HP 3000 Manuals HP 3000 Manuals
Diagnostic Codes From a Remote Host
The following table lists diagnostic codes from a remote MPE XL system
that could be received on the local system.
Table B-2. Diagnostic Codes From a Remote Host
--------------------------------------------------------------------------------------------
| | |
| Diagnostic Code | Meaning/Cause |
| | |
--------------------------------------------------------------------------------------------
| | |
| 48 | Inactivity timer expired. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 65 | Facility not allowed. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 70 | Incoming call barred. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 160 | DTE specific for example: restricted access, unknown |
| | circuit, unknown local facility, circuit in use, |
| | destination not allowed, or reverse charge call not |
| | accepted. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 161 | DTE operational. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 162 | DTE not operational. Level 3 out of order, or Level 2 |
| | out of order. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 163 | Network congestion. |
| | |
--------------------------------------------------------------------------------------------
| | |
| 166 | D-bit procedure not supported. |
| | |
--------------------------------------------------------------------------------------------