HP 3000 Manuals

Configuring and Managing Host-Based X.25 Links

DTCCNTRL Examples 

Following are examples of using the DTCCNTRL command to control the
operations of a DTC/X.25 Network Access card.  In these examples, the
card is mounted in slot 3 of a DTC with the node named DTC1.NET.IND.
Start X.25 support services:

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25

Start PAD support services (X.25 must already be started):

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTPADSUP

Start both X.25 and PAD support services:

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTBOTH

OR (execute commands in this order):

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25 :DTCCNTRL
DTC=DTC1.NET.IND;CARD=3;FUNC=STARTPADSUP

Display status of DTC:

:DTCCNTRL DTC=DTC1.NET.IND;FUNC=STATUS

Stop both X.25 and PAD support services:

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STOPBOTH

OR (execute commands in this order):

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STOPPADSUP :DTCCNTRL
DTC=DTC1.NET.IND;CARD=3;FUNC=STOPX25

Start X.25 iX System Access for the network named X25NET (execute
commands in this order):

                                 Table 7-5.   

--------------------------------------------------------------
|                                                         |  |
| :DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25         |  |
|                                                         |  |
--------------------------------------------------------------
|                                                         |  |
| :NETCONTROL START;NET=X25NET                            |  |
|                                                         |  |
-------------------------------------------------------------- 
|                                                         |  |
| :NSCONTROL START                                        |  |
|                                                         |  |
--------------------------------------------------------------

Stop X.25 iX System Access for the network named X25NET (execute commands
in this order):

                                 Table 7-6.   

-----------------------------------------------------------
|                                                      |  |
| :NSCONTROL STOP                                      |  |
|                                                      |  |
-----------------------------------------------------------
|                                                      |  |
| :NETCONTROL STOP;NET=X25NET                          |  |
|                                                      |  |
----------------------------------------------------------- 
|                                                      |  |
| :DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STOPX25       |  |
|                                                      |  |
-----------------------------------------------------------

Force operation of a DTCCNTRL command when another user has exclusive
access to the DTCCNTRL code module:

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25;FORCED=Y

MPE/iX 5.5 Documentation