HP 3000 Manuals HP 3000 Manuals
ALLBASE/SQL Error Messages (Cont.)
31900 MESSAGE Invalid login in NETUsers file. (DBERR 31900)
CAUSE Incorrect syntax for server login in NetUsers file.
ACTION Check 'Idtfy_clnt INVALID LOGIN' message in server
log file hpdanslg.pub.sys for server login used.
Run NETUtil to correct server login.
----------------------------------------------------------------------------
31901 MESSAGE Error obtaining passwords for server login.
(DBERR 31901)
CAUSE Internal error. Errors could be in obtaining
server process id, building or accessing temporary
file or executing MPE/iX commands: LISTUSER,
LISTACCT. LISTGROUP.
ACTION Check 'Get xxx Passwd' message in server log file
hpdanslg.pub.sys (where xxx = user, account or
group) for more specific information.
----------------------------------------------------------------------------
31902 MESSAGE Server login does not exist on server node.
(DBERR 31902)
CAUSE Specified user, account or group does not exist on
server.
ACTION Check 'Get xxx Passwd - No such login' message in
server log file hpdanslg.pub.sys (where xxx = user,
account or group) to determine which part of login
failed. Have system or account manager create
account, user or group or use NETUtil to change
server login.
----------------------------------------------------------------------------
31903 MESSAGE Error streaming server job. (DBERR 31903)
CAUSE Internal error. Errors could be in obtaining
process id, building or accessing temporary file or
streaming temporary job.
ACTION Check 'Server' message in server log file
hpdanslg.pub.sys for more specific information.
----------------------------------------------------------------------------
31904 MESSAGE Error obtaining home group for server login.
(DBERR 31904)
CAUSE Internal error. Errors could be in obtaining
server process id, building or accessing temporary
file or executing MPE/iX commands: LISTUSER,
LISTACCT. LISTGROUP.
ACTION Check 'Get xxx Passwd' message in server log file
hpdanslg.pub.sys (where xxx = user, account or
group) for more specific information.
----------------------------------------------------------------------------
31905 MESSAGE No home group specified for server login. (DBERR
31905)
CAUSE You did not specify a group in the NETUsers file
for the mapped server login, and no home group was
set up for the server login either.
ACTION Use the MPE/iX ALTUSER command to add a home group
for the server login, or specify a login group for
the server login in the NETUsers file. for more
specific information.
----------------------------------------------------------------------------
31992 MESSAGE Corresponding ALLBASE/NET error not found for
error (!) (DBERR 31992)
CAUSE An error number has been generated that cannot be
handled by the client.
ACTION Record as much information as possible and contact
your HP Service Representative or Response Center.
----------------------------------------------------------------------------
31994 MESSAGE No entry found in password file on server node.
(DBERR 31994)
CAUSE The user name you specified by the PC API logon is
not defined on this server.
ACTION Verify that the user name sent by the PC is the
correct user name. If it is the correct user name,
add it to the server's password file.
----------------------------------------------------------------------------
31995 MESSAGE Hostname not found or the hosts file cannot be
opened. (DBERR 31995)
CAUSE The hostname cannot be found in the HOSTS.NET.SYS
file or the HOSTS.NET.SYS file does not exist.
----------------------------------------------------------------------------
31996 MESSAGE The protocol file cannot be opened or the
protocol name 'tcp' is not found. (DBERR 31996)
CAUSE The PROTOCOL.NET.SYS file does exist or 'tcp' is
not in the PROTOCOL.NET.SYS file.
ACTION Ask the system administrator to set up the file or
to correct the file. Refer to the LAN installation
manual for information on this file.
----------------------------------------------------------------------------
31997 MESSAGE The services file cannot be opened or the profile
for 'DAServer' is not in the services file. (DBERR
31997)
CAUSE The SERVICES.NET.SYS file does not exist or the
definition of the ALLBASE/SQL RDA server is not in
the SERVICES.NET.SYS file.
ACTION Ask the system administrator to set up the services
file or to correct the file. Refer to the LAN
installation manual for information on this file.
----------------------------------------------------------------------------
31998 MESSAGE Remote hpsqlproc process terminated prematurely.
(DBERR 31998)
CAUSE The server process terminated before the
application finished.
ACTION Restart the application.
----------------------------------------------------------------------------
31999 MESSAGE The data communication service is undefined.
(DBERR 31999)
CAUSE The data communication type you specified in the
AliasDB file is undefined
or
an abnormal situation occurred.
ACTION Correct the profile in the AliasDB file or
contact your HP Service Representative or Response
Center.
----------------------------------------------------------------------------
33001 MESSAGE LU 6.2 Security Error. (DBERR 33001)
CAUSE The IBM system has rejected the LU 6.2 connection
attempt.
ACTION Correct the security parameters specified in the
NETUtil AliasDB file entry.
----------------------------------------------------------------------------
33003 MESSAGE LU 6.2 Send not allowed, partner LU has send.
(DBERR 33003)
CAUSE The HP side of the LU 6.2 connection has attempted
a send when a send is disallowed by the protocol.
ACTION This error should not occur. In the event that it
does, transmission errors may have occurred.
Contact your HP service representative or Response
Center.
----------------------------------------------------------------------------
33004 MESSAGE LU 6.2 Communications connection error. ! ! .
(DBERR 33004)
CAUSE The APPC LU 6.2 routines have detected a
communications error.
