HP 3000 Manuals HP 3000 Manuals
DTCCNTRL Parameters
Dynamically implements DTS changes made in NMMGR. Initiates automatic
configuration of DTCs. Shuts down and restarts the DTS subsystem.
Starts, stops, and controls the operation of host-based X.25 connections.
See the following sections for further information on each of the
functions listed below. See the Configuring Systems for Terminals,
Printers, and Other Serial Devices manual for additional information on
the functions that are not X.25 or PAD operations.
Syntax
Table 7-1.
----------------------------------------------------------------
| |
| |
----------------------------------------------------------------
| | | |
| DTCCNTRL | { | DTC=dtcname; |
| | | |
----------------------------------------------------------------
| | |
| | FUNC=function; |
| | |
----------------------------------------------------------------
| | |
| | CARD=cardnum} |
| | |
----------------------------------------------------------------
| | | |
| | ] | ;FORCED=fopton] |
| | | |
----------------------------------------------------------------
| |
| |
----------------------------------------------------------------
Parameters
DTC=dtcname Required if FUNC is one of STARTX25, STARTPADSUP,
STARTBOTH, STOPX25, STOPPADSUP, STOPBOTH, or
STATUS. The DTC node name of the DTC on which the
operation is to be performed, in the form:
name[.domain][.organization]
If the domain or organization are not provided, the
domain and organization of the local node will be
assumed as the default.
FUNC=function Optional. The function to be performed. If this
parameter is omitted, DTCCNTRL will display the
menu shown below. The desired function can then be
selected from the menu.
The available functions are:
DCSTATUS Displays the result of the
last time dTS dynamic
configuration was invoked.
DYNCONF Dynamically implement DTS
changes made in NMMGR.
AUTOCONF Initiate automatic
configuration of a new DTC.
SHUTDOWN Shutdown the DTS subsystem
and release all DTS system
resources.
RESTART Startup the DTS subsystem.
DTS must be shutdown first.
STARTX25 Activates services on the
specified card.
STARTPADSUP Activates PAD support
services on the specified
card. X.25 services must
already be active.
STARTBOTH Activates both X.25 and PAD
support services on the
specified card.
STOPX25 Deactivates X.25 services on
the specified card. If PAD
support services are active,
they must be deactivated
prior to entering this
command.
STOPPADSUP Deactivates PAD support
services on the specified
card. X.25 services remain
active.
STOPBOTH Deactivates both X.25 and PAD
support services on the
specified card.
STATUS Displays information about
the DTC, including type (16,
48 or 72MX), X.25 cards, and
whether X.25 or PAD support
is active on the cards.
CARD=cardnum Required if FUNC is one of STARTX25, STARTPADSUP,
STARTBOTH, STOPX25, STOPPADSUP, or STOPBOTH.
Specifies the X.25 card number on which the FUNC
operation is to be performed.
FORCED=foption Optional. If FUNC is SHUTDOWN specifies whether
all active ldevs will be aborted. If FUNC is one
of STARTX25, STARTPADSUP, STARTBOTH, STOPX25,
STOPPADSUP or STOPBOTH. Specifies whether the
operation will be performed even if another user is
accessing the DTC Manager.
N Default. If FUNC is
SHUTDOWN, DTS shutdown is not
attempted if there are active
ldevs. If FUNC is a PAD or
X.25 support service, the
function is not performed if
another user is accessing the
DTC Manager.
Y If FUNC is SHUTDOWN, causes
all active ldevs to be
aborted on DTS shutdown. For
shutdown, this option can
only be invoked from the
command line. If FUNC is a
X.25 or PAD support function
forces the X.25 or PAD
support function to occur
even if another user is
accessing the DTC Manager.