HP 3000 Manuals HP 3000 Manuals
TCP Logging Locations (contd)
10406 CLAS0005 Cause: The TCP SIP couldn't get a route to send
an outbound reset after waiting for reply from
paths.
Action: Informative message. No action
required. Try to determine why route to remote
host has failed. Possibilities include
node/media failure and misconfiguration.
10407 CLAS0005 Cause: We verified a connection's route due to
negative advice, and found that there is no
longer a route to the remote host. The
connection will abort.
Action: Informative message. No action
required. Try to determine why route to remote
host has failed. Possibilities include
node/media failure and misconfiguration.
10501 CLAS0002 Cause: Nettmr_reset_timer call returned an
error.
Action: PARM is nettmr error returned. Submit
an SR.
10502 CLAS0002 Cause: Nettmr_free_timer call returned an
error.
Action: PARM is nettmr error returned. Submit
an SR.
10503 CLAS0002 Cause: Nettmr_get_timer call returned an error.
Action: PARM is nettmr error returned. Submit
an SR.
10504 CLAS0002 Cause: Nettmr_reset_timer call returned an
error.
Action: PARM is nettmr error returned. Submit
an SR.
10601 CLAS0002 Cause: CB_INIT returned a bad status while
initializing the hash table semaphore. CB_INIT
was called during network startup.
Action: PARM is semaphores error returned.
Submit an SR.
10602 CLAS0002 Cause: CB_INIT returned a bad status while
initializing the global TCP semaphore. CB_INIT
was called during network startup.
Action: PARM is semaphores error returned.
Submit an SR.
10604 CLAS0002 Cause: CB_INIT returned a bad status while
initializing a connection semaphore. CB_INIT
was called during TCP connection establishment.
Action: PARM is semaphores error returned.
Submit an SR.
10702 CLAS0002 Cause: Attempt to unfreeze user data vector
failed.
Action: PARM is memory manager error returned.
Submit an SR.
10703 CLAS0002 Cause: Attempt to freeze user data vector
failed.
Action: PARM is memory manager error returned.
Submit an SR.
10704 CLAS0002 Cause: Attempt to unfreeze user data vector
failed.
Action: PARM is memory manager error returned.
Submit an SR.
10801 CLAS0002 Cause: NMCLOSETRACE returned a bad status
during an IPCCONTROL traceoff call.
Action: PARM is the NMS error returned. Submit
an SR.
10802 CLAS0002 Cause: NMOPENLOG returned a bad status during
network startup.
Action: PARM is the NMS error returned. Submit
an SR.
10803 CLAS0002 Cause: NMMONSTARTREQ call returned a bad status
during network startup.
Action: PARM is the NMS error returned. Submit
an SR.
10804 CLAS0002 Cause: Bad status was returned in a message
from the TCP SIP during network startup. The
TCP SIP initialization has failed.
Action: PARM is TCP SIP initialization error.
Look for a logging indication explaining TCP SIP
initialization failure. Submit an SR.
10805 CLAS0002 Cause: Bad status was returned from NMCLOSELOG.
This was called during system shutdown.
Action: PARM is the NMS error returned. Submit
an SR.
10806 CLAS0002 Cause: Bad status was returned from
NMMONDELETEID. This was called during system
shutdown.
Action: PARM is the NMS error returned. Submit
an SR.
10807 CLAS0002 Cause: Bad status was returned from NMCLOSELOG
during network shutdown.
Action: PARM is NMS error returned. Submit an
SR.
10808 CLAS0002 Cause: NMWRITETRACE call returned a bad status
while tracing a data packet.
Action: PARM is NMS error returned. Submit an
SR.
10809 CLAS0002 Cause: NMWRITETRACE call returned a bad status
while tracing a reset packet being sent out by
the TCP SIP.
Action: PARM is NMS error returned. Submit an
SR.
10810 CLAS0002 Cause: NMWRITETRACE call returned a bad status
while tracing an ICMP message.
Action: Parm is NMS error returned. Submit an
SR.
