Table name can't be blank
Generated by: HDSP or Administrator Utility
--------------------------------------------------------------------------------------
AC21753 ERROR-Invalid table name name
Generated by: HDSP or Administrator Utility
--------------------------------------------------------------------------------------
AC21756 ERROR-Name is part of a view table. Can't be deleted
Generated by: HDSP or Administrator Utility
Tables that are part of a view table's definition (in any level)
cannot be deleted until all view tables that are derived from it
are deleted.
--------------------------------------------------------------------------------------
AC21762 ERROR-Security violation. User can't access table name
Generated by: HDSP
Table security has been put on the specified table, and the user
belongs to an access group that does not have access to that
table.
--------------------------------------------------------------------------------------
AC21763 All items of table name are secured
Generated by: HDSP or Administrator Utility
The user's access group is assigned to the table but other access
groups are assigned to every item in the table. The user can
select the table but cannot access any information in the table.
Adjust the table and item security using the appropriate Security
screens.
--------------------------------------------------------------------------------------
AC21770 ERROR-Table kind of table type is unrecognizable
Generated by: HDSP or Administrator Utility
The item TABLE-KIND in the TABLE dataset TABLE of the data
dictionary's HDPDIC.PPCDICT.HPOFFICE database has a bad value for
the specified table. Most likely the data dictionary is corrupt.
Use dictionary recovery procedures.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21801 ERROR-Group name already has access to table name
Generated by: HDSP or Administrator Utility
Table security has already been assigned so that the specified
access group can access the specified table.
--------------------------------------------------------------------------------------
AC21802 ERROR-Security between the access group and table is not defined
Generated by: Administrator Utility
An attempt was made to delete security from a table, but no
security had been established between the access group and the
table.
--------------------------------------------------------------------------------------
AC21803 ERROR-Item name doesn't exist in table name
Generated by: Administrator Utility
An attempt was made to work with item security, but the specified
item was not part of the specified table.
--------------------------------------------------------------------------------------
AC21804 ERROR-Group name already has access to item name
Generated by: HDSP or Administrator Utility
Item security has already been assigned so that the specified
access group can access the specified item.
--------------------------------------------------------------------------------------
AC21805 ERROR-Item name can't be blank
Generated by: HDSP or Administrator Utility
--------------------------------------------------------------------------------------
AC21806 ERROR-Too many access groups are defined for the item
Generated by: HDSP or Administrator Utility
A maximum of 8 access groups can be assigned to any item.
Use the Delete Item Security screen to delete an existing access
group, then add the new one.
--------------------------------------------------------------------------------------
AC21807 ERROR-Security between the access group and item is not defined
Generated by: Administrator Utility
An attempt was made to delete security from an item, but no
security was established between the access group and the item.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21808 ERROR-Not all of the data sources are controlled by the same DBA
Generated by: Administrator Utility
A secondary DBA is trying to work with a view table, but does not
control all of the data sources from which the table is derived.
The primary DBA can create the view table.
--------------------------------------------------------------------------------------
AC21809 ERROR-Table name is controlled by another DBA
Generated by: HDSP or Administrator Utility
A secondary DBA is trying to work with a table definition, but
another DBA is the controlling DBA for the table.
--------------------------------------------------------------------------------------
AC21810 ERROR-Blank access group entry already defined for table name
Generated by: HDSP or Administrator Utility
For tables with no security (such as a public table), Information
Access Server assigns an access group name of all blanks. This
error indicates a problem in the software because an access group
name of all blanks should not be added more than once.
Call your HP representative.
--------------------------------------------------------------------------------------
AC21860 INTERNAL ERROR-COMMAND failed setting up IPC file equations, CIERR
number
Generated by: Administrator Utility
If the error is repeated, note the steps you were performing when
the error occurred and call your HP representative.
--------------------------------------------------------------------------------------
AC21861 INTERNAL ERROR-Failed to open existing IPC file, FSERR number
Generated by: Administrator Utility
See action for AC21860.
--------------------------------------------------------------------------------------
AC21862 INTERNAL ERROR-Failed to purge existing input IPC file, FSERR
number
Generated by: Administrator Utility
See action for AC21860.
