HP 3000 Manuals HP 3000 Manuals
$TERMCAP
Syntax
$TERMCAP <func id>[,<func id>][,<func id>]....
where:
<func id> is the number of a terminal type to which the
following text is displayed. (See Appendix A .)
Description
The $TERMCAP directive is used to restrict the display of help text to
those users who are using specific terminals that support specific
functions (see also the $NOTTERMCAP directive). You may need to do this
if the hardware restrictions of particular terminals prevent the use of
certain features or applications. Details of these restrictions for each
Hewlett-Packard terminal can be found in the relevant Datasheet. The
section of restricted text should be terminated by the $TERMCAP
directive.
Example
Specify the capabilities of the terminal as follows:
6 Forms 8 Graphics 10 VisiCalc
7 MTS 9 HP Word 11 HP Slate
Any text enclosed by $TERMCAP directives is displayed only on the
terminals listed after the first directive. For example:
$IDNONHP 9427 "Using the Expense Report Form"
.
.
This text will be seen by the members of all User
Capability Groups for which this page was
installed no matter what terminal they are using.
$TERMCAP 8,6
This text will be seen only by the members of the
User Capability Groups for which this page was
installed who are using terminals that support
HP3000 graphics or Forms.
$TERMCAP
This text will be seen by the members of all User
Capability Groups for which this page was
installed no matter what terminal they are using.