10811 CLAS0002 Cause: NMWRITETRACE call returned a bad status
while tracing a resource interface.
Action: PARM is NMS error returned. Submit an
SR.
10812 CLAS0002 Cause: NMWRITETRACE call returned a bad status
while tracing a resource interface.
Action: PARM is NMS error returned. Submit an
SR.
10813 CLAS0002 Cause: REG_DEL_ENTITY returned a bad status.
It was called during network shutdown.
Action: PARM is the registry error returned.
Submit an SR.
10814 CLAS0002 Cause: REG_ADD_ENTITY returned a bad status.
It was called during network startup.
Action: PARM is the registry error returned.
Submit an SR.
10815 CLAS0002 Cause: NWWRITETRACE returned a bad status while
attempting to write a state trace record for a
connection.
Action: PARM is NWS error returned. Submit an
SR.
10816 CLAS0002 Cause: NWWRITETRACE returned a bad status while
attempting to write a state trace record for the
TCP SIP.
Action: PARM is NWS error returned. Submit an
SR.
10817 CLAS0002 Cause: NWWRITETRACE returned a bad status while
attempting to write a message or procedure call
trace record for a connection.
Action: PARM is NWS error returned. Submit an
SR.
10818 CLAS0002 Cause: NWWRITETRACE returned a bad status while
attempting to write a message or procedure call
trace record for the TCP SIP.
Action: PARM is NWS error returned. Submit an
SR.
10819 CLAS0002 Cause: DICT_DELETE returned a bad status while
attempting to remove the TCP SIP from the cm
port dictionary during shutdown.
Action: PARM is the returned error. Submit an
SR.
10901 CLAS0003 Cause: A call to an SDI driver failed.
Action: PARM is the call result status. Submit
an SR.
10902 CLAS0002 Cause: HPGETSYSPLABEL call failed to get plabel
of TCP's timer trap routine. This would occur
during network startup.
Action: Network Transport installation looks
suspicious. Verify Transport installed
correctly. Submit an SR.
11001 CLAS0003 Cause: TCP accepted a new ack, but no
outstanding data was found on the retransmission
queue. The connection is in an inconsistent
state.
Action: Submit an SR.
11101 CLAS0002 Cause: TCP received a packet in the
syn_received state, but found that the internal
IPC state was not consistent with this state.
Action: Submit an SR.
11102 CLAS0002 Cause: TCP received a packet in the syn_sent
state, but found that the internal IPC state was
not consistent with this state.
Action: Submit an SR.
11103 CLAS0002 Cause: TCP has entered a state (processing an
inbound fin) which inconsistent with its
internal IPC state. This is a software error.
Action: Submit an SR.
11201 CLAS0002 Cause: TCP internal timer state was
inconsistent with actual timer activity.
Action: Submit an SR.
11301 CLAS0003 Cause: TCP wanted to adjust the length of data
of a composite buffer beyond the end of the last
buffer in the chain.
Action: Submit an SR.
11401 CLAS0003 Cause: Bad status returned from a call to the
tcp_read_completor in the loopback send path.
Action: Submit an SR.
11402 CLAS0003 Cause: Bad status returned from a call to the
tcp_read_completor in the loopback
retransmissive send path.
Action: Submit an SR.
11501 CLAS0005 Cause: We received a reply from buffer manager
containing a buffer that is not part of our
buffer pool.
Action: Informative message. No action
required. This may indicate a procedural error
within TCP.
11601 CLAS0002 Cause: We received a reply from buffer manager
when we weren't expecting one.This is a software
error in TCP.
Action: This is a dangerous circumstance, as we
are not keeping proper track of our resources.
Submit an SR.
11701 CLAS0002 Cause: We received a reply from buffer manager
but our buffer state indicated that we were not
expecting one.
Action: This is a dangerous circumstance, as we
are not keeping proper track of our resources.
Submit an SR.
11801 CLAS0003 Cause: We had a problem resegmenting the
retransmission queue.