--------------------------------------------------------------------------------------
AC21863 INTERNAL ERROR-Failed to build input IPC file, FOPEN error number
Generated by: Administrator Utility
See action for AC21860.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21864 INTERNAL ERROR-Failed to build input IPC file, FCLOSE error number
Generated by: Administrator Utility
See action for AC21860.
--------------------------------------------------------------------------------------
AC21865 INTERNAL ERROR-FOPEN failed on input IPC file, FSERR number
Generated by: Administrator Utility
See action for AC21860.
--------------------------------------------------------------------------------------
AC21866 INTERNAL ERROR-Failed to purge existing output IPC file, FSERR
number
Generated by: Administrator Utility
See action for AC21860.
--------------------------------------------------------------------------------------
AC21867 INTERNAL ERROR-Failed to build output IPC file, FOPEN error number
Generated by: Administrator Utility
See action for AC21860.
--------------------------------------------------------------------------------------
AC21868 INTERNAL ERROR-Failed to build output IPC file, FCLOSE error
number
Generated by: Administrator Utility
See action for AC21860.
--------------------------------------------------------------------------------------
AC21869 INTERNAL ERROR-FOPEN failed on output IPC file, FSERR number
Generated by: Administrator Utility
See action for AC21860.
--------------------------------------------------------------------------------------
AC21870 INTERNAL ERROR-Failed to initiate son, CREATEPROCESS error number
Generated by: Administrator Utility
See action for AC21860.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21871 ERROR-Failed to write COMAREA to IPC file, FSERR number
Generated by: Administrator Utility
A file system error occurred while sending parameters to or from
the son process. If the FSERR is 0, most likely the son process
terminated unexpectedly.
Note the steps you were performing when the error occurred and
contact your HP representative.
--------------------------------------------------------------------------------------
AC21872 ERROR-Failed to write VIEW_NAME to IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21873 ERROR-Failed to write VIEW_DEFINITION to IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21874 ERROR-Failed to write TABLE_DESCRIPTOR to IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21875 ERROR-Failed to write DATABASE_LIST to IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21876 ERROR-Failed to write VIEW_TABLE_LIST to IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21877 ERROR-Failed to write CLAUSE to IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21878 ERROR-Failed to write SAVE_TABLE_LIST to IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21879 ERROR-Failed to write CODE to IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21880 INTERNAL ERROR-Failed to open existing output IPC file, FSERR
number
Fatal system error.
See cause and action for AC21860.
--------------------------------------------------------------------------------------
AC21881 ERROR-Failed to read COMAREA from IPCfile, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21882 ERROR-Failed to read VIEW_NAME from IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21883 ERROR-Failed to read VIEW_DEFINITION from IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21884 ERROR-Failed to read TABLE_DESCRIPTOR from IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21885 ERROR-Failed to read DATABASE_LIST from IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21886 ERROR-Failed to read VIEW_TABLE_LIST from IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21887 ERROR-Failed to read CLAUSE from IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21888 ERROR-Failed to read SAVE_TABLE_LIST from IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21889 ERROR-Failed to read CODE from IPC file, FSERR number
Generated by: Administrator Utility
See cause and action for AC21871.
--------------------------------------------------------------------------------------
AC21900 INTERNAL ERROR-Inconsistency in Table name; Data-source-name name
Generated by: HDSP or Administrator Utility
An inconsistency was found in the data dictionary's
HDPDIC.PPCDICT.HPOFFICE database. When an attempt was made to get
some information about a configured table, the data type of the
table did not correspond to the type of data source from which it
was derived. The inconsistency is between the TABLE and
TABLE-SOURCE datasets, and most likely indicates corruption in the
data dictionary.
Go back to an earlier version of the data dictionary, or use the
recovery procedures described in the TurboIMAGE Data Base
Management System Reference Manual.
