HP 3000 Manuals HP 3000 Manuals
Printing Reports
The HP Predictive Support reports are:
* Action Summary Report
* Configuration Report
* Versions Report
* Trace Report
* PSCONFIG Log Report
Table 6-1 shows which reports can be generated either automatically
and/or interactively from MPE or psconfig.
Table 6-1. Printing Reports Overview
----------------------------------------------------------------------------------------------
| | | |
| Report | Automatically | Interactively |
| | | |
----------------------------------------------------------------------------------------------
| | | |
| Action Summary | X | X |
| | | |
----------------------------------------------------------------------------------------------
| | | |
| Configuration | X | X |
| | | |
----------------------------------------------------------------------------------------------
| | | |
| Versions | | X |
| | | |
----------------------------------------------------------------------------------------------
| | | |
| Trace | | X |
| | | |
----------------------------------------------------------------------------------------------
| | | |
| PSCONFIG Log | | X |
| | | |
----------------------------------------------------------------------------------------------
The Action Summary report can be printed or generated automatically after
each HP Predictive Support run, or only if a run reveals new information.
The Configuration Report can be printed or generated automatically upon
exiting psconfig, provided that changes were made.
HP Predictive Support reports can be printed interactively at any time
from the Print Reports Menu or the MPE prompt. However, the Action
Summary Report cannot be printed interactively when HP Predictive Support
is running.
From MPE
-------------------------------------------------------------------------------
| | |
| To Print | Type at the MPE Prompt |
| | |
-------------------------------------------------------------------------------
| | |
| Action Summary Report | run psconfig.pred.sys;info="print action" |
| | |
-------------------------------------------------------------------------------
| | |
| Versions Report | run psconfig.pred.sys;info="print versions" |
| | |
-------------------------------------------------------------------------------
| | |
| Configuration Report | run psconfig.pred.sys;info="print configuration" |
| | |
-------------------------------------------------------------------------------
| | |
| Trace Report | run psconfig.pred.sys;info="print trace" |
| | |
-------------------------------------------------------------------------------
| | |
| PSCONFIG Log Report | run psconfig.pred.sys;into="print psconfig" |
| | |
-------------------------------------------------------------------------------
NOTE Reports are printed to the destination configured through Item 6 of
the Reports Output Options Menu (see Figure 4-10).
From psconfig
Reports can also be printed from psconfig using the Print Reports Menu:
* From the Main Menu: Type 5 or print.
This displays the Print Reports Menu:
__________________________________________________________________________________
| |
| |
| |
| |
| ************************************************************************* |
| |
| M (MainMenu) P (PreviousMenu) R (Refresh) H (Help) E (Exit) |
| |
| Print Reports |
| |
| 1 - ACTION Summary Report |
| 2 - VERSIONS Report |
| 3 - CONFIGURATION Report |
| 4 - TRACE Report |
| 5 - PSCONFIG Log Report |
| 6 - CHANGE output destination temporarily from: |
| [Screen] |
| |
| Type an item number, an item key, or a command: |
| |
| |
__________________________________________________________________________________
Figure 6-1. Print Reports Menu
To Print a Specific Report.
* Type the item number or the item key of the report you want.
For example, to print the "Versions Report," which lists the HP
Predictive Support ruleset versions currently on the system, type either
2 or versions
NOTE The requested report is printed to the output destination
designated in Item 6 of the Print Reports Menu.
To Temporarily Change the Report Output Destination.
To temporarily change the output destination of the report you are
requesting:
1. Type 6 or change. You are then prompted for the new output
destination.
2. Type either d (Device), f (File), or s (Screen).
a. If you type d, you must supply the device class name, as
reflected in SYSGEN, and a fully qualified environment file
name (if the device requires one).
i. Example of device class name: pp
ii. Example of fully qualified environment file name:
elite.hpenv.sys
b. If you type f, supply a fully qualified file name unless
you want the report file written to the PRED group of the
SYS account.
Example: psxlrpt.pred.sys
NOTE The change is temporary, and remains in effect for the time you are
in this menu only. Once you leave the menu, the output destination
reverts to the default that appeared on the menu when you first
accessed it. To change the default, go to the Reports Output
Options Menu (see Figure 4-10).