HP 3000 Manuals HP 3000 Manuals
Using SYSFILE Configurator Commands
The SYSFILE configurator commands perform five actions (add, delete,
replace, list, and specify) on eight objects (autoboot image, boot image,
compatibility mode segmented library (CMSL), system program, system
catalog, network configuration (NETWORK CONFIG), initial program loader
(IPL) image, and native mode library (NM LIBRARY)). In addition, the
SYSFILE configurator provides other commands, some of which are common to
other SYSGEN configurators: CLEAR, EXIT, HELP, HOLD, OCLOSE, and the
colon (:).
Table 8-1 shows a command matrix of the add, delete, replace, list, and
specify commands. The objects are listed from top to bottom, and the
actions are listed from left to right.
Table 8-1. SYSFILE Configurator Command Matrix
-------------------------------------------------------------------------------------------------------
| | | | | | |
| | ADD | DELETE | REPLACE | LIST | SPECIFY |
| | | | | | |
-------------------------------------------------------------------------------------------------------
| | | | | | |
| AUTO BOOT | AAUTO | DAUTO | RAUTO | | |
| IMAGE | | | | | |
| | | | | | |
-------------------------------------------------------------------------------------------------------
| | | | | | |
| BOOT IMAGE | ABOOT | DBOOT | RBOOT | | |
| | | | | | |
-------------------------------------------------------------------------------------------------------
| | | | | | |
| CM SL SEGMENT | ACMSL | DCMSL | RCMSL | LCMSL | CMSL |
| | | | | | |
-------------------------------------------------------------------------------------------------------
| | | | | | |
| SYSTEM PROGRAM | ASPROG | DSPROG | RSPROG | | |
| | | | | | |
-------------------------------------------------------------------------------------------------------
| | | | | | |
| SYSTEM CATALOG | | | RCAT | | |
| | | | | | |
-------------------------------------------------------------------------------------------------------
| | | | | | |
| NETWORK CONFIG | | | RDCC | | |
| | | | | | |
-------------------------------------------------------------------------------------------------------
| | | | | | |
| IPL IMAGE | | | RIPL | | |
| | | | | | |
-------------------------------------------------------------------------------------------------------
| | | | | | |
| NM LIBRARY | | | RNMLIB | | |
| | | | | | |
-------------------------------------------------------------------------------------------------------
All commands have a two- or three-character abbreviation.
NOTE The examples used to demonstrate SYSFILE configurator commands may
produce display screens that do not exactly match output from your
system. What SYSGEN displays depends entirely on how your system
is configured.
[REV BEG]
CAUTION Do not use the SYSFILE> RSPROG command to rename Hewlett-Packard
supplied MPE/iX HP 3000 system files. A renamed system file can
corrupt your system during an update. This problem can occur if
you have third party software installed on your system and you
have renamed some system files to use this software.
Use the SHOW command in SYSFILE to ensure that all
Hewlett-Packard supplied system files have retained their
original name. System filenames in both columns should be
identical. If they are not identical, rename the files in the
second column to the filename in the first column.
[REV END]