HP 3000 Manuals HP 3000 Manuals
Exercise 4:Leaving BRW
As you work through the BRW tutorial, you use many different screens.
You can leave BRW at any time during the session. However, if you plan
to continue to the next section, do not leave BRW at this time.
Leave BRW
1. Press Exit from any screen in the application.
2. Press Exit again until you reach the Select Report screen.
3. At the Select Report screen, press Exit BRW.
You are prompted if you need to save any changes you have made.
(If you haven't made any changes, skip the next step.)
4. Respond to the prompt (Y or N).
5. Press Enter.
You return to the MPE prompt.
NOTE When you are in BRW, use the terminal Enter key, not the Return
key. If you access BRW through a terminal emulation program from a
PC, the PC Enter key has no effect in BRW. Use the Enter key on the
keypad.
Lesson 1: Quiz 1
Please answer the following questions. The solutions to most of these
questions are supplied in Appendix A; however, some of the answers must
be supplied by your database administrator or system manager.
This quiz covers exercises 1 to 4 of Lesson 1.
1. What is the name of the sample database you will use for this
tutorial?
2. Where is the sample database located?
3. What is the name of the data dictionary you will use for the
sample database?
4. Is the data dictionary located in the PUB group of the account
where your data resides?
5. Are there any special login or connection instructions you need to
know for your MPE system?