Action: Submit an SR.
11901 CLAS0002 Cause: Attempt to add a network to TCP's IP
list table when the table is full. Connection
is added to temporary list.
Action: PARM is source IP address of
connection. Check configuration for number of
configured networks. If ok, then submit an SR.
11902 CLAS0002 Cause: Connection could not be found in TCP's
IP list table when it is shutting down.
Action: PARM is source IP address of
connection. Submit an SR.
11903 CLAS0002 Cause: Connection was removed from TCP's
temporary IP list table. See location 11901.
Action: Same as for location 11901.
12001 CLAS0003 Cause: A connection received a packet with a
bad checksum.
Action: Informative message. No action
required. Bad checksums usually indicate poor
transmission quality.
12002 CLAS0003 Cause: A connection received a packet with a
bad checksum.
Action: Informative message. No action
required. Bad checksums usually indicate poor
transmission quality.
12003 CLAS0003 Cause: A connection received a packet with a
bad checksum.
Action: Informative message. No action
required. Bad checksums usually indicate poor
transmission quality.
12004 CLAS0005 Cause: The TCP SIP tossed an inbound packet due
to a bad checksum.
Action: Informative message. No action
required. Bad checksums usually indicate poor
transmission quality.
12101 CLAS0003 Cause: A TCP connection received a packet with
precedence or security options which do not
match those of the connection. The connection
will abort.
Action: Remote protocol error indication. Use
tracing or line analysis to capture connection
dialog. If precedence or security option of
inbound packet changes report an error against
the remote implementation. Otherwise, submit an
SR.
12102 CLAS0003 Cause: A TCP connection received a packet with
precedence or security options which do not
match those of the connection. The connection
will abort.
Action: Remote protocol error indication. Use
tracing or line analysis to capture connection
dialog. If precedence or security option of
inbound packet changes report an error against
the remote implementation. Otherwise, submit an
SR.
12103 CLAS0003 Cause: A TCP connection received a packet with
precedence or security options which do not
match those of the connection. The connection
will abort.
Action: Remote protocol error indication. Use
tracing or line analysis to capture connection
dialog. If precedence or security option of
inbound packet changes report an error against
the remote implementation. Otherwise, submit an
SR.
12104 CLAS0005 Cause: The TCP SIP tossed an inbound packet due
to unmatched precedence or security to the
intended socket.
Action: Informative message. No action
required.
12201 CLAS0003 Cause: A packet was received by a connection
which had the syn flag set and was within
window. This is a remote protocol violation.
The connection will abort.
Action: Remote protocol error indication. Use
tracing or line analysis to capture connection
dialog. Report an error against remote
implementation.
12202 CLAS0003 Cause: A packet was received by a connection
which had the syn flag set and was within
window. This is a remote protocol violation.
The connection will abort.
Action: Remote protocol error indication. Use
tracing or line analysis to capture connection
dialog. Report an error against remote
implementation.
12301 CLAS0003 Cause: A packet was received without the ACK
flag set by a connection in a state in which
such a packet is not acceptable. The packet
will be ignored. This is a remote protocol
violation.
Action: Remote protocol error indication. Use
tracing or line analysis to capture connection
dialog. Report an error against remote
implementation.
12302 CLAS0003 Cause: A packet was received without the ACK
flag set by a connection in a state in which
such a packet is not acceptable. The packet
will be ignored. This is a remote protocol
violation.
Action: Remote protocol error indication. Use
tracing or line analysis to capture connection
dialog. Report an error against remote
implementation.
12303 CLAS0003 Cause: A packet was received without the ACK
flag set by a connection in a state in which
such a packet is not acceptable. The packet
will be ignored. This is a remote protocol
violation.
Action: Remote protocol error indication. Use
tracing or line analysis to capture connection
dialog. Report an error against remote
implementation.
12401 CLAS0003 Cause: A packet was received with an invalid
ACK status. The packet will be ignored.
Action: Remote protocol error indication.
Occasional occurrences are acceptable.
