HP 3000 Manuals HP 3000 Manuals
HP Browse Error Messages
020 Initial spool file control information not displayed. (HPBW 020)
The spool file was created using an environment for the laser printer.
This information at the beginning of the file is not displayed by HP
Browse.
030 Carriage Control data not displayed. (HPBW 30)
The file contains carriage control characters. These characters are not
displayed by HP Browse.
090 The cursor was above the first line. (HPBW 90)
You attempted to issue a command while the cursor was above the first
line of text on the screen.
100 The cursor was below the last line. (HPBW 100)
You attempted to issue a command while the cursor was below the last line
of text on the screen.
140 The character is not a valid delimiter. (HPBW 140)
The cursor was positioned on a character that is not a valid delimiter
when performing Find Matching Delimeter. Valid delimiters are: (), [] ,
and {}.
150 A matching delimiter was not found. (HPBW 150)
HP Browse could not locate a delimiter matching the character you
specified.
160 The end of file was reached. (HPBW 160)
You tried to move the cursor beyond the end of the file.
170 The beginning of file was reached. (HPBW 170)
You tried to move the cursor above the beginning of the file.
200 Unable to get collating sequence table for this language. (HPBW 200)
This is not a user error. HP Browse encountered an error while
attempting to retrieve the collating table for the language of the text.
The collating table contains the language-specific ordering of the
characters. Please contact HP support; investigation is required.
210 Unable to get collating sequence table length for this language.
(HPBW 210)
This not a user error. HP Browse encountered an error while attempting
to read the length of the collating table for the language of the text.
The collating table contains the language-specific ordering of the
characters. Please contact HP support; investigation is required.
220 Unable to get attribute table for this language. (HPBW 220)
This is not a user error. HP Browse encountered an error while
attempting to retrieve the attribute table for the language of the text.
The attribute table contains language-specific information about the
characters. Please contact HP support; investigation is required.
230 There is not enough space for the NLS collating sequence table.
(HPBW 230)
This is not a user error. HP Browse could not find enough space in
memory for the collating table. The collating table contains the
language-specific ordering of the characters. Please contact HP support;
investigation is required.
240 Unable to compare strings using NLCOLLATE intrinsic. (HPBW 240)
This is not a user error. A system routine that compares character
strings failed to function properly. Please contact HP support;
investigation is required.
250 Unable to get the upshift table for this language. (HPBW 250)
This is not a user error. HP Browse encountered an error while
attempting to retrieve the upshift table for the language of the text.
The upshift table contains language-specific capitalization information.
Please contact HP support; investigation is required.
260 Unable to get the downshift table for this language. (HPBW 260)
This is not a user error. HP Browse encountered an error while
attempting to retrieve the downshift table for the language of the text.
(The downshift table contains language-specific lowercase information.)
Please contact HP support; investigation is required.
310 Unable to locate the command. (HPBW 310)
This is not a user error. HP Browse could not determine which command
you wanted help text for. Please contact HP support; investigation is
required.
320 Command not listed in help catalog. (HPBW 320)
This is not a user error. HP Browse could not find information in the
help catalog for the specified command. Please contact HP support;
investigation is required.
360 Illegal pattern or pattern too long to be processed. (HPBW 360)
The search pattern you entered either contains pattern-matching
characters that HP Browse cannot properly interpret, or it contains too
many pattern-matching characters.
400 Cannot access input file. (HPBW 400)
This is not a user error. HP Browse encountered an error while getting
information about the file being read in. Please contact HP support;
investigation is required.
450 File has more than 2147483647 lines. (HPBW 450)
The file you are attempting to browse exceeded the current maximum number
of lines (2,147,483,647) that HP Browse can accommodate.
470 Unable to read filename. (HPBW 470)
This is not a user error. HP Browse encountered a problem while
attempting to read the specified file name. Please contact HP support;
investigation is required.
520 Illegal delimiter in filename. (HPBW 520)
You entered an invalid delimiter character in the file name.
530 First character of identifier not alphabetic. (HPBW 530)
The requested file name begins with a non-alphabetic character.
540 Unrecognized file name. (HPBW 540)
MPE rejected one or more components of the requested file name. You may
have misspelled the file name.
