HP 3000 Manuals

Configuring and Managing Host-Based X.25 Links

DTCCNTRL Examples 

Following are examplesof using the DTCCNTRL command to control the
operations of a DTC/X.25 Network Access card.  In these examples, the
card is mounted in slot 3 of a DTC with the node named DTC1.NET.IND.

Start X.25 support services:   

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25

Start PAD support services (X.25 must already be started):   

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTPADSUP

Start both X.25 and PAD support services: 

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTBOTH

OR (execute commands in this order):

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25 :DTCCNTRL
DTC=DTC1.NET.IND;CARD=3;FUNC=STARTPADSUP

Display statusof DTC: 

:DTCCNTRL DTC=DTC1.NET.IND;FUNC=STATUS

Stopboth X.25 and PAD support services: 

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STOPBOTH

OR (execute commands in this order):

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STOPPADSUP :DTCCNTRL
DTC=DTC1.NET.IND;CARD=3;FUNC=STOPX25

Start X.25 iX System Access for the network namedX25NET (execute commands 
in this order): 

                                 Table 7-2.   

--------------------------------------------------------------
|                                                         |  |
| :DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25         |  |
|                                                         |  |
--------------------------------------------------------------
|                                                         |  |
| :NETCONTROL START;NET=X25NET                            |  |
|                                                         |  |
--------------------------------------------------------------
|                                                         |  |
| :NSCONTROL START                                        |  |
|                                                         |  |
--------------------------------------------------------------

Stop X.25 iX System Access for the networknamed X25NET (execute commands 
in this order): 

                                 Table 7-3.   

-----------------------------------------------------------
|                                                      |  |
| :NSCONTROL STOP                                      |  |
|                                                      |  |
-----------------------------------------------------------
|                                                      |  |
| :NETCONTROL STOP;NET=X25NET                          |  |
|                                                      |  |
-----------------------------------------------------------
|                                                      |  |
| :DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STOPX25       |  |
|                                                      |  |
-----------------------------------------------------------

Download reconfigured X.25 and PAD support valuesfor a card: 

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=RC;RECONF=CARD

Force operation of a DTCCNTRL commandwhen another user has exclusive 
access to the DTCCNTRL code module: 

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25;FORCED=Y

MPE/iX 5.0 Documentation