HP 3000 Manuals HP 3000 Manuals
Initial Values
This section contains examples of the following initial values report
phases:
* Initial PARM file global information.
* Initial PARM file application definitions.
Initial PARM File Global Information
You must specify DETAIL=ON.
This report lists the contents of SCOPE's PARM file at the time of the
earliest global record in the log file. Later global-information change
notifications are based on the values in this report. If no change
notification exists for a particular parameter, it means that the
parameter kept its original setting for the duration of the scan.
01/03/90 12:36 SYSTEM ID="COOKIE PTC Hewlett-Packard SERIES 950"
SCOPE/XL B.00.00.00 SAMPLE INTERVAL = 300,300,60 SECONDS, LOG VERSION=B
OS=MPE/XL A.30.00 SYSTEM=3000/950 S/N=0
LOGGING GLOBAL APPLICATION PROCESS DISCSPACE RECORDS
THRESHOLDS: CPU= 10%, DISC=10/SEC, RESP=5.0 SEC, FIRST=1.0, SEC TRANS=100
MINTHINK=0.001 SEC, MAXTHINK=3600 SEC
NONEW=FALSE, NOKILLED=FALSE, NOSHORT=30
WAIT THRESHOLDS: CPU=100%, DISC=100%, MEMORY=100%, IMPEDE=100%
MEMORY: PHYSICAL=128.0 MBYTES, USER=128.0 MBYTES, SWAP=0.0 MBYTES
DISC LOGICAL DEVS: 1 2 3 4 5 15 16 17
The date and time listed on the first line correspond to the first date
and time in the global log file and indicate when SCOPE was started.
Data records may have been rolled out of the global log file so the date
and time on this report do not necessarily indicate the first global
record in the log file.
Initial PARM File Application Definitions
You must specify DETAIL=ON and have APPLICATION data in the log file.
This report lists the name and definition of each application at the time
the first application record is listed in the log files. Any application
addition or deletion notifications you receive are based on this initial
list of applications.
01/03/90 12:36 APPLICATION(1)="OTHER"
01/03/90 12:36 APPLICATION(2)="Resource Sharing"
FILE=@.PPC.SYS; @.PSPOOLER.SYS; PCLINK.PUB.SYS; PCSERVER.PUB.SYS;
FILE=PSUTIL.PUB.SYS; PDSERVER.PUB.SYS
01/03/90 12:36 APPLICATION(3)="SPOOLING"
USER=@,RSPOOL@.SYS,@; RSPOOL@,@.@,@
NOTE During the SCAN, you can be notified of applications that were
added or deleted. This decision is based entirely on the
application name.
No attempt is made to detect a change in the definition of an
application. If an application with a new name is detected, it is
listed along with its new definition.
The date and time on this record is the last time SCOPE was started
before logging the first application record currently in the log
file.