550 Identifier in file name is too long. (HPBW 550)
One or more components of the requested file name is longer than eight
characters, which is the maximum MPE allows. You may have misspelled the
file name.
560 Not a legal file name (-XXX). (HPBW 560)
This is not a user error. MPE considers the file name invalid. XXX is
the error number MPE returned to HP Browse. Please contact HP support;
investigation is required.
580 Received error XXX while reading input file. (HPBW 580)
This is not a user error. HP Browse encountered an error while
attempting to read from the input file. XXX is the error number MPE
returned to HP Browse. Please contact HP support; investigation is
required.
670 Cannot read configuration file. (HPBW 670)
HP Browse could not read in the configuration file because you may have
specified a non-existent file name in the file equation :FILE
HPBCONFG=filename.
680 Valid mark numbers are 1 - 9. (HPBW 680)
You specified a mark number out of the valid range. HP Browse supports
mark numbers one through nine only.
690 Cannot save configuration to file. (HPBW 690)
This is not a user error. HP Browse encountered an error while
attempting to save the configuration file. Please contact your system
administrator to check your account, group, and user capabilities.
710 Scroll size too large. Set to maximum size nn. (HPBW 710)
The count you entered before executing a scroll command or the value
entered on the options screen was larger than the maximum allowed. The
value was set to the maximum allowed.
720 Unrecognized command: Command. (HPBW 720)
You attempted to execute an unknown HP Browse command. Command indicates
the invalid key.
730 Unknown command (CIERR XXX). (HPBW 730)
The MPE command interpreter does not recognize the specified command.
XXX is the error number MPE returned.
740 Received CIERR XXX at parameter XXX. (HPBW 740)
MPE returned the system error XXX for the parameter XXX. You may have
misspelled the command.
760 Mark #n has not been set. (HPBW 760)
You attempted to go to a mark that has not been set. You have not set
marker #n.
810 End of file on $STDIN. (HPBW 810)
You entered an :EOD sequence at the beginning of the line during text
entry. HP Browse interprets this sequence as a request to immediately
exit HP Browse.
820 Duplicate permanent file. Unsupported SAVE option in file equation.
(HPBW 820)
A file equation exists for the specified file that contains the SAVE
option. The SAVE option does not allow a duplicate file to be purged.
Remove the SAVE option from the file equation and redo the function.
830 Duplicate permanent file. Unsupported TEMP option in file equation.
(HPBW 830)
A file equation exists for the specified file that contains the TEMP
option. Remove the TEMP option from the file equation and redo the
function.
840 Device type of save file not supported. (HPBW 840)
You attempted to copy a portion of a file (using the print command) or
attempted to save the configuration to a file whose file equation uses an
unsupported device. Possibly, the file name is file equated to a tape
device.
850 Received security violation error while attempting to save file.
(HPBW 850)
You attempted to copy a portion of a file (using the print command) or
attempted to save the configuration to a group for which HP Browse lacks
write access. You may have inadvertently attempted to save text to
another account.
860 Invalid file reference specified. (HPBW 860)
MPE rejected one or more components of the requested file name. You may
have misspelled the file name.
870 Received a file system error (!) while attempting to save file.
(HPBW 870)
HP Browse received a file system error XXX while attempting to save a
configuration file or a print file. Please check your logon user, group,
and account capabilities. If these capabilities are correct, please
contact HP support; investigation is required.
880 File being accessed and cannot be overwritten. (HPBW 880)
The configuration file or the print file is being accessed by another
process and cannot be overwritten.
890 Unable to purge the old file. Kept to temporary file instead. (HPBW
890)
The old configuration file or a disk file specified in the print command
could not be purged. Instead, HP Browse kept the file as a temporary
file with the same name. Possibly the file was being accessed by another
program at the same time.
900 Invalid exponent. (HPBW 900)
This is not a user error. HP Browse encountered an invalid exponent.
Please contact HP support; investigation is required.
1040 Invalid number entered. (HPBW 1040)
You entered an invalid line number for this file format (for example,
entered 1.123 for an unnumbered file). Check the line number format for
this file before reentering a line number.