Excessive occurrences indicate an error with
either the remote or local connection half's
tracking of current sequence number statuses.
Submit an SR; report an error against the remote
implementation.
12402 CLAS0003 Cause: A packet was received with an invalid
ACK status. The packet will be ignored.
Action: Remote protocol error indication.
Occasional occurrences are acceptable.
Excessive occurrences indicate an error with
either the remote or local connection half's
tracking of current sequence number statuses.
Submit an SR; report an error against the remote
implementation.
12403 CLAS0003 Cause: A packet was received with an invalid
ACK status. The packet will be ignored.
Action: Remote protocol error indication.
Occasional occurrences are acceptable.
Excessive occurrences indicate an error with
either the remote or local connection half's
tracking of current sequence number statuses.
Submit an SR; report an error against the remote
implementation.
12501 CLAS0003 Cause: The remote connection half has sent data
with a sequence number which exceeds the fin
sequence number which the remote sent
previously. This is a remote protocol
violation.
Action: Capture data traffic including
offending fin and following data packet using
tracing or a line analyzer. Report an error
against the remote implementation.
12502 CLAS0003 Cause: The remote connection half has sent data
with a sequence number which exceeds the fin
sequence number which the remote sent
previously. This is a remote protocol
violation.
Action: Capture data traffic including
offending fin and following data packet using
tracing or a line analyzer. Report an error
against the remote implementation.
12503 CLAS0003 Cause: The remote connection half has sent data
with a sequence number which exceeds the fin
sequence number which the remote sent
previously. This is a remote protocol
violation.
Action: Capture data traffic including
offending fin and following data packet using
tracing or a line analyzer. Report an error
against the remote implementation.
12504 CLAS0003 Cause: The remote connection half has sent data
with a sequence number which exceeds the fin
sequence number which the remote sent
previously. This is a remote protocol
violation.
Action: Capture data traffic including
offending fin and following data packet using
tracing or a line analyzer. Report an error
against the remote implementation.
12505 CLAS0003 Cause: The remote connection half has sent data
with a sequence number which exceeds the fin
sequence number which the remote sent
previously. This is a remote protocol
violation.
Action: Capture data traffic including
offending fin and following data packet using
tracing or a line analyzer. Report an error
against the remote implementation.
12506 CLAS0003 Cause: The remote connection half has sent data
with a sequence number which exceeds the fin
sequence number which the remote sent
previously. This is a remote protocol
violation.
Action: Capture data traffic including
offending fin and following data packet using
tracing or a line analyzer. Report an error
against the remote implementation.
12507 CLAS0003 Cause: The remote connection half has sent data
with a sequence number which exceeds the fin
sequence number which the remote sent
previously. This is a remote protocol
violation.
Action: Capture data traffic including
offending fin and following data packet using
tracing or a line analyzer. Report an error
against the remote implementation.
12601 CLAS0003 Cause: A packet was received which contained a
TCP header with a max tpdu option which had an
incorrect option length in the option length
field.
Action: Capture data traffic including
offending data packet using tracing or a line
analyzer. Report an error against the remote
implementation.
12701 CLAS0005 Cause: TCP SIP sent out a reset for a packet
with the ack flag set that was received on a
socket in listen state.
Action: Informative message. No action
required.
12702 CLAS0005 Cause: TCP SIP tossed a packet with the ack and
syn flags set that was received for a socket in
the listen state.
Action: Informative message. No action
required.
12801 CLAS0005 Cause: Inbound packet received for a closed
(not opened) sap, so the TCP SIP will send a
reset.
Action: Informative message. No action
required. Start service or open correct SAP if
necessary. PARM is SAP for which packet is
bound.
13001 CLAS0003 Cause: IPC called tcp_receive_reply, but TCP
did not have any record of data outstanding to
IPC.
Action: Submit an SR.
13101 CLAS0003 Cause: IPC called tcp_receive_reply, but TCP
data indicates that IPC should not be in data
receptive state.
Action: Submit an SR.