HP 3000 Manuals

NS3000/iX Error Messages Reference Manual

DSSERVER Logging Location Codes 

1      CLAS0003     Cause:  DSSERVER stack log buffer could not be
                    allocated.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

2      CLAS0003     Cause:  DSSERVER header for data structures could not
                    be allocated.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

3      CLAS0003     Cause:  Stack buffer space for DSSERVER data
                    structures could not be created.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

4      CLAS0002     Cause:  Port message buffer could not be allocated.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

5      CLAS0002     Cause:  Wait entry for a port could not be allocated.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

6      CLAS0002     Cause:  Could not get an AFT entry for a port.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

7      CLAS0002     Cause:  Could not create a port.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

8      CLAS0002     Cause:  Could not get a data segment entry to create a
                    port.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

9      CLAS0003     Cause:  Could not add a port to the port dictionary.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

10     CLAS0003     Cause:  Could not find a wait entry for nowait I/O
                    which completed.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

11     CLAS0003     Cause:  No I/O pending when a nowait I/O completed.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

12     CLAS0003     Cause:  The VT service reported an error.

                    Action:  Repair the VT error, if possible.

13     CLAS0003     Cause:  RFA service reported an error.

                    Action:  Repair the error, if possible.

14     CLAS0003     Cause:  PTOP service reported an error.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

15     CLAS0005     Cause:  Attempt to get an existing IPC connection
                    failed.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

16     CLAS0003     Cause:  Invalid server information number in the port
                    message.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

17     CLAS0003     Cause:  Function number in port message is bad.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

18     CLAS0003     Cause:  Number of service counter for a server is not
                    1.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

19     CLAS0003     Cause:  Attempt to adopt server process under DSDAD
                    failed.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

20     CLAS0003     Cause:  RPM service reported an error.

                    Action:  See "Submitting an SR" in appendix A of this
                    manual.

MPE/iX 5.0 Documentation