--------------------------------------------------------------------------------------
AC21901 INTERNAL ERROR-Inconsistency in Table name; Data-source-index
number
Generated by: HDSP or Administrator Utility
An inconsistency was found in the data dictionary's
HDPDIC.PPCDICT.HPOFFICE database. When an attempt was made to get
some information about a configured table, the data type of the
table did not correspond to the type of data source from which it
was derived. The inconsistency is between the TABLE and
DATA-SOURCE datasets, and most likely indicates corruption in the
data dictionary.
Go back to an earlier version of the data dictionary, or use the
recovery procedures described in the TurboIMAGE Data Base
Management System Reference Manual.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21910 INTERNAL ERROR-Unrecognized entry type type in database list
Generated by: Administrator Utility
The database list contains an unknown entry type. The list is
generated of all data sources from which the table is derived.
When a procedure used this list, it detected an invalid entry
type, which indicates a problem in the software. The data
dictionary must be corrupt.
Call your HP representative.
--------------------------------------------------------------------------------------
AC21921 ERROR-Sort error number in SORTINIT
Generated by: HDSP or Administrator Utility
A sort error occurred when calling the SORTINIT intrinsic.
Respond to the sort error specified.
--------------------------------------------------------------------------------------
AC21922 ERROR-Sort error number in SORTINPUT
Generated by: HDSP or Administrator Utility
A sort error occurred when calling the SORTINPUT intrinsic.
Respond to the sort error specified.
--------------------------------------------------------------------------------------
AC21923 ERROR-Sort error number in SORTOUTPUT
Generated by: HDSP or Administrator Utility
A sort error occurred when calling the SORTOUTPUT intrinsic.
Respond to the sort error specified.
--------------------------------------------------------------------------------------
AC21924 ERROR-Sort error number in SORTEND
Generated by: HDSP or Administrator Utility
A sort error occurred when calling the SORTEND intrinsic.
Respond to the sort error specified.
--------------------------------------------------------------------------------------
AC21925 ERROR-FWRITE failed writing tables to work file, FSERR number
Generated by: HDSP or Administrator Utility
A file system error occurred when calling the FWRITE intrinsic to
write a list of table names to a temporary file.
Respond to the FSERR specified.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21944 No records selected from the Job Status database
Generated by: HDPUTIL
HDPUTIL was invoked to delete entries from the JOB-STATUS dataset
in the data dictionary's HDPENV.PPCDICT.HPOFFICE database. No
entries qualified for deletion based on the selection criteria
specified in the INFO=string.
--------------------------------------------------------------------------------------
AC21950 ERROR-Failed to close the job status log file, FSERR number
Generated by: HDPUTIL
A file system error occurred when closing the log file JSLOG used
by HDPUTIL to record all entries it purged from the JOB-STATUS
dataset in the data dictionary's HDPENV.PPCDICT.HPOFFICE database.
Respond to the FSERR specified.
--------------------------------------------------------------------------------------
AC21951 ERROR-Failed to issue file equation for log file, CIERR number
Generated by: HDPUTIL
A CIERR error occurred when issuing a file equation to the log
file JSLOG used by HDPUTIL to record all entries it purged from
the JOB- STATUS dataset in the data dictionary's
HDPENV.PPCDICT.HPOFFICE database.
Respond to the CIERR specified.
--------------------------------------------------------------------------------------
AC21952 ERROR-Unrecognized key word before equal sign
Generated by: HDPUTIL
An attempt was made to delete entries from the JOB-STATUS dataset
in the data dictionary's HDPENV.PPCDICT.HPOFFICE database. The
syntax user specification for the purge utility is U or USER =.
If = is found without a preceding U or USER, this error is
displayed. In the INFO= string for HDPUTIL, only the keyword USER
can appear before the equals sign.
Correct the selection criterion and try again.
--------------------------------------------------------------------------------------
AC21953 ERROR-User name is too long
Generated by: HDPUTIL
An attempt was made to delete entries from the JOB-STATUS dataset
in the data dictionary's HDPENV.PPCDICT.HPOFFICE database. In the
INFO= string for HDPUTIL, the user name specified after the USER=
is too long.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21954 ERROR-Missing user name
Generated by: HDPUTIL
An attempt was made to delete entries from the JOB-STATUS dataset
in the data dictionary's HDPENV.PPCDICT.HPOFFICE database. In the
INFO= string for HDPUTIL, no user name was specified after the
USER=.