1310 Unable to read disk record XXX (line XXX). (HPBW 1310)
This is not a user error. HP Browse encountered an error while
attempting to read record XXX, which corresponds to line XXX. Please
contact HP support; investigation is required.
1350 Only two windows can be open at one time. (HPBW 1350)
HP Browse supports a maximum of two screen windows.
1360 The upper window is too small. (HPBW 1360)
There must be at least one line of text above the cursor in order to open
a new window.
1370 The lower window is too small. (HPBW 1370)
There must be at least one line of text below the cursor in order to open
a new window.
1380 Invalid yes response from the message catalog. (HPBW 1380)
This is not a user error. HP Browse could not read the "yes" response
from the message catalog. Please contact HP support; investigation is
required.
1390 Unable to read your response - NO assumed. (HPBW 1390)
This is not a user error. HP Browse encountered an error while
attempting to read a yes/no question. HP Browse assumed the answer was
no. Please contact HP support; investigation is required.
1430 Unable to read the help catalog directory. (HPBW 1430)
This is not a user error. HP Browse encountered an error while
attempting to read the help catalog directory. Please contact HP
support; investigation is required.
1440 Unable to get information about the help catalog. (HPBW 1440)
This is not a user error. HP Browse encountered an error while
attempting to get information about the help catalog. Please contact HP
support; investigation is required.
1450 No user labels in the help catalog. (HPBW 1450)
This is not a user error. The HP Browse help catalog has an improper
format; it is lacking user labels. Please contact HP support;
investigation is required.
1460 Invalid keyword "XXX" found in the help catalog. (HPBW 1460)
This is not a user error. HP Browse encountered the invalid keyword XXX
in the help catalog. Please contact HP support; investigation is
required.
1470 Read of help catalog failed on record XXX. (HPBW 1470)
This is not a user error. HP Browse encountered an error while
attempting to read record XXX in the help catalog. Please contact HP
support; investigation is required.
1480 Topic "XXX" is not in the help catalog. (HPBW 1480)
This is not a user error. HP Browse could not locate topic XXX in the
help catalog. Please contact HP support; investigation is required.
1490 XXX is not a valid topic number. (HPBW 1490)
The topic numbered XXX does not exist. Enter a number listed on the
Topics screen.
1495 XXX is not a valid function number. (HPBW 1495)
The function numbered XXX does not exist. Enter a number listed on the
Function Description screen.
1500 There is no next page. (HPBW 1500)
The only page or last page of the current topic is being displayed.
There is no next page to display.
1520 Unknown command "XXX". (HPBW 1520)
HP Browse does not accept XXX as a valid command.
1530 Unable to open help catalog : XXX. (HPBW 1530)
This not a user error. HP Browse could not open the help catalog: XXX.
The help system cannot be accessed without first opening the help
catalog. Make sure the help catalog is installed properly.
1540 Unable to read the number of help topics. (HPBW 1540)
This is not a user error. HP Browse encountered an error while
attempting to open the number of help topics from the help catalog.
Please contact HP support; investigation is required.
1550 Received error XXX when attempting to open function key file. (HPBW
1550)
This is not a user error. HP Browse encountered an error while
attempting to open the file where the function keys are preserved. XXX
is the error MPE returned to HP Browse. Please contact HP support;
investigation is required.
1560 Received error XXX writing to function key file. (HPBW 1560)
This is not a user error. HP Browse encountered an error while
attempting to write to the file where the function keys are preserved.
XXX is the error MPE returned to HP Browse. Please check your logon,
user, group, and account capabilities. If these capabilities are
correct, please contact HP support; investigation is required.
1570 Received error XXX writing EOF to function key file. (HPBW 1570)
This is not a user error. HP Browse encountered an error while
attempting to write an End Of File character to the file where the
function keys are preserved. XXX is the error MPE returned to HP Browse.
Please check your logon, user, group, and account capabilities. If these
capabilities are correct, please contact HP support; investigation is
required.
1580 Received error XXX closing function key file. (HPBW 1580)
This is not a user error. HP Browse encountered an error while
attempting to close the file where the function keys are preserved. XXX
is the error MPE returned to HP Browse. Please check your logon, user,
group, and account capabilities. If these capabilities are correct,
please contact HP support; investigation is required.