ACTION Follow the action described for this code in the HP
LU 6.2 API Reference manual. A brief summary of
the error codes may be obtained by issuing the
command "print catappc.pub.sys." Certain LU 6.2
codes may indicate problems with the connection
layers. For example
2 APPC does not have a NAU available for
this connection request. The
APPCCONTROL SESSIONS can be used to
dynamically increase the number of
sessions that APPC attempts to start,
but VTAM must be configured to allow the
increase.
19 APPC is not active
-9117 the connect between CICS and DB2 may not
be active.
----------------------------------------------------------------------------
33121 MESSAGE Invalid function for foreign access. (DBERR
33121)
CAUSE The function is not available for foreign access.
There are two possible cases for this situation to
occur: 1) An attempt has been made to call a
Switch routine that is not valid for foreign access
or
2) FDA cannot identify the SQL function in the
statement being compiled.
ACTION If connected to a foreign DBE, use only those
commands that are valid for foreign access.
----------------------------------------------------------------------------
33123 MESSAGE No DBEnvironment connected. (DBERR 33123)
CAUSE Connection to a foreign DBE is expected but not
found.
ACTION Establish the connection to a foreign DBE.
----------------------------------------------------------------------------
33124 MESSAGE Already connected to a DBE. (DBERR 33124)
CAUSE An attempt has been made to connect to a DBE while
already connected to a foreign DBE.
ACTION Release the current DBE connection before
connecting to a DBE.
----------------------------------------------------------------------------
33350 MESSAGE Database server error !. (DBERR 33350)
CAUSE Database server has detected an error.
ACTION Record the database server error number and refer
to the list of database server errors,
or
contact your HP Service Representative or Response
Center.
----------------------------------------------------------------------------
33351 MESSAGE Receiving message length is not long enough.
(DBERR 33351)
CAUSE The size of the message buffer is not large enough
to receive the message from the database server.
ACTION Increase the LU6.2 Input Buffer Length value of the
alias definition in the AliasDB file.
----------------------------------------------------------------------------
33352 MESSAGE The send message length is not long enough.
(DBERR 33352)
CAUSE The size of the message buffer is not large enough
to send the message to the database server.
ACTION Increase the LU6.2 Output Buffer Length of the
alias definition in the AliasDB file.
----------------------------------------------------------------------------
34004 MESSAGE Cannot start session. (RC !, !, !, !) (DBERR
34004)
CAUSE An unexpected error was encountered when trying to
connect to the DBEnvironment.
ACTION Look for an additional message that provides more
information.
----------------------------------------------------------------------------
34005 MESSAGE Cannot terminate session. (RC !, !, !, !) (DBERR
34005)
CAUSE An unexpected error was encountered when trying to
release from the DBEnvironment.
ACTION Look for an additional message that provides more
information.
----------------------------------------------------------------------------
34006 MESSAGE DBCORE error. (FNC !, RC !, !, ! !) (DBERR
34006)
CAUSE An unexpected internal error was encountered.
ACTION Record as much information as possible and contact
your HP Service Representative or Response Center.
----------------------------------------------------------------------------
34008 MESSAGE Unexpected INTERNAL error. (!, !, !, !) (DBERR
34008)
CAUSE An unexpected internal error was encountered.
ACTION Record as much information as possible and contact
your HP Service Representative or Response Center.
----------------------------------------------------------------------------
34009 MESSAGE Cannot attach to shared memory (RC !, !) (DBERR
34009)
CAUSE An unexpected error was encountered.
ACTION Record as much information as possible and contact
your HP Service Representative or Response Center.
----------------------------------------------------------------------------
34010 MESSAGE Cannot detach from shared memory (!) (DBERR
34010)
CAUSE An unexpected error was encountered.
ACTION Record as much information as possible and contact
your HP Service Representative or Response Center.
----------------------------------------------------------------------------
34011 MESSAGE Cannot fcontrol $STDINX. (! !) (DBERR 34011)
CAUSE An MPE/iX file system error was encountered.
ACTION Refer to the MPE/iX Error Message Manual, Volume 1.
----------------------------------------------------------------------------
34013 MESSAGE Unexpected PROCINFO error. (PIN=!, !, !) (DBERR
34013)
CAUSE An unexpected error was encountered while trying to
get the name of the program that the user is
running.
ACTION Contact your system administrator.
----------------------------------------------------------------------------
34020 MESSAGE Cannot allocate memory for data buffer structure
(! !, !) (DBERR 34020)
CAUSE An unexpected error was encountered.
ACTION Contact your system administrator.
----------------------------------------------------------------------------
34021 MESSAGE Cannot get data buffer pool head! (DBERR 34021)
CAUSE An unexpected error was encountered while trying to
find the data buffer pool in memory.
ACTION The database administrator might have issued a STOP
DBE statement. If not, record as much information
as possible and contact your HP Service
Representative or Response Center.
----------------------------------------------------------------------------
34022 MESSAGE Number of data buffers not equal to DBECON value!
(!, !, !) (DBERR 34022)
CAUSE The size of the data buffer pool in memory does not
match the size that is recorded in the DBECON file.
ACTION Record as much information as possible and contact
your HP Service Representative or Response Center.
----------------------------------------------------------------------------