To reference all users, use "*".
--------------------------------------------------------------------------------------
AC21955 ERROR-Unrecognized key word, expected ON or BEFORE
Generated by: HDPUTIL
An attempt was made to delete entries from the JOB-STATUS dataset
in the data dictionary's HDPENV.PPCDICT.HPOFFICE database. In the
INFO= string for HDPUTIL, "ON" and "BEFORE" are the only keywords
that are valid after the USER=name parameter.
--------------------------------------------------------------------------------------
AC21956 ERROR-Date field is too long
Generated by: HDPUTIL
An attempt was made to delete entries from the JOB-STATUS dataset
in the data dictionary's HDPENV.PPCDICT.HPOFFICE database. In the
INFO= string for HDPUTIL, the date specified is too long.
--------------------------------------------------------------------------------------
AC21957 ERROR-Incomplete selection specification
Generated by: HDPUTIL
An attempt was made to delete entries from the JOB-STATUS dataset
in the data dictionary's HDPENV.PPCDICT.HPOFFICE database. In the
INFO= string for HDPUTIL, no date was specified even though the
keyword ON or BEFORE was specified.
Remove the keyword or include a date.
--------------------------------------------------------------------------------------
AC21958 ERROR-User specified does not exist in the dictionary
Generated by: HDPUTIL
An attempt was made to delete entries from the JOB-STATUS dataset
in the data dictionary's HDPENV.PPCDICT.HPOFFICE database. In the
INFO= string for HDPUTIL, the user specified is not defined as an
Access user in the data dictionary.
--------------------------------------------------------------------------------------
AC21959 ERROR-No selection criterion was specified
Generated by: HDPUTIL
HDPUTIL was invoked without the required INFO= string.
Run HDPUTIL.PPC.SYS;INFO="criterion" or use the UDC JSPURGE
"criterion".
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21960 ERROR-Failed to convert date to calendar format, NLS error number
Generated by: HDPUTIL
A NLS error occurred when an attempt was made to convert the date
specified in the INFO= string when HDPUTIL was invoked.
Respond to the NLS error specified.
--------------------------------------------------------------------------------------
AC21965 ERROR-Unexpected DBGET error number on HDPENV database
Generated by: HDPUTIL
An IMAGE error occurred when calling the DBGET intrinsic on the
data dictionary's HDPENV.PPCDICT.HPOFFICE database.
Respond to the IMAGE error specified.
--------------------------------------------------------------------------------------
AC21966 ERROR-Unexpected DBDELETE error number on HDPENV database
Generated by: HDPUTIL
An IMAGE error occurred when calling the DBDELETE intrinsic on the
data dictionary's HDPENV.PPCDICT.HPOFFICE database.
Respond to the IMAGE error specified.
--------------------------------------------------------------------------------------
AC21967 ERROR-Unexpected DBFIND error number on HDPENV database
Generated by: HDPUTIL
An IMAGE error occurred when calling the DBFIND intrinsic on the
data dictionary's HDPENV.PPCDICT.HPOFFICE database.
Respond to the IMAGE error specified.
--------------------------------------------------------------------------------------
AC21968 ERROR-Unexpected DBCLOSE error number on HDPENV database
Generated by: HDPUTIL
An IMAGE error occurred when calling the DBCLOSE intrinsic on the
data dictionary's HDPENV.PPCDICT.HPOFFICE database.
Respond to the IMAGE error specified.
--------------------------------------------------------------------------------------
AC21998 ERROR-Initiated host batch job successfully
Generated by: HDPUTIL
This is a status message written to the JOB-STATUS dataset in the
data dictionary's HDPENV.PPCDICT.HPOFFICE database when a Host
Batch Facility job is successfully initiated.
Table 1-0. (cont.)
--------------------------------------------------------------------------------------
AC21999 ERROR-Streamed job file successfully
Generated by: HDPUTIL
MPE/iX 5.0 Documentation