1590 Received error XXX opening function key file. (HPBW 1590)
This is not a user error. HP Browse encountered an error while
attempting to open the file where the function keys are preserved. XXX
is the error MPE returned to HP Browse. Please contact HP support;
investigation is required.
1600 Received error XXX rewinding function key file. (HPBW 1600)
This is not a user error. HP Browse encountered an error while
attempting to rewind the file where the function keys are preserved. XXX
is the error MPE returned to HP Browse. Please contact HP support;
investigation is required.
1610 Received error XXX reading from function key file. (HPBW 1610)
This is not a user error. HP Browse encountered an error while
attempting to read from the file where the function keys are preserved.
XXX is the error MPE returned to HP Browse. Please contact HP support;
investigation is required.
1620 Received error XXX when attempting to reopen function key file.
(HPBW 1620)
This is not a user error. HP Browse encountered an error while
attempting to reopen the file where the function keys are preserved. XXX
is the error MPE returned to HP Browse. Please contact HP support;
investigation is required.
1650 Unable to open localized message catalog; using Native-3000. (HPBW
1650)
This is not a user error. HP Browse encountered an error while
attempting to open the localized message catalog. The Native-3000
message catalog was found and will be used. Please contact HP support;
investigation is required.
1660 Unable to open the localized help catalog; using Native-3000. (HPBW
1650)
This is not a user error. HP Browse encountered an error while
attempting to open the localized help catalog. The Native-3000 help
catalog was found and will be used. Please contact HP support;
investigation is required.
1670 Unable to get the text language; using Native-3000. (HPBW 1670,
XXX)
This is not a user error. HP Browse encountered an error while
attempting to retrieve the text language number. XXX is the error MPE
returned to HP Browse. Please contact HP support; investigation is
required.
1680 Unable to get the decimal separator character. (HPBW 1680)
This is not a user error. HP Browse encountered an error while
attempting to retrieve the local decimal separator character. Please
contact HP support; investigation is required.
1690 Unable to construct the help catalog filename. (HPBW 1690, XXX)
This is not a user error. HP Browse encountered an error while
attempting to append the language ID to the help catalog file name.
Please contact HP support; investigation is required.
1730 Unable to open text message catalog : XXX. (HPBW 1730)
This is not a user error. HP Browse encountered an error while
attempting to open the message catalog (XXX) for a particular language.
Please contact HP support; investigation is required.
1750 Command is not programmatically executable. (HPBW 1750)
The command entered from the MPE command interface is not
programmatically executable. The desired command must be run directly
from MPE and not from within HP Browse.
1820 Warning: The message catalog does not match program version. (HPBW
1820)
This is not a user error. HP Browse encountered an error while checking
the version of the message catalog. The message catalog version does not
match the version of the program. HP Browse will still attempt to run
but some error messages may be incorrect or may not be found. HP Browse
may not have been installed correctly. Try reinstalling HP Browse. If
there is no change after reinstallation, please contact HP support;
investigation is required.
1840 No occurrences found. (HPBW 1840)
No occurrences were found for the defined search pattern.
1850 Only one occurrence found. (HPBW 1850)
Only one occurrence was found for the defined search pattern.
1860 Only XXX occurrences found. (HPBW 1860)
XXX occurrences were found for the defined search pattern.
1890 Invalid lockword specified. (HPBW 1890)
The lockword you specified did not match the lockword for the file.
Check the spelling of the lockword and try again.
1900 Received security violation opening XXX. (HPBW 1900)
You don't have the security access capabilities to read the file.
1910 Unable to open file XXX. (HPBW 1910,XXX)
The file you are trying to access does not exist.
1920 Unable to update temporary file. File system error XXX. (HPBW 1920)
This is not a user error. HP Browse encountered an error while
attempting to update the temporary file HP Browse created to browse a
variable length record file. Check the file system error to see if the
problem was a disk space problem. If the problem is not due to limited
available disk space, please contact HP support; investigation is
required.
2000 Could not run requested program. CREATEPROCESS error nnn. (HPBW
2000)
This is not a user error. The MPE intrinsic CREATEPROCESS failed.
