HP 3000 Manuals HP 3000 Manuals
RPM Logging Location Codes
1 CLAS0002 Cause: Data segment for RPM table could not be
allocated.
Action: See "Submitting an SR" in appendix A of
this manual.
2 CLAS0002 Cause: Insufficient stack space to set
critical.
Action: See "Submitting an SR" in appendix A of
this manual.
3 CLAS0003 Cause: NS global data segment does not exist.
Action: See "Submitting an SR" in appendix A of
this manual.
4 CLAS0002 Cause: RPM table is full.
Action: See "Submitting an SR" in appendix A of
this manual.
5 CLAS0003 Cause: RPM table does not exist.
Action: See "Submitting an SR" in appendix A of
this manual.
6 CLAS0002 Cause: An RPM table entry could not be
allocated.
Action: Decrease the number of active RPM
processes.
7 CLAS0003 Cause: A port message could not be sent to the
server process.
Action: See "Submitting an SR" in appendix A of
this manual.
8 CLAS0003 Cause: RPM buffers could not be allocated in
the server's stack.
Action: See "Submitting an SR" in appendix A of
this manual.
9 CLAS0002 Cause: A buffer for an RPM string could not be
allocated.
Action: Decrease the number of RPM strings
waiting to be transferred.
10 CLAS0003 Cause: An invalid RPM message has been
received.
Action: See "Submitting an SR" in appendix A of
this manual.
11 CLAS0002 Cause: Send of an RPM Length message failed.
Action: See "Submitting an SR" in appendix A of
this manual.
12 CLAS0005 Cause: Receive of an RPM Length Reply message
failed.
Action: See "Submitting an SR" in appendix A of
this manual.
13 CLAS0005 Cause: Send of an RPM Create Request message
failed.
Action: See "Submitting an SR" in appendix A of
this manual.
14 CLAS0005 Cause: Receive of an RPM Create Reply message
failed.
Action: See "Submitting an SR" in appendix A of
this manual.
15 CLAS0005 Cause: Connection could not be opened during an
RPMCREATE.
Action: See "Submitting an SR" in appendix A of
this manual.
16 CLAS0005 Cause: Send of an RPM Kill Request failed.
Action: See "Submitting an SR" in appendix A of
this manual.
17 CLAS0005 Cause: Send of an RPM Kill Reply failed.
Action: See "Submitting an SR" in appendix A of
this manual.
18 CLAS0002 Cause: Connection could not be opened during an
RPMKILL.
Action: See "Submitting an SR" in appendix A of
this manual.
19 CLAS0005 Cause: Initial receive for an RPM message in a
server failed.
Action: See "Submitting an SR" in appendix A of
this manual.
20 CLAS0005 Cause: Send of an RPM Create Reply message
failed.
Action: See "Submitting an SR" in appendix A of
this manual.
21 CLAS0005 Cause: Receive of an RPM Kill Request message
failed.
Action: See "Submitting an SR" in appendix A of
this manual.
22 CLAS0005 Cause: Send of an RPM Kill Reply message
failed. Invalid port message.
Action: See "Submitting an SR" in appendix A of
this manual.
23 CLAS0005 Cause: Send of an RPM Length Reply message
failed.
Action: See "Submitting an SR" in appendix A of
this manual.
24 CLAS0005 Cause: Receive of an RPM Create Request failed.
Action: See "Submitting an SR" in appendix A of
this manual.
25 CLAS0005 Cause: Maximum send size could not be set.
Action: See "Submitting an SR" in appendix A of
this manual.
26 CLAS0005 Cause: Maximum receive size could not be set.
Action: See "Submitting an SR" in appendix A of
this manual.
27 CLAS0005 Cause: Connection between RPM father and RPM
server was lost.
Action: See "Submitting an SR" in appendix A of
this manual.
28 CLAS0003 Cause: Session created by RPM could not be
aborted.
Action: See "Submitting an SR" in appendix A of
this manual.
31 CLAS0005 Cause: Receive of an RPM Control Reply failed.
Action: See "Submitting an SR" in appendix A of
this manual.
34 CLAS0005 Cause: Receive of an RPM Control Request
failed.
Action: See "Submitting an SR" in appendix A of
this manual.
35 CLAS0003 Cause: RPMDAD adoption under DSDAD failed
during a session shutdown.
Action: See "Submitting an SR" in appendix A of
this manual.
36 CLAS0003 Cause: RPMDAD was unable to adopt into the
user's session.
Action: If the RPM session was not aborted by
the system operator, then see "Submitting an SR"
in appendix A of this manual.
37 CLAS0003 Cause: JSMAIN locking mechanism failed during
an adopt.
Action: If the RPM session was not aborted by
the system operator, then see "Submitting an SR"
in appendix A of this manual.
38 CLAS0003 Cause: JSMAIN unlocking mechanism failed during
an adopt.
Action: See "Submitting an SR" in appendix A of
this manual.