Contact your system administrator. If your system administrator cannot
resolve the problem, contact HP support; investigation is required.
2010 A program file name was not entered. (HPBW 2010)
A program name was not entered after the RUN command. Retype the RUN
command and follow it with a program name.
2020 Expecting an entry point after the program name. (HPBW 2020)
A comma followed the program name for the RUN command without an entry
point specified for the program.
2030 Quotation marks on INFO parameter do not match. Expecting (!).
(HPBW 2030)
The INFO parameter on the RUN command must have matching quotation marks
surrounding the data for the parameter. Only one quotation mark was
specified.
2040 Quotation marks (' or ") must surround INFO string. (HPBW 2040)
The INFO parameter of the RUN command must have matching quotation marks
surrounding the data for the parameter.
2050 Invalid RUN option ('!') found in RUN command. (HPBW 2050)
The RUN command has a parameter that is not valid.
2060 Value following 'STACK=' is invalid. (HPBW 2060)
The value entered is greater than 32767 or contains a non-numeric value.
2070 Value following 'DL=' is invalid. (HPBW 2070)
The value you entered is greater than 32767 or contains a non-numeric
value.
2080 Value following 'MAXDATA=' is invalid. (HPBW 2080)
The value you entered is greater than 32767 or contains a non-numeric
value.
2090 Value following 'PARM=' is invalid. (HPBW 2090)
The value you entered is greater than 32767 or contains a non-numeric
value.
2100 Value following 'LIB=' is invalid. (HPBW 2100)
The only values that are valid for the LIB parameter are 'P', 'G', and
'S'.
2110 Expecting the string 'NEW' after STDLIST file reference. (HPBW
2110)
The use has entered a comma after the STDLIST file reference without
entering the string 'NEW'. Either enter the string 'NEW' after the comma
or change the comma to a semicolon (;).
2120 Value following 'STDIN=' is invalid. (HPBW 2120)
The value entered after the 'STDIN=' RUN option is not a valid file
reference.
2130 Value following 'STDLIST=' is invalid. (HPBW 2130)
The value entered after the 'STDLIST=' run option is not a valid file
reference.
2140 The string following the 'INFO=' run option is greater than 256.
(HPBW 2140)
The maximum allowable string length for the 'INFO=' run option is 256
characters.
2150 The program file name is too long. Maximum of 40 characters. (HPBW
2150)
The maximum allowable program file name is 40 characters.
2160 Expecting a semicolon (;). Found (!) instead. (HPBW 2160)
Expecting a semicolon between run options. Found the displayed string
instead. Insert a semicolon between the run options.
2200 Out of system resources (PCB's, DST's, etc.). (HPBW 2200)
This is not a user error. There are not enough system resources to
execute the RUN command. Contact your system administrator.
2210 Program does not exist. (HPBW 2210)
The program you are trying to run does not exist.
2220 Not a valid program file. (HPBW 2200)
The program you are trying to run is not a valid program file.
2230 Process could not be loaded due to a hard load error. (HPBW 2230)
The program you are trying to run cannot be executed. Try running the
program outside of HP Browse to identify the problem. Let your system
administrator know of this problem.
2240 Could not open the specified STDIN file. (HPBW 2240)
The STDIN file you specified in your RUN command could not be opened.
Check to see that the file exists and is accessible.
2250 Could not open the specified STDLIST file. (HPBW 2250)
The STDLIST file you specified in your RUN command could not be opened.
Check to see that the file exists and is accessible or that your file
equation is valid.
2260 Entry point for program does not exist. (HPBW 2260)
The entry point specified for the program given in the RUN command does
not exist for that program.
2270 Missing equal sign (=) after RUN parameter. (HPBW 2270)
One of the parameters after the RUN command was expecting an equal sign,
but none was found.
2280 Expecting data to follow the equal sign (=). (HPBW 2280)
One of the parameters after the RUN command was expecting data to follow
the equal sign.
9980 Internal error XXX. Please report. (HPBW 9980)
This is not a user error. This is a general purpose internal error
message used by HP Browse. XXX is the number of the internal message.
Please contact HP support; investigation is required.